Hi! Everything you can see in the video was built from scrap. Motors are from printers, and controler was an old scraped controller from KRN d.o.o. company.
Mi jim kažemo "kladivca" kad razgovaramo, ili pa ono što jesu, "elektromagnet"-i. Na engleskom su "solenoid"-i. Kod nas se ih može kupit npr. u Bauhausu u zvoncima za vrata (mora biti 9V, ne 230V verzija), koštaju 12€ po komadu
Hello, i need to ask you something, how you do the electrification of this bells? Cause i have similar bells at home and i want electrificate them same like you soo i wanna ask how i can buy the motors, wheels, controll boxes etc... Regards wrecker :D
Guten Morgen 🌞 Ein sehr schönes Video. Welche Motorsreuerung wird hier verwendet? Könntest du vielleicht davon auch mal ein Video machen? Vielen lieben Dank vorab. Mit freundlichen Grüßen Peter Gärtner
sono contrappesate come se fossero delle campane vere, particolarmente grandi campane personali che sono a slancio e hanno motori veri per campane; straordinario lavoro certosino.
Nope, because with this type of motors rhythm ringing won' t be possible.. Ringing computer cares for pulses... But bells "swing times" are measured precisely and programmed into computer. :-)
I bought them in Žalec. They were cast by a man, which is retired worker from Feniks foundry. Their diameters are cc 30cm - 27 cm - 23cm - 20cm And their weights are 10kg - 5kg - 3kg and 2,5 kg... They cost me around 700€ ;-)
Prav vedno z veseljem pogledam ta video ko ga vidim na youtubu ;) Ko pomislim na to da bojo moji nekoč taki me prav veselega naredi! :D Čeprav so tvoji zdaj zelo drugače postavljeni :)))
@@TheDenix8 Mors pa gledat da ma Dominik jih zdej 5 pa vecja dva sta zdej tezja :)) Sej bo vsak čas mi jih porihtal. Pomoje ce gledas koncni izgled na splosno bojo od dominika pa moji lih tm tm ;)
Bells like this you can order at a bell foundry (Grassmayr, Perner, Bachert, Rincker, Paccard, Eijsbuts, ...) just like the larger church bells. Slovenian equivalent is OMCO Feniks those are most similar to bells in video. The exact same bells as in video are made by Mr. Grobelnik who once worked at OMCO Feniks and makes bells at home.
Tale posnetek me je čisto očaral. Je možno da poveš kaj veš o sami sinhronizaciji zvonov? Vidim da imajo zvonovi protiutež na vrhu. Predvidvam, da je njen namen nastavljanje hitrosti nihanja. Kaj pa je namen uteži ob strani?
Hvala! prvi del sinhronizacije zvonov je narejen z podaljški (če pogledaš os pri velikem in pri malem.. pri malem je sam "jarem" podaljšan (jarem=nosilni del za zvon) tako da imajo zvonovi že sami po sebi enak nihajni čas in enako hitrost. Ker so zvonovi zelo majhni, sem dodal še protiuteži na vrhu, da sem jih s tem upočasnil in spravil na nek "normalen tempo". Za motorje pa poskrbi procesor ki prek relejev daje enakomerne signale, enkrat v eno in drugič v drugo stran. In tudi poskrbi za prave zamike in enakomeren ritem. Stranske uteži pa so imenovane "smerne teži" na zvonovih so zato, da zvon udarja enakomerno na eno in na drugo stran, brez njih bi zvon v eno stran udaril hitreje in močneje, in se zato na nasprotni strani doda tako utež, da se ga spravi na enakomernost. Upam da ti je odgovor koristen, drugače pa kar prašaj :-)
Yes!! you understand correctly what i wrote before. the question wasn't very clearly because my english is very bad!! :) In Slovenia, there are some beatiful bells from max samassa?
Hehe mine is not good eighter ;-) Hm We have a lot of Samassa bells.. Our bell foundry called "strojne tovarne in livarne" was casting in max Samassa "rib"... If I see where a bell from Max Samassa I promise I will record it for you :D
Organista Cadorino Computer gives impulses to motors via relays at specified time intervals, which are set the same as bell swing time and then for each bell shifted (delayed) to get consecutive strikes. Motors are from printers and similar devices.
