@@tmoftw6891 No what I mean is that it was pounding pretty hard and wasn't wired down to 1 ohm or 2 ohm. I have the 3k in one car. I have 3 soundqubed 8's and I am considering the 5k at 1 ohm.
Nice set up I have the same truck trying to figure out what subs I'm going with!! Got 10s going in the doors for mid bass and compressor horns stupid loud on the way💪🏾💪🏾💪🏾
@@e40-l6l Thought so i aint knockin the EVL I MISS MINE!! Never had an issue always FAITHFUL to me and the thing i LIKED was you do not neeed a ton of poer to move em I had mine first on a PPI black ice 7000d and they were banging then put em on my new at the time Sundown SCV 6K And had them on it for like 2 weeks and thought for sure cause I was clamping 5600 on em they were gonna blow but didnt! The guy sold them to got em on a 3k Deaf Bonce in his little integra walled doing a 152.3 with a CES 270 tearing the integra up.... So yeah i think its the glue
@@PeterFeltersnatch852 man i got mine on a skar rp4500 i got the 18s they start to stink i back off on them i get scared thinking they gonna blow i drop to the high 12s at idle and 13 moving so i dont think its clipping
@@BIGJURAY20 hey man thanks for the reply! And yeah they do alright I have the hd 3k it's the older model but I got it for 200 bucks so I cant frown at that 3k @12.6 volts I barely dip to 12.0 only because my second battery is not a agm (I know) after I get a d3100 or 2 in the back and a 2and run of 0g I'm gonna put a 8k in there, already have a 220 amp alt should hold up if I'm careful
Bullshit. Brazilian amps can be underpowered as low as 9v. The myth about them not handling vibration is bullshit to. They last longer than Korean boards for damn sure just don't run them below .7 ohm and there great.
So I have a 2ohm evl and I'm going to upgrade to 2 of them and want to be wired at 1 ohm and can't with 2 subs that are 2ohm. If have to wire it at .5 and don't know any amp that could do that at around 2500rms lol.
@@BIGJURAY20 cause I have 1 of them and I was planning on selling it and getting 2 4ohms so I can run it at 1 ohm but if I can run it at 2ohm I'll just get another 2 ohm sub
Darc Syde lol naw man you good. I personally didn’t consider it a budget build but compared to others lol yea it’s one since most audio guys have over 5k in their build
Taramps puts a lot of amps to shame ..especially a lot of them Korea built amps ..all them companies have the same mother board & charge the hell out of you for the name!!! Yeah skar is cheap budget woofers that sounds good but I personally need more power (rms) handling in my subs (massive audio hippo XXLR 3000 RMS ) one 12 will kill them 2 of them skars
@@FATHERSOFBASS always buying shit... i hope you didnt waste tons on limitless litihium hope you got some yinglong lto or headway!! Hows the WIFE and that BEAUTIFUL SON OF YOURS?
What's better, "Taramps MD" or "Taramps Bass" line? Bass line is more expensive and I believe a bit newer and hits slightly lower but is it worth the extra $100+, anyone know?
Whether the MD Or Bass series really depends on the user. They both make rated power at 40hz below 14v but the Bass series allows for .5 ohm daily play and .25 ohm burps. Taramps also warranties the Bass Series amplifier at the ohm loads. People have ran MD series below 1 ohm with success but i believe by doing so it voids the warranty
Gotcha I thought he was saying he was stock I was thrown back lol. But I have the same subs and was considering the md5000 myself. Thanks for the response
Bill Johnson just not in that application I know people can get like 150s on 1000 watts in very very particular applications usually a huge aero port... this doesn’t look like a burp box tho so I doubt it’s hittin 150s yet
I personally would not run a Brazilian amp below manufacturers intended use. Taramps offer high voltage amplifiers which are very finicky and less tolerable. Even if you factor in impedance rise its not worth it. They are great power makers if used properly but be mindful of the voltage and heat they receive.
Crazy that amp was wired to 4 ohms....nice
Yeah, Taramps actually sells them that way
@@tmoftw6891
No what I mean is that it was pounding pretty hard and wasn't wired down to 1 ohm or 2 ohm. I have the 3k in one car. I have 3 soundqubed 8's and I am considering the 5k at 1 ohm.
