VAN BUILD | FRAMING a RAM PROMASTER
HTML-код
- Опубликовано: 8 ноя 2020
- You guys will get 10% off of any Renogy product if you use my links and I will receive a small commission!
USE CODE RenogySolar10 www.shareasale.com/u.cfm?d=69...
Link to Solar Panels: shareasale.com/r.cfm?b=157786...
Framing out your van is arguably one of the most important steps in building a camper van. You must know what layout you are going with and what areas of the van are going to need the most support. For this van I needed to maximize the space for my RV Queen mattress so not wasting any space there was super important. I also needed to add addition support for future overhead cabinets. Also making sure the walls and ceiling have a seamless transition from front to back.
I hope this information was valuable to you and assists you guys on your build! If you have any questions about how I did something leave me a comment!! I respond to each and everyone!
Thanks for watching!!
INSTAGRAM: / ankeneyvanbuilds
VENMO (incase you feel like buying me a beer): account.venmo.com/u/Colton-An...
PRODUCTS in this VAN: (The amazon links bellow are connected to an affiliate program that allows me to receive a small portion of your purchases. Thanks for supporting the channel!)
SOLAR
-Renogy 100 watt 12v Mono Solar Panel: amzn.to/2U1bhWN
-Yeti 1500X Portable Power Station: amzn.to/3lnOHTR
-blue sea systems SR blade fuse block 12 circuts amzn.to/2UBt9HN
-max output cable :www.goalzero.com/search/?q=ou...
INSULATION
3M Thinsulate Acoustin/Thermal Insulation: amzn.to/2TOwYcN
Spray adhesive: amzn.to/3wwQWpy
MAXXAIR
-Maxx Air 00-07500K MaxxFan Deluxe with Remote - Smoke : amzn.to/2VtWZhY
SWIVEL SEATS
Ram promaster driver/passenger side swivel seat adapters sprinterstore.com
WATER PORT
-suction cup shower head holder: amzn.to/36qwWKT
-Waterport dry tank, bed rail mount, and pump cap
www.waterport.com
HEATER
webasto airtop 2000stc petrol gasoline kit 12v: amzn.to/3k9O6Er
BED:
excel sleep 6' memory foam mattress: amzn.to/3kd5Lei
SINK:
SINK MIDNITE Quartztone Series Granite Dual Mount Bar/Prep Sink, Black" : amzn.to/3hVxayM
SHURFLO 1/2 " pipe strainer amzn.to/2TWVl86
SHURFLO 2088-45540144 fresh water pump 12v 3.5: amzn.to/2TWdW49
Faucet: amzn.to/3e5IPtN
Drain: amzn.to/3AQ41ha
soap dispener: amzn.to/3hVxAFm
STOVE:
Induction Cooktop: amzn.to/3e2CrDK
FRIDGE:
Dometic crx-65 12v dc compressor www.amazon.com/gp/product/B01...
FLOORING:
Applewood laminate flooring (outlast) www.homedepot.com/s/pergo%252...
As an infant in the learning curve of van building and an almost-senior lady doing something so far out of my comfort/knowledge zone, your video (which I've watched 3 times so far) has been so helpful! I'd appreciate a parts list so that I'm sure I'm purchasing what you're suggesting. I've never heard anything but the plus nut/riv nut route with is more complicated and more expensive, so your approach is something much more easily achieved by me. Your tips are worth their weight in gold! Thank you so much for sharing your knowledge in detail! Tremendous video!
I'll echo the comment below about how well made your framing video is. I was thinking about ripping plywood for framing and you've convinced me. Very well done sir and I'll continue following your progress.
Notification bell gang!!! Thanks for watching. Links to everything in this van is in the description. If you found this helpful, LIKE THIS VIDEO AND LEAVE A COMMENT! That is the best way to help my channel out!
I'm a newbie, so forgive my ignorance - Why attach wood strips to the sheet metal & then your walls, etc to the strips? Why not just skip the strips and attach walls directly to the sheet metal?
I just had to pause the video to say god daaamnn i like how u explained everything!!!
Lol! I am going to have to use my little ole jigsaw for this project. Unless lowes would let me use their saw! Haha
Good system of framing. You can also "gang cut" multiple strips of ply. Saves a lot of time. The Kreg pocket screws is a great idea.
Use your brain instead of wallet … good job for small bid on impact drill 👌🏻
You should cut the wood and sell kits or get it perfect and sell plans.
You are a great teacher.
This guy has the best van building videos I’ve seen. It’s surprising all of his videos don’t have this many views. Thank you Ankeney!
So good! Watching you makes it look doable. Thank you for all the tips. Looking forward to watching more of your informative videos.
Excellent framing video. One of the best DIY show and tell demos I've seen. Thanks.
Just about to dive in to my framing process. Perfect! Thanks for the tips and doing the thinking for us.
Think this is one of the most helpful videos!! Really appreciate it and keep up the good work!
Another great video. You made the framing look so great. I have the ceiling and horizontal boards done! Uprights go in tomorrow. I wish I was young, strong, and tall...
Man I cannot tell you helpful this video is along with your wisdom from the previous build really shines bright. Thank you so much man.
I'm starting to build out my ProMaster 2500 and this tutorial was excellent. Thanks so much!
the most instructive and practical van build series yet. thank you!
Very glad I found this video. I was just staring at my walls and wondering what I was going to do for framing. I think I am going to completely replicate your process. I really love the upper 2x6 idea and the way you framer the bed sleep area. Thanks!!!