Please explain the physical meaning of the options in granular properties and all other options we are using. Otherwise it becomes hard to understand what we are doing actually.
sir i have question, after initalization popup message said I don't have data and in your video you goes after that file and click data file quantities, that data file quantities are not working in my side, kindly suggest if I am doing mistake.
Your videos are best as always. I'll suggest one topic see if you can make simulation video on this Injection of vaporized water inside a cylindrical chamber with air flowing through inlet. Explanation: there is cylindrical chamber with inlet at one end and outlet at other. Air is flowing through that chamber. There is one injector which injects vaporized water (steam). First the water flows in liquid form and during injection it changes its state to gaseous.
Please, In what order can I follow your videos to comprehensively learn ANSYS Fluent from the scratch. I need to learn it for my finals project for the numerical simulation of atmospheric water generator.
on 13.25 when need to click initialize why it pop up current data has not been saved, including solution data and any report files, animation? and data quamtities file cannot be selected?
By doing DPM injection we are putting the solid paricles into the fluid flow analysis. As in CFD analysis we only use the fluid as the working material, there is nowhere we can use the solid as the flow material, so using DPM, we insert the solid particles into the flow. There are many applications of such DPM injections process.like in chemical plant, for pollution testing , waster water analysis, etc.
Hello, hope you are well and thank you for your video. Is it possible to map the sum of particle volume fraction and the sum of the particle volume at each cell? This is so I can use it as a part of a field function along with other constants and displaying the contour for it. Would appreciate your help. Thank you!
@@AnsysTutor Thank you for your response. I want to be able to write field functions using the particle variables to view these scalars on the contours. The contour plots only displays the particle variables (e.g volume fraction of particles to air) for the particles in the Lagrangian frame i.e you can only see the particles which are coloured by what DPM variable you select in the field function. However, I want to map these DPM variables (e.g volume fraction) onto the volume mesh (Eulerian frame).
@@AnsysTutor I forgot to mention and I hope this clears up my question: In the video you selected file and then data file quantities to select the particle velocity. You then opened CFD post to view it on the contour (Eulerian field). Is it possible for example to write a field function in fluent using this particle velocity, use it for reports/ monitors etc and then viewing this resulting variable in CFD post on the mesh just like you viewed only the particle velocity in the mesh?
Hi sir. Thanks for your very helpfull videos. I have an error: "floating point exception" and recheked all initial variables & BC, but i take the message every time. Can it be because of installation crack or something else...!?
There might be some error while you had set the boundary conditions, reset the fluent setup and setup it again, let me know if the problem is still there.
@@AnsysTutor unfortunately yes. I have more than 9 Million cells mesh size and quality of 0.076. I tried different models, k-e realizable and standard, I tried SST k-w, and laminar. always get floating point error. Can you help please
I cannot Understand anything regarding gradient, and other variables at all. Is there any study material you can suggest me so that I can get an idea regarding Partical flow simulation? pls?
ive been wondering if i were to run a multiphase model nanofluid with al2o3 as solid. should i also follow this way? because with discrete off i cant create aluminiu oxide under fluid cell
Greetings! I have struck in developing a reaction between Methane and Steam in CFD. If you have any content on the chemical reaction at elevated temperature and pressure using species transport and Chemkin thermodynamic, surface reaction files, kindly revert back.
Thank you for your video! I have a question, we have similar simulation but a 3D case, when we put time steps 6000 it takes very long for the calculation(approx 2 hours for 20 time steps), so we pause it. Are we doing something wrong? Or it is supposed to be that long? (Our mesh is fine)
Actually, I want to simulate a jet stream from orifice geometry(pressure atomizer) with liquid water (multi-phase - vapor) later the jet stream should break into DPM droplets so that I can estimate droplet size. Is there any way where I can couple these two, multi-phase and DPM in Ansys Thank You
Thank you so much for the great video! Is it possible to have a single inlet for multiple fluids with different volume fractions? say oil, water, and sand, so that the particle, which is the sand can be injected from the inlet. Thank you in anticipation of your kind response.