Nice set up I have the same truck trying to figure out what subs I'm going with!! Got 10s going in the doors for mid bass and compressor horns stupid loud on the way💪🏾💪🏾💪🏾
Badass bro. I definitely would like to see this. Please be sure to get footage of it on your channel
@@BIGJURAY20 I can't wait myself I'll definitely post a vid of it also new sub here bro🔥🔥🔥
@@aldawson4943 Appreciate the love bro. I'll return thr favor. Looking forward to seeing what u got
Sounds very good and clean
Yes i agree with you very clean sounding system
nice set up playa
this sounded hella clean at the show, cant find him on ig tho
Gaven Brown
I found him on Facebook his system sounds really nice
That bird is just chilling walking like nothing going on
Do you think one of those taramps 5k will be good on a single sundown x15 v.3
I'm sure it'll be more than enough power
For sure
The best thing u can do for any amp is battery reserve on top of the high output alternator
@@BIGJURAY20 I went with crescendo 4k, js 370 amp alt, and 3 xs power batteries
@@tony187soundproof5 That's gonna be a very nice system
I just ordered that same taramps im bout to run 2 G2 genesis 1,200 watt rms subs at 2 ohms
Should pair up nicely
Awesome.
Do you think a Taramp's MD 3000.1 will be good with 2 skar evl 10s
Yes should pair up nicely
Thanks : )
No problem
They have 1ohm and 2 ohm versions of the taramps 3000.1
Yes sure do now with the new Smart 5k might be a good choice as well
them skars do beat good
Yea they get down pretty good
@@BIGJURAY20 had 12 evl they are real musical everything sounded good on em... were they stinky at all mine were when i beat on em
@@PeterFeltersnatch852 mine stinks to is that just how they are
@@e40-l6l Thought so i aint knockin the EVL I MISS MINE!! Never had an issue always FAITHFUL to me and the thing i LIKED was you do not neeed a ton of poer to move em I had mine first on a PPI black ice 7000d and they were banging then put em on my new at the time Sundown SCV 6K And had them on it for like 2 weeks and thought for sure cause I was clamping 5600 on em they were gonna blow but didnt! The guy sold them to got em on a 3k Deaf Bonce in his little integra walled doing a 152.3 with a CES 270 tearing the integra up.... So yeah i think its the glue
@@PeterFeltersnatch852 man i got mine on a skar rp4500 i got the 18s they start to stink i back off on them i get scared thinking they gonna blow i drop to the high 12s at idle and 13 moving so i dont think its clipping
sounds good on my head phones
Got 2 evl 15 at 1 ohm on a taramps 3k in a 6.5ft³ box and a 8 inch areo port tuned to 30hz they need more power
I'm sure it gets down with the setup. Which Taramps 3k do you have?
@@BIGJURAY20 hey man thanks for the reply! And yeah they do alright I have the hd 3k it's the older model but I got it for 200 bucks so I cant frown at that 3k @12.6 volts I barely dip to 12.0 only because my second battery is not a agm (I know) after I get a d3100 or 2 in the back and a 2and run of 0g I'm gonna put a 8k in there, already have a 220 amp alt should hold up if I'm careful
@@jaywalkin8205 Sounds like u know what direction to take. Always good to beef up your electrical to wake up that Beast
@@BIGJURAY20 forsure my man what coast are you on ? Going to any bass events in the near future?
@@jaywalkin8205 Yes going to a competition this weekend. Going to get some footage while I'm there. I'm in Southern California
Neat job …
Nice bro
How much batteries did he have?
That amps life will be short lived
How so?
Bullshit. Brazilian amps can be underpowered as low as 9v. The myth about them not handling vibration is bullshit to. They last longer than Korean boards for damn sure just don't run them below .7 ohm and there great.
So I have a 2ohm evl and I'm going to upgrade to 2 of them and want to be wired at 1 ohm and can't with 2 subs that are 2ohm. If have to wire it at .5 and don't know any amp that could do that at around 2500rms lol.
There are lots of amps that can take .5ohm. But you can also run the pair to 2 ohm as well and there are also amps that are rated for 2 ohm
@@BIGJURAY20 so I can run 2 2ohm subs at 2 ohm? I thought it was only .5 series and 8ohms parallel? Or something like that
@@BIGJURAY20 cause I have 1 of them and I was planning on selling it and getting 2 4ohms so I can run it at 1 ohm but if I can run it at 2ohm I'll just get another 2 ohm sub
Running a dual 2 ohm sub in series makes it 4 ohm
Running a dual 2 ohm in parallel makes it 1 ohm
How much power do u have to your single Evl?