Organista Cadorino Here it is shrani.si/f/V/T9/32YN92zY/untitled.png (same for each bell with its own two pairs of relays; they are basically for changing direction of current flow so that motor changes direction)
Gspijkenisse Because my bells are dis''' - g''' - ais''' - c'''' ;-) C'' Weights around 250 kg ;-) and these are 10kg - 5kg - 3kg - 2,5kg... And big bell costs around 300€ :-)
@@TradOrganist I also never thought i would get my own bells. i have exact same bells as him in the video :) . when all the work with bells will be done im for sure gonna make a video about it ;)
Tolles Video, wie hast du das gebaut dass die Glocken in der Schnelligkeit wie Kirchenglocken läuten das würde ich mit meinen Glocken auch Gerne machen
With Mixere, you can put some records (only in .mp3 format) of bells, music or womething else and you can put how many traks as you want; then you put in all the truks on Mixere the volume (firts column) to the highest degree and then on the column pitch, you but the indicator in the position where, for you the bell as the sound that you want to listen and that do the same process with all tracks and by that you can create your personal concert of bells on your computer. If you don't want to charged the Samassa bells on RUclips, now I send you my e-mail in privacy.
Zvonovi so uglašeni v dispozicijo Salve Regina in sicer es3 - g3 - b3 - c4. Skupaj so stali nekje okoli 800€. Za ostalo pa nemorem reči ker sem ogromno stvari izdelal sam doma, jih pobral na odpadu, predeloval, ...
***** Smallest bells price is 90€ :-) It isn' t actually cast in foundry, Mr. Grobelnik is a man who casts small bells at home, but in foundry FENIKS same sized bells price is 140€.. All is in Slovenia.
From discarded multi-function machines (photo-copying machines). And yes, the controller is actually a KRN controller for big bells www.krn-sistemi.si/
Wonderful!!! I've find out for the hammers! The bell's clapper "retro-lancé" you did it by yourself? Or you've bought the bells already with it? And, are you the one from arduino's forum?
Thanks!! Nope, I bought clappers in foundry. They were cast with the bells ;-) . And Again Nope ;-) The one from arduino forum is my good friend Denis ;-)
@@vrhovskizvonovi4063 Naslov v več jezikih in pa tematika, ki zanima veliko ljudi - te elektrificirani miniaturni zvončki zanimajo tudi marsikoga v Nemčiji, Italiji, na Hrvaškem, Slovaškem itd. Če pogledate ostale videe, večina nima toliko ogledov, se pa tu pa tam iz nam nepojasnjenih razlogov kakšen video zelo "prime", npr. ne znam pojasniti, zakaj se je moj video iz Krke na Dolenjskem tako zelo bolj prijel, kot ostali. So pa bolj popularni tudi videi z znanimi Božjimi potmi, večjimi in kvalitetnejšimi zvonovi ter kraji, ki jih turisti pogosteje obiščejo. Vendar nabirati oglede ni najin cilj, podokumentirati imava namen vse, kar se bo dalo, ne glede na to, koliko ogledov nama prinese (saj tako ali tako še nisva monetizirala kanalov)
Eines der schönsten RUclips - Profile - weiter so 👍
I've got a ⚫ hand-held 🐄🔔 and a ⚪ hand-held 🐄🔔! Good bells!!!💗👍
That's so sweet :)
I like what you made to make them ring not so fast, hard and loud, great work and nice composition!
Thank you!!!! :-) :-)
I want something like that in my room
AMOGUS
1
@@1998character_guy sussy baka
Where did you buy it from?
It turned out quite beautiful and melodic💗
Kannst du mal den link zu den Motoren schicken? 😊
Hi! Everything you can see in the video was built from scrap. Motors are from printers, and controler was an old scraped controller from KRN d.o.o. company.
What is the name of the hammers for striking amd chiming? In slovenian
Mi jim kažemo "kladivca" kad razgovaramo, ili pa ono što jesu, "elektromagnet"-i. Na engleskom su "solenoid"-i. Kod nas se ih može kupit npr. u Bauhausu u zvoncima za vrata (mora biti 9V, ne 230V verzija), koštaju 12€ po komadu
i love bells from Nemo.Guinto i just have 5 bells with poder
Nice video, spg1211!!! I like it! And i'm glad you like church bells too because I like them too!
Nice rhythm bell!
Beautiful sound.
Hello, i need to ask you something, how you do the electrification of this bells? Cause i have similar bells at home and i want electrificate them same like you soo i wanna ask how i can buy the motors, wheels, controll boxes etc...
