@@AirsoftAlfonse oh! I do believe it! I've seen you with the mp7 and I'm sure u used it as a GBBR befor comiting heresy and changing it to HPA :P But even when we share the absolute dissapoinment for the MK46 Mod.0 and for many GBBR platforms, I will die on the TM MWS hill! It's have it's flaws, like any other GBBR, but paired with a nice optic, it's deadly accurate and I'm sure you would enjoy it a lot
Lol “good effort on the cardio!” …. “That’s not 90… it’s 45…” lol too funny. Also the beginning few minutes were sooo good. And sooo accurate about GBBRs
@@VenomShadows305 the angle he was accused of shooting at it seems like they didn’t allow shooting at a 90 degree angle downwards it had to be 45. Just watch the video again to see :)
You have to admit though, when you open up on the guys in the stairwell just after 2:55, the GBBR looks so fricken cool! That there makes it all seem worthwhile if it felt half as cool as it looked, you must’ve had a good day mates! 😮😊
tbh i thought this was going to be VFC oem when they offered me one like all of the other 416s, unfortunately it is actually a kwa oem hense why it broke
A couple of bits I noticed in the video 1 Storing your mags feed lip end up, you could be getting dirt in them which maybe why your getting jams 2 if you're only getting half a mag they may need purging, fill them, then turn them feed lip end up, press the release valve quickly a couple of times, rinse and repeat until you see gas when you hit the release valve If you want reliable GBBR go TM I've never had an issue with my MP7 and MWS Little tip to get the joules up on a MWS all the barrels are 250mm to keep it under 1j, I put a 275mm one in mine it took it up to 1.2j I imagine going 300mm would probably put it around 1.4j
370mm and some springs in the nozzle got my mws to 1.7j with .28 and over 2j with .4's with nuprol green. Buffer detonated itself after a few hundred shots though lol Almost stock TM CQBR with nimrod blue to stay under 1j worked fine for.. 3-4k shots I think? ...after which the buffer detonated itself :D luckily after market buffers are both cheap and available almost everywhere. No other noteworthy problems so far after more than 3 years.
3:47 man how much better would the game be if everyone was as fair and noble as yourself and the other gentleman in this battle to the death! 😊 what a champ
I feel i have to defend the GBBR's here. As an ex-infantryman i feel that AEG's are a complete joke. I played a game with a TM Scar H, and some other thing, but when you press the trigger it's like pressing a keyboard button, no feedback. No creep/break/reset ect. at all and very little overall gun feedback, it freaked me out lol. I own a VFC MP7 gen 2, a VFC HK416A5 gen 2 and a GHK AK-105 (Zenitco Alpha build), those are really really fun, and look fantastic! Spraying is not an option, you have to be a lot more tactical, but that's a big plus for me! As for accuracy, i upgraded the 416 with T-N.T. complete kit, shoots like a charm now. The MP7 shoots 50 meters (55 yards) extremely accurate (I couldn't measure beyond this range) right out of the box. BUT, it aint cheap. The 416 doesn't feel like a real 5.56, but its pretty close. So my advice, man up and get a decent GBBR (VFC, TM or GHK). With love, a GBBR snob 😁
Vfc used to suck quite bad, but they’re getting really damn solid lately. I have both a marui mtr (tacticool mws) and a vfc BCM, and although they focus on two completely different main goals (TM performance, VFC realism) i must admit I wouldn’t be able to pick a winner. Same deal for their mp7. Viper, on the other hand, is just on a whole different level
I’m better cause I run a ghk as my main. Way more simpler, and more reliabler. Of the few issues I had most were because of my incompetence,(forgetting to install hammer pin retaining washer.) the only one that wasn’t was a failure to fed at a high vertical angle, so also my fault kind of. Other than that it’s great, and accuracy by volume is never an issue for a 3 hour game with 7 mag combat load out( just don’t suppress, and line up sights.
I love Gas Blow Backs for the immersion! It makes the replica go from feeling like a toy to a firearm. Do I wish they were more consistent and less finicky? ABSOLUTELY! Also, kinda sounds like Mario64 music there in the beginning...
@@pagansquaddie my first and only GBBR is WE haha, so maybe that's my problem. nearly got a GHK except waited a year and still no stock, so jumped on a WE on a 33% off sale.
Where ya goin' with that foggy mountain breakdown mask you got goin' on there partner, thing's got more mist than Evian. Tip : if you don't wanna spend on anti-fog sprays, spit on the glass, rub around a bit, wait for 5 mins and rinse with water. Great channel by the way !