Thank you so much. Can u share a simple video tutorial on airborne dust simulation in underground tunnel ? say tunnel dimension 5mX5m and having length of 100m. airflow is 50 m3/s. dust injection rate at a point source in the tunnel may be 0.1g/s.
@@AnsysTutor is there a particular reason why 6000 timesteps was used?? my calculation time was a few hours also and was wondering whether shortening it would have any effects on the results. Many Thanks
Thanks sir for your educative tutorial video. Sir, I will appreciate where you to do a tutorial on multiphase particles using sand and water to monitor the leakage and the flow. Thanks
@@AnsysTutor Thanks so kindly for your prompt response sir. I will be glad as well if you were to share with me your email address in order to give me some important tips in this regards.
hi In CFD-post, only 10 variable is available in contour-geometry. I could not find variable such as air velocity, DPM magnitude, concentration, particle diameter, etc., sometime appears and sometimes not. is here a problem ? Thanks a lot!.
You need to add these in additional quantities while setting in fluent. For this, go to file menu-data file quantities, add the additional quantities, then run the simulation.
@@AnsysTutor I did as shown in the tutorial. let me do again. If i reduce the time steps from 6000 to 100 or 200 for solution, will it affect the variable quantities?
![[CFD] Eulerian Multi-Phase Modelling](http://i.ytimg.com/vi/6BJauDTpCmo/mqdefault.jpg)
My "data file quantities" in Ansys Fluent is inactivated even if I completed initialization. Can you help me please?
Are you using student version?
@@AnsysTutor yes I am using student version now.
Please explain the physical meaning of the options in granular properties and all other options we are using. Otherwise it becomes hard to understand what we are doing actually.
If you cannot click the data file quantities, try this:
go File --> Preferences --> General: Default Format for I/O --> Change it to Legacy --> OK
Thank you for sharing this valuable information.
Thank you a lot!
sir i have question, after initalization popup message said I don't have data and in your video you goes after that file and click data file quantities, that data file quantities are not working in my side, kindly suggest if I am doing mistake.
After you click on "initialize" you could get the datafile quantities option activated.
@@AnsysTutor thank you i will check it again and try to correct my mistake,
@@AnsysTutor Sir, I also face the same issue, I click on initialize but the Data file quantities can't be accessible. Please help sir.
hI IJAZ, DID YOU FIND HOW TO APPEAR THE DATA FILE QUANTITIES AFTER INITILIZATION? I FACE THE SAME PROBLEM WITH YOU..
HOPE U CAN REPLY
@@lindaazahari6011 No i didn't find still pending
i am wondering whether 3d have any different with 2d settings.
hye sir, why i can't set min and max particle diameter in solution animation particle track? it shown 0 m for both max and min? can you help me?
Are you trying in time step animation?
Hello, Thanks for nice video. May I ask why "Add Frozen" in the operation tab of design modeler ?
Add frozen option helps to create two separate entitites. Whereas, "add material" option mix two adjacent bodies into one body.
Your videos are best as always. I'll suggest one topic see if you can make simulation video on this
Injection of vaporized water inside a cylindrical chamber with air flowing through inlet. Explanation: there is cylindrical chamber with inlet at one end and outlet at other. Air is flowing through that chamber. There is one injector which injects vaporized water (steam). First the water flows in liquid form and during injection it changes its state to gaseous.
Will try to make a tutorial if possible.
Please, In what order can I follow your videos to comprehensively learn ANSYS Fluent from the scratch. I need to learn it for my finals project for the numerical simulation of atmospheric water generator.
Follow the playlist Ansys Tutorial for beginners.
it is very nice and instructive. i have a question, is there a way to build a UDF code to calculate the particle history?