Regards wrecker :D
Oh i saw this Video 4 jears ago. Beautiful
Where did you find the bells?
Zvona su ti super.
Guten Morgen 🌞 Ein sehr schönes Video. Welche Motorsreuerung wird hier verwendet? Könntest du vielleicht davon auch mal ein Video machen? Vielen lieben Dank vorab.
Mit freundlichen Grüßen
Peter Gärtner
lepi zvonovi !
Do you still have the flowerpot bells
Nope. Not anymore. I have them stored in my house, but they don' t ring anymore :-)
Hallo! Echt cooles Video!
Von wo sind die Glocken Motoren? Lg
Great! Beautiful synchronisation !
Thanks :-)
sono contrappesate come se fossero delle campane vere, particolarmente grandi campane personali che sono a slancio e hanno motori veri per campane; straordinario lavoro certosino.
I just like it
Can someone anwser me how did you make the electronic hamers on the side of the bells?
Tony Let's play 678 The hammers were taken from doorbells. You must find 12V gong doorbell and take out this hammer.
spg1211 Thank you wery much! :-)
Toll, darf ich fragen wie die Melodien heißen?
Are there any switches in the motors?
Nope, because with this type of motors rhythm ringing won' t be possible.. Ringing computer cares for pulses... But bells "swing times" are measured precisely and programmed into computer. :-)
spg1211 ok thanks. the time must be very precilesy, if it didn't the bell could touch the ceiling
Yes bells swing time must be... and also motor "on-time" But I think it is good for now :D
Where did you buy them, how big are they and what did they cost?
I bought them in Žalec. They were cast by a man, which is retired worker from Feniks foundry. Their diameters are cc 30cm - 27 cm - 23cm - 20cm And their weights are 10kg - 5kg - 3kg and 2,5 kg... They cost me around 700€ ;-)
How did you make those motors rotate half way
h-bridge
Auch Taktläuten kann sehr schön sein... :) Welche Marke ist der Läutecomputer?- Ich habe bei meinen Glocken Mülleruhren verwendet
Danke!! Dies ist KRN Läutecomputer. (KRN ist ein Slowenisch Unternehmen für die Automatisierung von Glocken)
Ottimo lavoro!!
Prav vedno z veseljem pogledam ta video ko ga vidim na youtubu ;) Ko pomislim na to da bojo moji nekoč taki me prav veselega naredi! :D Čeprav so tvoji zdaj zelo drugače postavljeni :)))
Tvoji bodo še malo boljši ;)
@@TheDenix8 Mors pa gledat da ma Dominik jih zdej 5 pa vecja dva sta zdej tezja :)) Sej bo vsak čas mi jih porihtal. Pomoje ce gledas koncni izgled na splosno bojo od dominika pa moji lih tm tm ;)
Where are you from??I can understand almost everything cause I am from Serbia. O iz Slovenije.
very very beautiful. I collect and ring church bells myself. Where can I buy bells like this?
Bells like this you can order at a bell foundry (Grassmayr, Perner, Bachert, Rincker, Paccard, Eijsbuts, ...) just like the larger church bells. Slovenian equivalent is OMCO Feniks those are most similar to bells in video. The exact same bells as in video are made by Mr. Grobelnik who once worked at OMCO Feniks and makes bells at home.
Wer hat denn diese schönen Glocken gegossen🙂
When your clock goes off you get 4 bells ringing at morning.
Kako lepo zvoniju 😍😍 bas mi je všeć poslusat lepo
Very impressive! I like it!
živijo nazadnje sva se pogovarjala o zelenem zvonu ki ima 1300 kg ali bi vedel za kakšnega manjšega hvala!
Absoulut Klasse.
Danke! :-))))
@@spg1211 mit was werden die Motoren angesteuert?
WHICH CHURCH BELLS ARE SOUNDING IN THE BACKGROUND?
Nikos Podas Bells from Šmarna Gora. Watch on the channel of TheDenix8. It is bell play "pritrkavanje"
Wie viel hat alles zusammen gekostet?
+Geometry Fabi Alles über 700 €.
Welche Art von Elektromotoren sind beteiligt?
DC Motoren vom Drucker.
Who cast this bells they are so beautyful in sound!
Former employee of our bell foundry OMCO Fenix (now OMCO Metals) mr. Grobelnik
@@TheDenix8 how much does a 3 Kilo belleith handles coast?
