Should I replace My Kitchen Split-Circuit Receptacles With GFCIs?
HTML-код
- Опубликовано: 28 авг 2023
- Two issues I typically see regarding split-circuit kitchen receptacles are:
1. Why does my breaker trip when I replace the receptacle?
2. Should I replace the receptacle with ground fault circuit protection (GFCI) devices?
In this video I take a deep into the mechanics of the split-circuit kitchen receptacle, and review the merit (and challenges) of replacing them with GFCIs to provide ground fault protection.
I expose the most common mistake made when replacing these devices and how to rectify it. I also demonstrate the steps to switching the split-circuit receptacle out to GFCIs, and ask the question of whether there is a need to do so.
Kitchen Split Circuit Receptacles Explained: • Kitchen Split Circuit ...
Brunt Workwear: bruntworkwear.com/
Use the code: INTERNETELECTRICIAN to receive $10 off your first order!
Thanks for watching! I'm Terry Peterman, the Internet Electrician, and welcome to my channel. On this channel I teach DIYers how to safely and competently work on simple electrical projects around the home. I will teach you how to do it right, do it safely, and save money by doing it yourself.
Check Out My Social Media:
Website - www.electrical-online.com/
RUclips - / terrypeterman
Facebook - / internetelectrician
Sign up for my FREE monthly newsletter filled with tips on home wiring, tools and more: www.electrical-online.com 
Хобби
I have a split receptacle next to my kitchen sink, one with a switch for garbage disposal and the other is an outlet. This video helped my wrap my mind around what is going on. Thanks Terry!
This video was EXACTLY what I was looking for! It couldn't be more bang on, I was struggling to find an answer to this very specific situation. Thank you!!
Thanks, Terry. Excellent explanation on this topic. I appreciate you sharing your expertise 👏🏻
Thanks for watching!
Great Video, Terry. I'm extending a multi-wire branch circuit for a work-surface adjacent to the kitchen area. One phase actually splits off and becomes a dedicated circuit for the washer/dryer and the other phase serves the kitchen countertop for small appliances. It's a little goofy, I thought, but I didn't wire it.
Excellent, we'll thought through video. Gave me all the answers I needed in one place. Thanks so much!
Very thorough and helpful video. Thank you!
Now if only this RUclips video could help me get over my perfectly rational fear of electricity.
Golden rule! Turn off the power to the circuit! But I do know many people that feel the same way, and that's OK. That's when we leave it to the professionals.
Great videos Terry!
My question is what is proper way of adding a dishwasher to a split circuit outlet.
Thank you Very much
Hello, I have the red black white on a regular receptacle by the sink. Recently I put in a double gang box and tapped into the receptacle for single switch and pot light over sink all good.
Now to switch out receptacle to GFCI, do I use red and black and white somehow?
Thanks
Hi there Terry Peterman! Do you have to replace a GFCI in a kitchen every few years or is it fine to just leave them be as long as you know they are working? For example some Home owners never replace there kitchen GFCI wall outlets from day 1 to a lifetime and seem some owners have had good luck with zero problems. Or in some cases what about home owners that hardly ever use there GFCI kitchen outlets?
Good video.
Thank-you! Happy New Year!
My electrician ran a 12/2 (20 Amps) wire from breaker box to kitchen with 20 Amp breaker (GFCI) and did a split circuit on same receptacle using 14/3 wire to power dishwasher (10 amps) and food disposer (7.5 amps). Is this OK?
I possibly misunderstood things, but would the GFCI wiring you showed still apply if I have two 20-amp breakers (dishwasher [always on] and garbage disposal [on switch]) hooked to a split outlet under the sink? Your examples seem to be going outlet to outlet. But mine is (I believe) breaker to outlet under the sink and I guess another breaker to a switch to that same under the sink outlet. I'm guessing I'm going to have to go the GFCI breaker route since I don't feel like dealing with cutting holes in the cabinet under the sink to add another outlet and/or do some fancy wiring with how it is currently.