You can export the particle track history from fluent, no need of any UDF. Go to file menu-export-particle track
How to get the distribution of particles with depth
on 13.25 when need to click initialize why it pop up current data has not been saved, including solution data and any report files, animation? and data quamtities file cannot be selected?
Are you using Student version?
@@AnsysTutoryup
Hello Sir May you explain little bit more about injections why we create injections. what's its purpose?
By doing DPM injection we are putting the solid paricles into the fluid flow analysis. As in CFD analysis we only use the fluid as the working material, there is nowhere we can use the solid as the flow material, so using DPM, we insert the solid particles into the flow. There are many applications of such DPM injections process.like in chemical plant, for pollution testing , waster water analysis, etc.
Hello, hope you are well and thank you for your video. Is it possible to map the sum of particle volume fraction and the sum of the particle volume at each cell? This is so I can use it as a part of a field function along with other constants and displaying the contour for it. Would appreciate your help.
Thank you!
Could you please explain a little bit more about this .
@@AnsysTutor Thank you for your response. I want to be able to write field functions using the particle variables to view these scalars on the contours.
The contour plots only displays the particle variables (e.g volume fraction of particles to air) for the particles in the Lagrangian frame i.e you can only see the particles which are coloured by what DPM variable you select in the field function. However, I want to map these DPM variables (e.g volume fraction) onto the volume mesh (Eulerian frame).
@@AnsysTutor I forgot to mention and I hope this clears up my question:
In the video you selected file and then data file quantities to select the particle velocity. You then opened CFD post to view it on the contour (Eulerian field). Is it possible for example to write a field function in fluent using this particle velocity, use it for reports/ monitors etc and then viewing this resulting variable in CFD post on the mesh just like you viewed only the particle velocity in the mesh?
can DPM be used to create still particle bed?
Yes.
Please how to calculate thé nombre if stream
Please I need nanoparticles to the phase change materials
Nano particles as DPM injection or with the flow as volume fraction?
Thank you so math for this vedio ,i want to now how to calculate spread parameter
You need to look into ansys theory guide for this.
@@AnsysTutor I can't figure out how to calculate this parameter.
please can you briefly explain the method
How to use the "Particle mass loading" value in Ansys fluent for a gas-particle flow??
Hi sir. Thanks for your very helpfull videos. I have an error: "floating point exception" and recheked all initial variables & BC, but i take the message every time. Can it be because of installation crack or something else...!?
It might be due to some conflicts in the boundary conditions. Mail us to check it ansystutor7@gmail.com.
I have the same issue. Did you solve this problem and can you share your solution with me, please ?
why do i get floating point error when i try this please help?
There might be some error while you had set the boundary conditions, reset the fluent setup and setup it again, let me know if the problem is still there.
@@AnsysTutor unfortunately yes. I have more than 9 Million cells mesh size and quality of 0.076. I tried different models, k-e realizable and standard, I tried SST k-w, and laminar. always get floating point error. Can you help please
I cannot Understand anything regarding gradient, and other variables at all. Is there any study material you can suggest me so that I can get an idea regarding Partical flow simulation? pls?
ive been wondering if i were to run a multiphase model nanofluid with al2o3 as solid. should i also follow this way? because with discrete off i cant create aluminiu oxide under fluid cell
Yes, this procedure should be used for nanofluid injections.
Greetings! I have struck in developing a reaction between Methane and Steam in CFD. If you have any content on the chemical reaction at elevated temperature and pressure using species transport and Chemkin thermodynamic, surface reaction files, kindly revert back.
Thank you for your video!
I have a question, we have similar simulation but a 3D case, when we put time steps 6000 it takes very long for the calculation(approx 2 hours for 20 time steps), so we pause it. Are we doing something wrong? Or it is supposed to be that long? (Our mesh is fine)
In 3D case, the element numbers are more so it would take more time to solve than 2D case.
@@AnsysTutor Thanks for replying!
We solved it by taking 1 time steps with 6000 max iterations per step. We just needed the animation
@@anishakhkyan2251can you please share me the details on how you did it using 3d model??please!!