That full auto malfunction is because you managed to double feed and get a bb lodged into the lower reciever in such a way that the hammer wasn't capable of locking.
Unfortunately that’s not what happened, the trigger assembly broke, I too originally thought that was what happened, but after taking it fully apart I was not able to to fix it and had to swap it for a new lower receiver
Alfonse I love your videos been watching you for over 3 years. You make your videos very fun and funny to watch your style is somthing id edit with if I was to play airsoft one day. Also that demonstration of how the gun does is perfect 😂. Great job. I thought also a Wii sports edits like strike and hole in one, out of park, chip in would also be great edits. Personally Wii sports Strike is one my favorite memes. And also I love Eggmans annoucment meme. Thanks for the great content and have a amazing day and night.
its crazy how far gbbs havecome in the last 2 years. With how good the vfc's v3s are and the mws, I would take mws or vfc v3 over an aeg and hpa any day of the week
I’ve loved the idea of gas guns for 20 years, but I’ve had nothing but trouble with them. Leaking, jamming, repeated shots losing power due to freezing mags.
I use a WE 416 and aside from a few problems I’ve been having a blast with it. Hopup is surprisingly good on WE guns. But yeah, gas guns do have a lot of problems you have to prepare for lol
@@AirsoftAlfonse Nice! Yeah I’m surprised at how well mine’s held up, I’ve dry fired and shot the crap out of it, and I’ve only had a valve knocker and nozzle spring failure. Rest of the gun’s still kickin’. I have a VFC Avalon Calibur rail on mine
my hkm27 does the same thing for the trigger . its like the safety switch to the semi and only full auto works , i think its cause of the switch . mine is loose . also mine is aeg
I HIGHLY suggest a Modify bucking for any VFC GBBR. It greatly improves it. A barrel upgrade isn’t even needed. Use .4g BBs and it will be very consistent and is basically a laser. Any Modify bucking will work…except the green one made for their Mod 24 sniper rifle. The entrance is too tight for the nozzles and they don’t seat far enough forward.
yeah to be totally honest when they offered me one i thought it was a vfc oem like the aegs so i was super excited, when i found out it was kwa i was slightly disappointed and basically knew what to expect as it is basically jsut a nice looking lm4
When you were in the water with the gun, at first I was like: OH MY GOSH. WHAT THE HECK IS HE DOING. And then I calmed down after it worked a little bit afterwards. But it sounds like it can be a problem gun at times
Had both a vfc and KWA platform gbbrs nothing but problems. On the other hand my several stock WeTech ones were very good and consistent. Sometimes simple is better
Hey, Alfonse you are my favorite youtuber and your loadout inspired me, would you let me do a similar one? Not the same but I wan’t like a marine loadout too
If you coat your mask with a thin layer of toothpaste or shampoo (or spit!) and dunk it once in the water before puting it on, that would help with the fogging. Nice video
Cannot shoot below 45 degrees angle downward from the perspective of the shooter, extremely difficult to determine actual angle, sounds good in theory but it reality too arbitrary
I've looked at getting a GBBR for a bit but bringing it to big events and having it fail because it doesn't feel like working scares me. Which is why I decided to stick with the TM NGRS Scar H. However, if I can luck out on finding one I would love to own a Hephaestus (Project T) Tavor-21. That's my unicorn.
Just got the Kwa 416 Had the trigger issue as well it was a broken bb got stuck behind the switch locking it to full auto. Do you have the updated version with the hop up? I found it only jammed if I tried to put more bbs in the mag the loading stick allowed.
My VFC GBBR has malfunctioned more than all of my LM4s, A TNT hop and not overloading the mags stop most all double feeds and other feeding issues in my experience
When using a gbb you should probably think about upgrading it. Plus i personally think KWA version of the 416 might not be the best. Try the VFC 416A5 and please. Do not put them underwater. But again it's just mi thought. Sincerly a GBB player
I agree, I thought it was the VFC oem when they asked me if I wanted one (like the AEG versions) I completely agree, before I made my RUclips channel I used to be a gbb only player, I would upgrade all of my internals, nozzle lengthened piston head, stronger return springs ect, also I took it in the water only after I played with it for 4 weekends of play and realized it was meh internally
Mario (Kart) 64 musics used and you already get a like from me! =D But in all fairness, this GBB is known for having alot of feeding issues and 'blowouts'. Because I am looking to buy one, but I have heard and seen alot of dislike for it on forums and youtube. So would you recommend this rifle or not? Maybe with some upgraded internals?