@@campanaro_99 It varies, usually around 150€
@@TheDenix8 Wow! Were could i order one? How much shipping coasts to italy?
Tale posnetek me je čisto očaral. Je možno da poveš kaj veš o sami sinhronizaciji zvonov? Vidim da imajo zvonovi protiutež na vrhu. Predvidvam, da je njen namen nastavljanje hitrosti nihanja. Kaj pa je namen uteži ob strani?
Hvala! prvi del sinhronizacije zvonov je narejen z podaljški (če pogledaš os pri velikem in pri malem.. pri malem je sam "jarem" podaljšan (jarem=nosilni del za zvon) tako da imajo zvonovi že sami po sebi enak nihajni čas in enako hitrost. Ker so zvonovi zelo majhni, sem dodal še protiuteži na vrhu, da sem jih s tem upočasnil in spravil na nek "normalen tempo". Za motorje pa poskrbi procesor ki prek relejev daje enakomerne signale, enkrat v eno in drugič v drugo stran. In tudi poskrbi za prave zamike in enakomeren ritem. Stranske uteži pa so imenovane "smerne teži" na zvonovih so zato, da zvon udarja enakomerno na eno in na drugo stran, brez njih bi zvon v eno stran udaril hitreje in močneje, in se zato na nasprotni strani doda tako utež, da se ga spravi na enakomernost.
Upam da ti je odgovor koristen, drugače pa kar prašaj :-)
Eine Frage wo hast du denn die Motoren gekauft??? 🤔🤔
Ich möchte die auch
@@Letill_34 Taken from old printers and multifunction machines (our school has those). But you can probably find them on ebay too
11:32 satisfiying
Lepo si jih zrihtal. Bravo!
Tole pritrkavanje na začetku mi je pa kar znano :D
Hvala :DD
Jap, dobra stara Šmarna gora :-D
spg1211 ;)
Šmarna ja, never get's old :D
Yes!! you understand correctly what i wrote before. the question wasn't very clearly because my english is very bad!! :) In Slovenia, there are some beatiful bells from max samassa?
Hehe mine is not good eighter ;-)
Hm We have a lot of Samassa bells.. Our bell foundry called "strojne tovarne in livarne" was casting in max Samassa "rib"... If I see where a bell from Max Samassa I promise I will record it for you :D
how did you electrify the bells?
how you synchronized?
Organista Cadorino Computer gives impulses to motors via relays at specified time intervals, which are set the same as bell swing time and then for each bell shifted (delayed) to get consecutive strikes. Motors are from printers and similar devices.
TheDenix8 If I give you my email, can you send me the wiring diagram??;)
Organista Cadorino Here it is shrani.si/f/V/T9/32YN92zY/untitled.png (same for each bell with its own two pairs of relays; they are basically for changing direction of current flow so that motor changes direction)
TheDenix8 but how is a control unit called and where can you get it
What would a C'' Bell cost with Feniks? In Holland it's about 10.000...
I am not sure but I think it is about 6000€... (One bought it and he said it was about 6000€ )
Oke, it's not all that cheap. How could you get that for 600 :o
Gspijkenisse Because my bells are dis''' - g''' - ais''' - c'''' ;-) C'' Weights around 250 kg ;-) and these are 10kg - 5kg - 3kg - 2,5kg... And big bell costs around 300€ :-)
How can it be... So expensive :(
@@TradOrganist I also never thought i would get my own bells. i have exact same bells as him in the video :) . when all the work with bells will be done im for sure gonna make a video about it ;)
Tolles Video, wie hast du das gebaut dass die Glocken in der Schnelligkeit wie Kirchenglocken läuten das würde ich mit meinen Glocken auch Gerne machen
Weights on top of the yoke/headstock to slow the bell down and counterweight clappers
okay thanks for explaining that to me 😊
Woher hast du diese glocken?
What are the bells at the beginning of the video?
These are the bells from Šmarna Gora: ruclips.net/video/0oFixtI0Idw/видео.html
@@spg1211 thanks😉
With Mixere, you can put some records (only in .mp3 format) of bells, music or womething else and you can put how many traks as you want; then you put in all the truks on Mixere the volume (firts column) to the highest degree and then on the column pitch, you but the indicator in the position where, for you the bell as the sound that you want to listen and that do the same process with all tracks and by that you can create your personal concert of bells on your computer. If you don't want to charged the Samassa bells on RUclips, now I send you my e-mail in privacy.
