This vid is the reality of sailing.. Thanks a lot. I do appreciate this. Rarher than other bloggers dont show this. Only calm seas. Guyz.. Ur so awesome!!!
Hello, is it to much wind for a code 2 (or 0)... Nice boat. Gonna have one in the future, I hope (From Portugal). Best regards and waiting for new videos
José Andrade, thanks. RIght now, the boat only has a code 0, the self-tacking jib and the main. An asymmetrical spinnaker is on the way soon though. For the most part, we were running typically 30-45 degrees of apparent wind and 50-65 true wind, as our destination was almost directly upwind. I'm still waiting for the official word from the dealer/sailmaker but I think the code 0 would be used in less than 15 knots at these angles, but could have worked at slightly higher angles at these wind speeds and a code 2 would be for even higher angles. At around 7-9 knots boat speed for most of the trip, we were fairly happy with the speed as we weren't in a rush or racing. By the time the wind died down to ideal code 0 range, we were almost there anyways.
wow - all the comments are like drs looking at a knee operation. Whats with the under cabin water close-up? Look here we are tacking - same apparent - no instructions - need to re-title video
Sorry to ask as new to sailing but the humming seemed to pretty loud in the cabin area is that due to the mast positioning. As out of all the videos I've watched on this boat and the 450s its the first time I've heard it.
Andrew Crawford thanks for asking! I am not sure the exact source of the noise. My best guess is it is from the wind on the mast at the high upwind angles when the wind speed is up. It could be interaction of the wind with other parts of the rigging as well. The engines were off and there is no generator and it wasn't from an electrical system. The noise was not there when heading more downwind and was not there when the wind speed was lower. It might be the wind getting to a slot in the mast. Maybe someone else on the web can help figure it out.
Water Dragon thank you for your reply it has helped we do appreciate it I will be at the LGM Boat show in a few weeks time and I will ask one of the Lagoon. reps and let you know of there response.
Hi OK back from the show if you hear the noise again go round and check your rigging by holding on to it if the humming stops then that stay needs adjustment quick fix attach rubber bungee cord between the rigging as this should eliminate the noise. If you can't find any problem with the rigging contact your broker as it might be an issue with the mast nothing serious so no worries. Hope this helps also looks like we will be purchasing ours in the next couple of months so appreciate any feed back on what you would have purchased or not purchased from lagoon. Good Luck.
Andrew Crawford thank you! I figure it is probably some part of the rigging looser than it should be. Happy with the boat so far. Ask me in 10 years and I will have a better answer of course but so far so good.
@@waterdragon4944 I know it's been a year now . My wife and I are purchasing a 42 delivery march 2020 was the encloser factory made or after market?? I was told to buy after market as it would be of better quality. Yours looked very nice . I was wondering where you had this done ???
My Lagoon 400S2 sailed those waters for 3 years before heading off around the world. We left from French Creek Marina, June 2016. My RUclips channel is “ Off the Starboard Hull” Currently in Puerto Vallarta, Mexico getting ready to cross to the Marquesses in a few weeks. You will love the Lagoon. Cheers Scott
Hi Scott I am a huge fan of your channel. It was one of my inspirations for doing this. I always tell Scott M. Well, I did a RUclips video. I'm no Scott D. but I did my best!
Being able to hear the wind and water around the boat is so important. I really finally had the experience of sailing.
This vid is the reality of sailing.. Thanks a lot. I do appreciate this. Rarher than other bloggers dont show this. Only calm seas. Guyz.. Ur so awesome!!!
Been a sailor for three years. Can confirm you are right!
just discovered your channel, very nice video Capt., thanks. ☕☕🍩🍩. Happy ⛵. ;-), lovely Cata boat you got there, Capt.!
Ted Jelke thank you for the kind words!
Water Dragon ,,, ahh, you're so very welcome my friend again, happy ⛵! ☕☕🍩🍩
Dragon fly
Iam on the marked for being a lagoon 42 soon. Selling my house for a liveaboard retiredment. Any thoughts or advice ?
