How to Change Hypoid Gear or Final Drive Oil on a 1985 Honda 1100C Shadow Motorcycle
HTML-код
- Опубликовано: 7 сен 2024
- Visit www.thesmalleng...
*Always follow the instructions in your repair manual when doing repair or maintenance work on a motorcycle. Manuals can be found at the dealer and online.*
In this video I show how to replace the oil in the final drive on a 1985 Honda Shadow 1100C. The process is similar on other bikes, so this video should be helpful if your motorcycle is something other than a Honda Shadow. Honda recommends using SAE 80 Hypoid Gear oil that is API GL-5 rated.
Thanks for Watching!
Thanks for your share ,,,
Torque:
Drain bolt (9 FT/LBS) ,,,,and filler cap (14 FT/LBS)
its 2020, this helped me 8 years later. Thank you
Really helpful when switching from a chain drive bike to shaft driven one. Thanks
Nice job on the easy going informative video. Used this tutorial to change the hypoid gear oil on my 1983 V45 Magna. Appreciate.
+Gary Dore Thanks for Watching!
Great video. Clear, concise, and to the point. Thanks for sharing!
Thanks for posting this. I've got an 87 vt700. Gonna be changing the differential fluid real soon!
thank you..............excellent straight forward video plus the clarity of the camera was nice very good Sir!
I am just about to do this on my VT 1100T. Great video. Thanks.
Jay Damhar Thanks for watching!
great job going to do it on 98 honda Valkyarie this week, thanks
+leslie hendry Thanks for watching!
Seems easy enough... Gonna change the fluid on my 1984 Nighthawk 700 tomorrow...
Great vid thanks, a regular oil change video would be awesome :)
There seems to be confusion about the proper fill volume. My '03 VT1100C2 has no center stand. The service manual clearly says, "Place the motorcycle on its side stand on a level surface." (page 3-14). I recently drained my hypoid gear, and collected about seven and a half ounces of old fluid. We shall see what it takes to fill it back up.
please do a clutch replacement video on the same bike
Torque for both drain plug and cap is 12Nm
Whats the silver cap on top the whole drive
Hi. This was a very informative videoI have an 84 GL 1200, would this help me if I can't shift my bike into neutral? Thank you in advance for your help.
Hi could you help me to get the cap cause´in the shop they broke the part where the o ring goes thank you
It took 20 minutes to drain the oil??
It’s a heavy weight gear oil, Od expect it to come out much slower than motor oil. I’d ride the bike to warm it up first to get it all to drain out better.
this helped out alot thank you
Thanks. Love my bike but let me ask you....does the tone of the engine m ake you tired or agitated at certain rpms or long rides. I guess I must have a tiny hex hole..I have to fine..i was wondering how I would suck oil up through my only apparent hole on my nighthawk.
Shawn Defeudis I honestly have never ridden this bike on a long ride. Not sure I understand your last question, but they make small hand pumps with small hose accessories that can be used to remove oil from cavities like a differential. You can find them at most auto parts stores.
torque specs are 9 and 14. ft/lb ....14 is the filler big bolt
nice work
Good one, thanks.
+lilevil 1955 Thanks for watching!
What’s the cap on top of the final drive?
Breather
is there a secondary gear oil change for the shifter? is so could you explain how to add the gear oil to it. Thank you
That's your transmission and it shares oil with the engine.
What kind of camera you use to record this video, Very nice zoom! thank you for vid.
mine is a Honda shadow VT 500
torque specs = 12 Nm