I love GBB, but its definitely an acquired taste, they are really fun to use, in my opinion it comes down to what your goals are while playing airsoft, if you like the realistic trigger feeling, low cap mags and the simulated recoil they its for you! airsoft can mean different things for different people which is what makes it awesome! it depends on a lot of factors but generally speaking you will be outmatched in terms of fire power compared to what most other players are using like aegs or hpa but if you dont care then defintly go for it!
Its a KWA so it was expected to be a pos lol. You think paying that much for gbbrs, they could at least make their parts out of decent materials and not pot metal for trigger assemblies.
i love Alfonse's editing, its either the most intense, last stand gameplay, or some goofy Quandale Dingle tier music playing as he just zaps folks
hey guys,
@@undersc0r it's Quandale Dingle here
@@MadGBBRREEEHEHEHEHEHE
I understand that GBBR's are not for a noobie, but they are probably the coolest platform in airsoft... and you know, nothing like a TM MWS!!! :D
belive it or not before i started youtube i was a GBB only main back in the day
@@AirsoftAlfonse oh! I do believe it! I've seen you with the mp7 and I'm sure u used it as a GBBR befor comiting heresy and changing it to HPA :P
But even when we share the absolute dissapoinment for the MK46 Mod.0 and for many GBBR platforms, I will die on the TM MWS hill! It's have it's flaws, like any other GBBR, but paired with a nice optic, it's deadly accurate and I'm sure you would enjoy it a lot
Would gbb pistols be better than ggbr?
@@Killer_Sloth gbb pistols are 100% more reliable than gbbr
@@smokedem333 okay thanks I have been going to an indoor field and might soon get my own gear
"yea i'm pretty milsim" xD
Love your content huge fan, keep it up
Lol “good effort on the cardio!” …. “That’s not 90… it’s 45…” lol too funny. Also the beginning few minutes were sooo good. And sooo accurate about GBBRs
What is the 90/45 referring to?
@@VenomShadows305 the angle he was accused of shooting at it seems like they didn’t allow shooting at a 90 degree angle downwards it had to be 45. Just watch the video again to see :)
You have to admit though, when you open up on the guys in the stairwell just after 2:55, the GBBR looks so fricken cool! That there makes it all seem worthwhile if it felt half as cool as it looked, you must’ve had a good day mates! 😮😊
Altough I prefer VFC's version, this is a long awaited video for me. Time to grab some coffee and watch another epic gameplay from Alfonse.
I agree, love mine vfc hk416a5
tbh i thought this was going to be VFC oem when they offered me one like all of the other 416s, unfortunately it is actually a kwa oem hense why it broke
I've been waiting for a new one. Awesome content man keep up the good work.
A couple of bits I noticed in the video
1 Storing your mags feed lip end up, you could be getting dirt in them which maybe why your getting jams
2 if you're only getting half a mag they may need purging, fill them, then turn them feed lip end up, press the release valve quickly a couple of times, rinse and repeat until you see gas when you hit the release valve
If you want reliable GBBR go TM I've never had an issue with my MP7 and MWS
Little tip to get the joules up on a MWS all the barrels are 250mm to keep it under 1j, I put a 275mm one in mine it took it up to 1.2j
I imagine going 300mm would probably put it around 1.4j
370mm and some springs in the nozzle got my mws to 1.7j with .28 and over 2j with .4's with nuprol green. Buffer detonated itself after a few hundred shots though lol
Almost stock TM CQBR with nimrod blue to stay under 1j worked fine for.. 3-4k shots I think? ...after which the buffer detonated itself :D luckily after market buffers are both cheap and available almost everywhere.
No other noteworthy problems so far after more than 3 years.
Mws supremacy
What is TM?
@@larkincampbell5409 Tokyo marui
@@larkincampbell5409 Tokyo marui
3:47 man how much better would the game be if everyone was as fair and noble as yourself and the other gentleman in this battle to the death! 😊 what a champ
Finally HK416 gbbr, been waiting years for this!
