Inokim OX asi bac855 FULL INSTALLATION GUIDE PART 1
HTML-код
- Опубликовано: 8 сен 2024
- THE ONE AND ONLY, ASI CONFIG FILE FOR OX: *WARNING ! ! ! ONLY FOR VER 6.* **
drive.google.c...
if this helped you to solve your config issues, any donations will be appreciated, as i am not a student and dont have the amount of income i used to, so i share this file asking for nothing officially, but any donation will be appreciated.
MY PAYPAL LINK :
shorturl.at/egjFS
HARNESS DIAGRAM:
drive.google.c...
Hey guys, today i am revealing every single bit of the installation and config.
i am giving all my 2+ years of experience for free, which included tons burnt controllers, sleepless nights and a lot of stress :D.
As i am about to start my engineering studies in a few weeks, i am cutting my income almost in half. If this video helped you in any way, and you feel that i have contributed to your build or asi config, DONATION of any amount would be really appreciated and motivating for continuing sharing the knowledge.
paypal.me/LevLeon
Bafang cable :
www.alibaba.co...
Matching higo connectors :
www.alibaba.co...
( notice, this one require an order of 100pcs min, but you can definitely scout the same connectors online not on a wholesale )
Asi bac 24pin connector:
www.digikey.co...
fitting terminals:
JST Connector SPH-001T-P0.5L
Crimp tool:
www.aliexpress...
Throttle:
www.aliexpress...
5dcdc converter ( takes up to 120v)
www.aliexpress...
24PIN asi terminal pinout
www.accelerate...
i've said that female connectors are always on the output side of the electronics, but there was a slight mistake in the video, the positive and the negative cables, are inputs ! means they're waiting for the current from the battery! means it is suppose to be male connector. all this is just for a future precautions.
חחח יא גאון, הייתה לי תחושה שאתה ישראלי.
בהצלחה עם הערוץ, רק עכשיו קניתי אינוקים OX 13 AMP. אשמח לדעת אם אפשר להביא אותו אלייך לשדרוג ליותר כוח בעליות.
למה לא. תתחיל מסוללה קודם. מקוריות לא שוות כלום
שמע אתה אלוף
u are a king אין אתה תותח ומצטער שמציק לך בווטסאפ 😘
למה לחתוך אתץ הוידאו בעמצה להסביר עד הסוף
@@YosefElgart על מה בדיוק מדובר? הסוף של הוידאו ?
Brilliant video, fella. Very informative and well put together. I've just picked up an Oxo and wondered, if you know, is the upgrade process similar to your Ox? I was looking at picking up the ASI Bac 855 duel controllers and 72v battery but not sure how easy is to replace. Also, when upgrading the controller did you need to do anything with the motors? Thanks 😊👍
Same process yeah. Motors stays the same. Maybe some Ferrofluid for cooling, nothing more .
@@SUB13333 You are a legend. Thanks fella 🙏😉
Amazing bro!
Very helpful ! do you also have a diagram of the exact wiring you did ? the link to your diagram doesn’t work anymore
@@aeskellion sorry it was a long time ago, I now have employee that does that, maybe I’ll upload a clearer and much shorter video soon !
@@SUB13333 oh that would be great ! I have a Super73 and I want to get a BAC855 but the wiring diagram provided by ASI is a little bit confusing… and I don’t want to fry the controller accidentally.
Hay bud do you have contact information ? Could use good advice thanks bud. Would like to keep it private.
Hi sir, I am hoping to pay you to do for me all this bundle so I can install it on my inokim oxo.
Let me know if this is possible
Where are you from
@@SUB13333 Canberra Australia
@@SUB13333 I am happy to pay for shipping not an issue.
שלום אחי אני מתקשה בחיבור של הקונקטור לאן הסנסורים ולאן הידית גז תוכל לעזור לי לדעת איפה זה כל דבר בחיבור שלו?
Link of arnes diagram its down bro
how much did you cost for ASI BAC 855..its ok to put this also in inokim eco 48v 21amps
Hey fella, can I ask a quick question? I've got the Oxo and recently upgraded the battery (72v), controllers (Asi Bac 855s) and throttle (750c display etc). It drives amazing but after about 5/10 mins the front motor stops working and I get a 'error 21h'' (display still on but no power to front motor). The rear motor continues to work fine and if I turn off / on the display the front motor starts working again...for about 5 mins. Did you have this issue when upgrading your Ox? if so, how did you fix it? Thanks again 😉👍
Well, I got a golden rule not to use any displays with this controller because there's a lot of miscommunication between the both, doesn't matter which type. You need to get access ( which is also a pita because asi won't give it to you easily ), then in the app you'll be able to see more specific reason for this issue . I've built probably more than 100 of these so I kinda seen all errors . But I need to know which is it.
@@SUB13333 Thanks man. I bought it all as a kit from the brilliant guys at: 'taisomirgaminam' (www.taisomirgaminam.lt/en/product/asi-bac-855-pp-inokim-oxo/), where the 750 was an option. Might give them a wee shout and see if they have seen similar issues in previous kits they've installed/sold (I can't be the only one). Will post an update here and let you know how I got on, fella. Thanks again! 👍
Update: Finally resolved the issue. Display must be wired to the rear controller/motor and throttle wired to both front and back controller/motor. Then a little tweak via the 'Bacdoor' app and all working fine, thank god. Crazy powerful now though - on mode 3 it wants to rip my arms off but on mode 5 it just lights up both wheels no matter how fast you are going. Have to say though, with all that power the throttle is still very user friendly. You can easily maintain a low constant speed, which is way better than the standard Oxo throttle which I found very twitchy when running both motors. Thanks for the help though buddy and as always, love the vids/work. 😎👍
@@crazylikeafox7290 appreciate the update , yes , this is the awesome parts in smart controllers , power modes irrelevant because throttle is sensitive for maintaining any type of speeds. Enjoy the ride!
I am in a lot of projects right now, hopefully soon I'll have enough time to upload some new content!!
@@SUB13333 Thanks man. And that would be awesome. Love your vids, more so on that ever evolving monster Ox of yours. 🛴💨😎👌
אתה גאון ואפשר לדעת איך קוראים לחנות שאתה עוסק בה או איך אפשר להגיע עלייך?
0502908600 WHATSAPP ONLY
אתה עושה התקנה של בקר אסי לאינוקים ox 48v21
כמה יעלה הרכבה של בקר אסי 855 בסדנה שלך?
לא עושה יותר :)