Going back to my video, I must ask you why? Why do you want to change this? This is how many kitchens are wired to accommodate the dishwasher and garbage disposal and all passed inspection at the time of installation and are grandfathered in so there is no requirement to change anything here. But if you would feel better with GFCI (and now the breaker would probably be GFCI/AFCI combo), you could replace the breaker as this would be the easiest solution.
@@theinternetelectrician Costco is apparently requiring it for installation (if they do it, I guess). I'm trying to see if I can get out of it for grandfather purposes and also because they didn't require it last time four years ago. But perhaps something changed in my state. Either way, I doubt it's something I can get out of and it's probably for the best in the long run. Just annoying.
@@lepke1979 then changing the breaker will be best, but I’d confirm with them why and what they will accept. Is this a garbage disposal or a new dishwasher they are installing?
@@theinternetelectrician Just a dishwasher. Can do the install myself, but it's included with the delivery. But now it's just become more of a headache than being nice.
My garage was turned into a room with bathroom and kitchenette and Landry room. Non of these rooms had GFCI (and not GFCI Breakers.) I ended up changing 5 outlets into GFCI.. Its been fine for 35 years, but I feel safer especially using my hair trimmer and hair drier with GFCI. Any outlet that I have ever used near water, I changed to GFCI.
Well Done.
My question for my kitchen split plug 15 A, normal 2 pole breaker. I see a new product that has 1 GFCI on the bottom and a switch on the top. (Leviton) With the 14/3 wire coming into the box, can i use the black live to power the GFCI and the red live to power the switch ( for say a pot light above the sink) ? So basically instead of capping off the red wire, I am using it to power a switch.
Good question! News to me about the new device from Leviton! I just had a look at the device and no, it uses the incoming hot to the device, and you can protect other outlets downstream on the load side, and the switched output terminal comes from the same source and is also on the load side of the protection so the light fixture or any device that you chose to have switched is also GFCI protected so you can only utilize one of the hot wires, cap off the other.
Thank you for clarifying.
I have the same question too. I purchased Leviton GFSW1-KW and according to the instructions, the switch can be wired non GFCI protected. So can the wires coming off the switch be wired directly to the garbage disposal?
@@theinternetelectrician Terry, can you clarify wiring instructions for Leviton GFSW1-KW? The instructions say you can wire the switch without GFCI protection. So you have two black wires exiting the back of receptacle. Can you wire those direct to line and load for garbage disposal? I have another hot coming into the box for the outlet portion that I wanted to wire to the GFCI. Otherwise, I may have to trim tile to open cutout for a 2 gang box so I can wire a separate switch and 2 outlet GFCI.
Terry, in one word, describe what happens when you hook up the new outlet and forget to remove the jumper? lol You got to it, I was too early,, your probably right, the breaker would refuse to connect. Too bad, I like fireworks.
In one word? It rhymes with truck, but starts with an 'F' 🙂. But it's usually quite unspectacular. The breaker just fights back and clicks off immediately. Sometimes you do see sparks however!
Not enough. lol. I want spectacular fireworks...I know jump out the circuit breaker. lol And if your real good at it, you might take out the transformer outside your house. They make really good fireworks shows.@@theinternetelectrician
I couldn’t understand why there was a red wire in there.
Will the gfci still be splits?
good question and has not been answere
Honestly, if I went with replacing those split receptacles with GFCI ones, I'd still use the red wire so that the MWBC circuit will still have both phases utilized. Like the first outlet would use the black hot, the second one would use the red hot, and continue alternating like that.
Not saying your method is wrong. It's actually simple, but I would be willing to go the extra mile by capping the red wire in the panel and replacing the two pole with a single pole breaker. That way, there's no more shared neutral and live red wire, allowing only one GFCI receptacle to protect downstream ones. This is assuming the circuit is only supplying power to the kitchen of course.