Why, the real thing is a gas piston lol
I already started smiling and laughing at the intro of the video 😂 keep up the good work 👍 my dude 😎
I feel i have to defend the GBBR's here. As an ex-infantryman i feel that AEG's are a complete joke. I played a game with a TM Scar H, and some other thing, but when you press the trigger it's like pressing a keyboard button, no feedback. No creep/break/reset ect. at all and very little overall gun feedback, it freaked me out lol. I own a VFC MP7 gen 2, a VFC HK416A5 gen 2 and a GHK AK-105 (Zenitco Alpha build), those are really really fun, and look fantastic! Spraying is not an option, you have to be a lot more tactical, but that's a big plus for me! As for accuracy, i upgraded the 416 with T-N.T. complete kit, shoots like a charm now. The MP7 shoots 50 meters (55 yards) extremely accurate (I couldn't measure beyond this range) right out of the box. BUT, it aint cheap. The 416 doesn't feel like a real 5.56, but its pretty close. So my advice, man up and get a decent GBBR (VFC, TM or GHK). With love, a GBBR snob 😁
Alfonso 3:46 nice speed soft, welcome in family 🤣
best starter gbb is marui, no other replica can match it, over. Other companies might feel so real, but at the end they work semi good
Eh vfc and vipertech are on par with the mws.
Really just comes down to personal preference
Vfc used to suck quite bad, but they’re getting really damn solid lately. I have both a marui mtr (tacticool mws) and a vfc BCM, and although they focus on two completely different main goals (TM performance, VFC realism) i must admit I wouldn’t be able to pick a winner. Same deal for their mp7. Viper, on the other hand, is just on a whole different level
@@nicoladessi8101 in a good way or bad way?
I’m better cause I run a ghk as my main. Way more simpler, and more reliabler. Of the few issues I had most were because of my incompetence,(forgetting to install hammer pin retaining washer.) the only one that wasn’t was a failure to fed at a high vertical angle, so also my fault kind of. Other than that it’s great, and accuracy by volume is never an issue for a 3 hour game with 7 mag combat load out( just don’t suppress, and line up sights.
I love Gas Blow Backs for the immersion! It makes the replica go from feeling like a toy to a firearm. Do I wish they were more consistent and less finicky? ABSOLUTELY!
Also, kinda sounds like Mario64 music there in the beginning...
It was peach's castle music.
It was from mario kart in the begining. Snow type races have this.
They can be more consistent straight out the box. Mines always banged 300 FPS with .28's. Just make sure it has GHK on the right and not UMAREX or WE
@@pagansquaddie my first and only GBBR is WE haha, so maybe that's my problem.
nearly got a GHK except waited a year and still no stock, so jumped on a WE on a 33% off sale.
The 416 is a piston gas system. There is no gas blowback 😂
I can't take this channel seriously 😂😭😂👌🏽
Where ya goin' with that foggy mountain breakdown mask you got goin' on there partner, thing's got more mist than Evian. Tip : if you don't wanna spend on anti-fog sprays, spit on the glass, rub around a bit, wait for 5 mins and rinse with water. Great channel by the way !
5:30 is literally me in every cqb engagement haha
Literally every time lol
awesome intro
greets from germany ;)
this is some dank shit, I love it.. keep em coming!
That full auto malfunction is because you managed to double feed and get a bb lodged into the lower reciever in such a way that the hammer wasn't capable of locking.
Unfortunately that’s not what happened, the trigger assembly broke, I too originally thought that was what happened, but after taking it fully apart I was not able to to fix it and had to swap it for a new lower receiver
@@AirsoftAlfonse or that XD, yikes. It wasn't old was it?
It looks like a kwa one they’re trash
I love the CBS SEC Game of the Week music!
Lmaoo the Wii music 😂😂
5:57 when master chief sees a marine with a better gun than his
Love the memes and jokes, once again!
5:39 i know this is an old vid but its so cool to see you playing at my field, Augusta airsoft lol. Hopefully ill catch you on the field sometime
Heck yeah back to the snorkel and wetsuit. Nostalgic.
Alfonse I love your videos been watching you for over 3 years. You make your videos very fun and funny to watch your style is somthing id edit with if I was to play airsoft one day. Also that demonstration of how the gun does is perfect 😂. Great job. I thought also a Wii sports edits like strike and hole in one, out of park, chip in would also be great edits. Personally Wii sports Strike is one my favorite memes. And also I love Eggmans annoucment meme. Thanks for the great content and have a amazing day and night.
thank you for watching and taking the time to write a comment! I appreciate you! Wii Sports themes live in my head rent free every single day hahah
@@AirsoftAlfonse Thats amazing and thanks for responding back appreciate it. Yeah I always will love Wii Sports, very nice indeed.