Thank you for explanation :D I just sent you two sounds :D
kako so po vrsti uglaseni (od najmanjšega pa do največjega) pa koliko je vse skupaj stalo (denar).
Zvonovi so uglašeni v dispozicijo Salve Regina in sicer es3 - g3 - b3 - c4. Skupaj so stali nekje okoli 800€. Za ostalo pa nemorem reči ker sem ogromno stvari izdelal sam doma, jih pobral na odpadu, predeloval, ...
Wow! That is great!
Hello!! The bells that you hear at the beginning, from which place are?
BellRinger Deveà Here :) 4d.rtvslo.si/!arhiv/kulturni-vrhovi/89943418 at time 21:48
The bells at the beginning are the bells of Šmarna Gora
Hvala! kje si kupil zvonomat
Zvonomata pa nisem kupil ampak sem ga dobil od firme ki se ukvarja s tem. ( z njo sodelujem)
Wo kommen die Glocken her
Pozdravljeni,
zanima me koliko ste plačali za 5kg zvon?
Hvala,lp
Pozdravljen! 5kg zvon stane cc 200€ LP
A samo... jaz imam 14 kg teskega in poje ton E. Pa je bil 700€
❤️❤️❤️❤️❤️❤️❤️❤️😍😍😍😍😍😍😍😍😍😍😍
Wie sind die Motoren programmiert?
Die Computer (weise scahtel an der Wand) gibt den Elektromotoren die Impulsen fur das elektromotor zu pullen und zu liesen in beide Wege.
spg1211
Was hat die ganze Glockenanlage gekostet?
Ich habe es kostenlos :-))
Was???
Dominik Sülzle
Ja, das war kostenlos :-)))
I built a bell tower at my home but it's only for German standard ringing.
nicht german, slovenisch
Odlično 😊
Nice! What is the weight of the biggest bell?
Thank you! It' s 10kg. :-))
spg1211 10 kg? Wow, that's quite light in weight for a g´´´...... Is it cast in a ´lightweight profile´? (Leichte rippe)
glockenkanale Actually it' s es' ' ' (dis' ' ')... But I think that it' s cast in "leichte rippe" too...
spg1211 Oops, i mean dis´´´. :-) But i think all your bells are cast in 'leichte rippe' , because the ais´´´ weights only 2.5 kg....
glockenkanale Yes they are.. These are molds of Fenix bell foundry that casts mostly in "leichte rippe"
Gdje ste to kupili
Nice song you got there
Ottimo video Complimenti!! Mi potresti dire dove hai trovato gli elettrobattenti delle campane? Grazie!
Tutto è fatto da spazzatura. Ponte mentre la società KRN. (traduzione google mi dispiace) ^^
non c'è problema Grazie molte!!
Wie sind die Motoren eingestellt?
das frag ich mich auch
There are relays in the ringing machine, controlled by microcontroller.
Woher hast du die Läuteanlage?
www.krn-sistemi.at/
Danke!
They ring with patterns, much like bells of an Orthodox Church.
Where did you get them
He bought them from former bell foundry worker Mr. Grobelnik who makes bells at home.
TheDenix8 can you send a link to that website
TheDenix8 do you have a number or something to contact him
It is cool
Wie viel kostet eigentlich eine b''' und g'''?
Die b''' kostet 120 euros und die g''' kostet 170 euros :-))
spg1211 f'''?
glockenkanale Traurig! Ich reparierte ;-)))))
spg1211 What? I bet you mean: Hoppla! Ich habe es ändert. (Translation: Oops! I've changed it.) ;-))
Yes that' s it, but Google translate is really baad >.
By who you do the bells?
If I understood correctly, By Mr. Grobelnik, who worked in Feniks:
www.feniks-omco.si/izdelki/seznam/zvonovi-iz-brona
Wow! Vonderful bells! Nice work!
Thank you, Dominik!! :D :D
sounds cool and it has a beat
sounds like a sick drum beat
Hallo Woher hast du die Glocke 🔔🔔🔔
Wow, great bells :) It's expensive for me ;)
Thank you! It was or me too but I could earn enough money to buy them ;-)))
spg1211 How much it cost you the smallest bell? In what foundry melted it?
***** Smallest bells price is 90€ :-) It isn' t actually cast in foundry, Mr. Grobelnik is a man who casts small bells at home, but in foundry FENIKS same sized bells price is 140€.. All is in Slovenia.