Nice vid but please tell me that the whining noise inside close hauled wasn’t the rigging humming? Or was it?
I’d really love to know please. Thanks
Awesome channel going watch all your episodes
Great cat sailing video, ty
I noticed that same hum on another Lagoon 45, "Lagoon Hum"
not the engines then?
nope, apparently not after seeing the meters.
So you are cery close to the apparent wind. But real windangle looks around 35°
Hello, is it to much wind for a code 2 (or 0)... Nice boat. Gonna have one in the future, I hope (From Portugal). Best regards and waiting for new videos
José Andrade, thanks. RIght now, the boat only has a code 0, the self-tacking jib and the main. An asymmetrical spinnaker is on the way soon though. For the most part, we were running typically 30-45 degrees of apparent wind and 50-65 true wind, as our destination was almost directly upwind. I'm still waiting for the official word from the dealer/sailmaker but I think the code 0 would be used in less than 15 knots at these angles, but could have worked at slightly higher angles at these wind speeds and a code 2 would be for even higher angles. At around 7-9 knots boat speed for most of the trip, we were fairly happy with the speed as we weren't in a rush or racing. By the time the wind died down to ideal code 0 range, we were almost there anyways.
Good morning. Thanks for your atenttion. Best regards and again ... it´s a very nice, stable, confortable, secure and easy to sail.
wow - all the comments are like drs looking at a knee operation. Whats with the under cabin water close-up? Look here we are tacking - same apparent - no instructions - need to re-title video
Sorry to ask as new to sailing but the humming seemed to pretty loud in the cabin area is that due to the mast positioning. As out of all the videos I've watched on this boat and the 450s its the first time I've heard it.
Andrew Crawford thanks for asking! I am not sure the exact source of the noise. My best guess is it is from the wind on the mast at the high upwind angles when the wind speed is up. It could be interaction of the wind with other parts of the rigging as well. The engines were off and there is no generator and it wasn't from an electrical system. The noise was not there when heading more downwind and was not there when the wind speed was lower. It might be the wind getting to a slot in the mast. Maybe someone else on the web can help figure it out.
Water Dragon thank you for your reply it has helped we do appreciate it I will be at the LGM Boat show in a few weeks time and I will ask one of the Lagoon. reps and let you know of there response.
Hi OK back from the show if you hear the noise again go round and check your rigging by holding on to it if the humming stops then that stay needs adjustment quick fix attach rubber bungee cord between the rigging as this should eliminate the noise. If you can't find any problem with the rigging contact your broker as it might be an issue with the mast nothing serious so no worries. Hope this helps also looks like we will be purchasing ours in the next couple of months so appreciate any feed back on what you would have purchased or not purchased from lagoon. Good Luck.
Andrew Crawford thank you! I figure it is probably some part of the rigging looser than it should be. Happy with the boat so far. Ask me in 10 years and I will have a better answer of course but so far so good.
@@waterdragon4944 I know it's been a year now . My wife and I are purchasing a 42 delivery march 2020 was the encloser factory made or after market?? I was told to buy after market as it would be of better quality. Yours looked very nice . I was wondering where you had this done ???
were all happy for you - nice luffing!
My Lagoon 400S2 sailed those waters for 3 years before heading off around the world.
We left from French Creek Marina, June 2016.
My RUclips channel is “ Off the Starboard Hull”
Currently in Puerto Vallarta, Mexico getting ready to cross to the Marquesses in a few weeks.
You will love the Lagoon.
Cheers Scott
I lived in Nanaimo for 4 months on the dock in the municipal marina.
Hi Scott I am a huge fan of your channel. It was one of my inspirations for doing this. I always tell Scott M. Well, I did a RUclips video. I'm no Scott D. but I did my best!
Niiiice !! 😊⛵️⚓️🚣✨🥂✨