I LOBE SKARRRRRR
What's that song called
Future- Neva End
That's not bad for a budget build 👍👍
That’s not a budget build lol
@@traphemi6308 lol I wasn't trying to clown bro, his music sounds way better than mines right now💯💯
Darc Syde lol naw man you good. I personally didn’t consider it a budget build but compared to others lol yea it’s one since most audio guys have over 5k in their build
Electric?. Batteries?.
Taramps puts a lot of amps to shame ..especially a lot of them Korea built amps ..all them companies have the same mother board & charge the hell out of you for the name!!! Yeah skar is cheap budget woofers that sounds good but I personally need more power (rms) handling in my subs (massive audio hippo XXLR 3000 RMS ) one 12 will kill them 2 of them skars
Nice like mine but beater box 😜
Nice...
DAMN DUDE YOUR EVERYWHERE!! WTF IS UP BUDDY!!
@@PeterFeltersnatch852 thats me brother all oberrr the dam place hahahahahahha
@@PeterFeltersnatch852 i jist bought a 100ah lithium battery
@@FATHERSOFBASS always buying shit... i hope you didnt waste tons on limitless litihium hope you got some yinglong lto or headway!! Hows the WIFE and that BEAUTIFUL SON OF YOURS?
What's better, "Taramps MD" or "Taramps Bass" line? Bass line is more expensive and I believe a bit newer and hits slightly lower but is it worth the extra $100+, anyone know?
Whether the MD Or Bass series really depends on the user. They both make rated power at 40hz below 14v but the Bass series allows for .5 ohm daily play and .25 ohm burps. Taramps also warranties the Bass Series amplifier at the ohm loads. People have ran MD series below 1 ohm with success but i believe by doing so it voids the warranty
Always helps to get ahold of a Taramps Dealer over Facebook for good pricing and details
Also,
Bass does rated power at 14.4 volts.
MD does rated power at 12.6 volts.
I thought they only ran at 1 and 2 ohms?😫
Yes i believe you're right. 1 ohm or 2 ohm versions
They have 4 ohm ratings. These amps pull current so upgraded your electrical
True but they don't pull as much as most amplifiers in the same wattage class
Song??
What was his voltage like on them
Gotcha I thought he was saying he was stock I was thrown back lol. But I have the same subs and was considering the md5000 myself. Thanks for the response
@@tidobass6048 I completely apologize i thought u were asking questions about my Team Captain system from my other video.
@@tidobass6048 In this system he does have a stock alternator i am not sure about his battery but it could be stock as well
What does he meter?
@@tidobass6048 Unfortunately that was never discussed. He doesn't compete
Takes 2/0?
I believe it can
Yes
Sounds nize
What battery do you use for that Amp??? Please
I'm not sure what kind of batteries he was using but if you can get up to 300 ah of agm batteries I'm sure you'll be ok
@@BIGJURAY20 thanks
No Problem
Did you have to wire in a bass knob to the rca wires?
I recommend using a rca Bass knob
2 smart 3s vs 1 smart 5 on 2 American bass Hawks15
I got 2 hawks 15s on Orion 2500.1dz but gonna get the smart 5k
Nice. Bet that does 150 plus
At 4 ohms ? Hell nah man
Bill Johnson just not in that application I know people can get like 150s on 1000 watts in very very particular applications usually a huge aero port... this doesn’t look like a burp box tho so I doubt it’s hittin 150s yet
Anybody know if this amp can be ran at 0.5 ohms or 0.8?
I've heard of people running the Md series at .5ohm with success. Although they aren't recommended for anything under 1 ohm.
I personally would not run a Brazilian amp below manufacturers intended use. Taramps offer high voltage amplifiers which are very finicky and less tolerable. Even if you factor in impedance rise its not worth it. They are great power makers if used properly but be mindful of the voltage and heat they receive.
.7 but u better have damn good electrical.
.5 yes but needs to have good electrical because if it clips at .5 its done
I think dude needs to sell a truck and get a s u v or something
Smart 3 vs md 5000.1
Smart 5k
@@BIGJURAY20 not my question but. Let me ask. 2 smart 3s vs 1 smart 5 on 2 15s American bass
@@J409-t2r 2 Smart 3k
Song title ??