In Poland, the foundry take ~ 16 Euro per kilogram bronze ... and ~ 200 Euro per crown
Smaller bells are more expensive ...
@@spg1211 And how much costed other bells
Echt toll
Pozdrav. Imam pitanje. Gdje se mogu nabaviti mala zvona poput ovih koji su na vašem videu?
Živijo! Lahko jih nabavite pri gospodu Grobelniku (če vas zanima mi pošljite privat sporočilo pa vam dam kontakt) ali v Žalcu v tovarni OMCO Feniks.
Puno hvala na vašem odgovoru . Ako se ne varam radi se o Sloveniji ? Možete mi postali kontakt na mail: ante.jez@gmail.com
WOW, einfach genial! Da hast du dir echt große Mühe gegeben!
;-)
Danke! Nicht viel, weil das nur aus meinem Freude war ;-))))
Wow! It's beautiful! Compliments!!
Thank you :D :D
bello
Where do you get those motors from? The controller is from a different system, right?
From discarded multi-function machines (photo-copying machines). And yes, the controller is actually a KRN controller for big bells www.krn-sistemi.si/
Wonderful!!! I've find out for the hammers! The bell's clapper "retro-lancé" you did it by yourself? Or you've bought the bells already with it?
And, are you the one from arduino's forum?
Thanks!! Nope, I bought clappers in foundry. They were cast with the bells ;-) . And Again Nope ;-) The one from arduino forum is my good friend Denis ;-)
Thanks!!! ;-)
@@spg1211 kak se zove taj forum, ak znaš?
Welche motoren sind das?
Von Printer, 12V DC. Nicht Schrittmotor aber normal Motor.
homemade alarm clock in my mind
Koliko približno pa stane 1 takšen zvon?
Zelo je odvisno od velikosti. Najmanjši je okoli 130€ največji pa malo manj kot 1000€.
Hvala. Tudi jaz sem včeraj začel snemati zvonove, pa me zanima kako si ti prišel do toliko ogledov.
@@vrhovskizvonovi4063 Naslov v več jezikih in pa tematika, ki zanima veliko ljudi - te elektrificirani miniaturni zvončki zanimajo tudi marsikoga v Nemčiji, Italiji, na Hrvaškem, Slovaškem itd. Če pogledate ostale videe, večina nima toliko ogledov, se pa tu pa tam iz nam nepojasnjenih razlogov kakšen video zelo "prime", npr. ne znam pojasniti, zakaj se je moj video iz Krke na Dolenjskem tako zelo bolj prijel, kot ostali. So pa bolj popularni tudi videi z znanimi Božjimi potmi, večjimi in kvalitetnejšimi zvonovi ter kraji, ki jih turisti pogosteje obiščejo. Vendar nabirati oglede ni najin cilj, podokumentirati imava namen vse, kar se bo dalo, ne glede na to, koliko ogledov nama prinese (saj tako ali tako še nisva monetizirala kanalov)
@@TheDenix8 Hvala za odgovor :)
@@TheDenix8 Kdaj pa tudi pridita kaj na Vrh Svetih Treh Kraljev imamo super zvonove ;).
Sta bila že blizu naprimer v Smrečju in v Rovtah.
Excelente!
Super!
Perner Passau?
@@FabianEmch mr Grobelnik from Ferait žalec
The start sounds like the bells of the Kathedral de Ógatœïhjkásé.
Kako si to uradio to je nešto naj teže
I want this in my bedroom
Very beautiful.
Thankss!!!
te lahko nekaj prosim :)
Seveda. Kar povej. :-)
@@spg1211 ce bi lahko v kranju in žužemberku posnel zvonove :D
@@LovroMilek Žužemberk sva ravno nedavno posnela in bo prišel na vrsto kmalu, tudi Kranj bo posnet ob prvi priliki ;)
@@TheDenix8 hvala lepa :)
Großartig!
Danke, Orgelix ;-)))
Was sind das für Schlaghämmer?
So was hätte ich auch gerne.
Mechanismus der Türklingel. :-))
www.priporocam.si/pic_resizer_large.php?pic=36282035801559688.jpg
Ok wo kann man die kaufen und was kosten die?
Dominik Sülzle
Im Handel mit elektrogeräten, kostet ca. 20 € :-)))
Ok :)
Einfach genial!
Echt super!!!
Danke Schon!!!
génial