@@anishakhkyan2251can you please provide the details on how you did it on 3d ? Please
Actually, I want to simulate a jet stream from orifice geometry(pressure atomizer) with liquid water (multi-phase - vapor) later the jet stream should break into DPM droplets so that I can estimate droplet size. Is there any way where I can couple these two, multi-phase and DPM in Ansys
Thank You
Is there any erosion model tutorial with DPM??
Currently, we dont have such a tutorial, we would try to make one.
Sir, can I install both solidworks and ansys on 8gb laptop, if I use 1 software at one time
Yes. There is no problem.
Thank you so much for the great video! Is it possible to have a single inlet for multiple fluids with different volume fractions? say oil, water, and sand, so that the particle, which is the sand can be injected from the inlet. Thank you in anticipation of your kind response.
We have a tutorial regarding the crude oil flow, please watch it.
Thanks, very useful lecture .
So nice of you
How can i change the air flow into a fluid flow? eg kerosene
Change the primary phase material to liquid.
My DATA file quantities option is inactive ..!!! Can you please help
You need to do the initialization first, then after you could get this option.
Hi, I'm a begginer learning Ansys fluent. May I have some simple simulations related to steady state conditions. Thanks n regards!!
ANSYS Tutorials For Beginners: ruclips.net/p/PLykANdmho34zcPPHJ8NSDl8XeUB70jd1A
Is it possible to make particle sedimentation and inlet airflow move particles which is 0 velocity at t=0?
How to get particle velocity in fluent?
How can I measure the volume of droplet in ansys fluent?
Thank you so much.
Can u share a simple video tutorial on airborne dust simulation in underground tunnel ?
say tunnel dimension 5mX5m and having length of 100m.
airflow is 50 m3/s.
dust injection rate at a point source in the tunnel may be 0.1g/s.
It can be done using the same procedure.
@@AnsysTutor
thank u very much.
You are most welcome.
Dear sir, Can you please tell how to plot impact angle and impact velocity contour in CFD Post. I am using OKA erosion model.
Generally how much time does it take to complete the solution ?
About 7-10 hours
@@AnsysTutor is there a particular reason why 6000 timesteps was used?? my calculation time was a few hours also and was wondering whether shortening it would have any effects on the results. Many Thanks
Thanks sir for your educative tutorial video. Sir, I will appreciate where you to do a tutorial on multiphase particles using sand and water to monitor the leakage and the flow. Thanks
Will try to make a video if possible.
@@AnsysTutor Thanks so kindly for your prompt response sir. I will be glad as well if you were to share with me your email address in order to give me some important tips in this regards.
ansystutor7@gmail.com
Sir please make video on asphaltene precipitation by using Ansys fluent
Sorry, don't have knowledge regarding this how to make such simulation.
Sir during 96% simulation I am getting floating point exception. What to do please help me
There might be some error in the input values, please check.
very good, thanks
I AM GETTING FLOATING POINT EXCEPTION ERROR
are you using a vertical axisymmetric model?
@@AnsysTutor NO
@@AnsysTutor I get floating point exception error everytime
hi
In CFD-post, only 10 variable is available in contour-geometry. I could not find variable such as air velocity, DPM magnitude, concentration, particle diameter, etc.,
sometime appears and sometimes not.
is here a problem ?
Thanks a lot!.
You need to add these in additional quantities while setting in fluent. For this, go to file menu-data file quantities, add the additional quantities, then run the simulation.
@@AnsysTutor
I did as shown in the tutorial. let me do again. If i reduce the time steps from 6000 to 100 or 200 for solution, will it affect the variable quantities?
Sir I need to discuss something related to DPM with you . Can you share your mail address?
ansystutor7@gmail.com
what is that stupid music :|
Thank you for the comment, we would try to improvise the music as per your feedback. Thanks again. ❤️❤️❤️