that mario kart music is so nostalgic
Sick gameplay bro
Is this site new I’ve seen so many newer videos from different content creators with this site also love the start with you just sat in the pool XD
nice to see a gbbr in use
OMG 😲 took the Airsoft gun into the water! Too harsh for the Airsoft gun. Applause for your passion~ HAHAHA
7:00 that's agusta airsoft, that where I usually go
its crazy how far gbbs havecome in the last 2 years. With how good the vfc's v3s are and the mws, I would take mws or vfc v3 over an aeg and hpa
any day of the week
Nice video airsoft Alfoense
I’ve loved the idea of gas guns for 20 years, but I’ve had nothing but trouble with them. Leaking, jamming, repeated shots losing power due to freezing mags.
same
Man it's simple just store the CO2 cartridges in your balls like I do. Keeps em nice and warm 😘
I use a WE 416 and aside from a few problems I’ve been having a blast with it. Hopup is surprisingly good on WE guns. But yeah, gas guns do have a lot of problems you have to prepare for lol
I also have a we 416 that i have had since 2012 and it still works! i used to always use gbbs before i started making youtube vidoes!
@@AirsoftAlfonse Nice! Yeah I’m surprised at how well mine’s held up, I’ve dry fired and shot the crap out of it, and I’ve only had a valve knocker and nozzle spring failure. Rest of the gun’s still kickin’. I have a VFC Avalon Calibur rail on mine
@@WolfMan-nf4lv i'm here just tp say i got my we m4 around the time this video was uploaded, been an awesome rifle so far, no issues at all.
Haha, i feel the super mario (kart) vibes.
Im not sure if you have any but i would love some deep full video reviews on guns
you should try vfc 416 i got one and it runs like a dream even in the cold of northern norway
my hkm27 does the same thing for the trigger . its like the safety switch to the semi and only full auto works , i think its cause of the switch . mine is loose . also mine is aeg
That is gonna be one moldy plate carrier 😂
I HIGHLY suggest a Modify bucking for any VFC GBBR. It greatly improves it. A barrel upgrade isn’t even needed. Use .4g BBs and it will be very consistent and is basically a laser. Any Modify bucking will work…except the green one made for their Mod 24 sniper rifle. The entrance is too tight for the nozzles and they don’t seat far enough forward.
EDIT: just saw that it’s a KWA. Yeah…that’s a different beast. I don’t care much for their GBBRs. TNT is a good upgrade option.
yeah to be totally honest when they offered me one i thought it was a vfc oem like the aegs so i was super excited, when i found out it was kwa i was slightly disappointed and basically knew what to expect as it is basically jsut a nice looking lm4
@@AirsoftAlfonse I think you would’ve had a much better time with a VFC
In my experience most of the consistency issues that come with gbbs can be fixed by using Co2 or HPA instead of propane.
aor2 maritime jpc...wealthy airsoft gear, nice setup
When you were in the water with the gun, at first I was like: OH MY GOSH. WHAT THE HECK IS HE DOING. And then I calmed down after it worked a little bit afterwards. But it sounds like it can be a problem gun at times
MOAR AIRSOFT SCIENCE!
It will be done my lord.
I just got into airsoft used to paintball my first gun is the we scar L ggb and my side arm is jw3 2011
Now that is very epic.
Is that koopa troopa beach music playing in the background
I love the design of the gun and I am really trying to find the best hk416
Is it possible if you tell me where to buy it?
Nice video, is your rear lens of the sight broken?
shooting angle as a rule is probably some of the most goof ball shit. "wahhhhh someone had good positioning"
Good job 👍
Wow, mine has never failed me. Sorry to hear that yours did.
what are the best types of airsoft weapons (I didnt even know these existed)? Sorry newbie here!
Awesome field
Problem is you went with the kwa oem version my dude
Had both a vfc and KWA platform gbbrs nothing but problems. On the other hand my several stock WeTech ones were very good and consistent. Sometimes simple is better
GHK is the king of gbbrs
I believe in WE tech supremacy 🤝
@@MP-cq8pc you mean king in garbage qc and designs
@Test ①④⓪②③⑦⓪⑨⑦⑤③ nice scam bot
Airsoft- i went like this and then I went like this-awesome 😂
What surpressor is that ?
I realy like how litlle it shows of the barrel
I want one for my 416 now
This place is 4 hours from me, need to come play here!
It's been some time since your last airsoft gameplay where you wore your wetsuit
Hey, Alfonse you are my favorite youtuber and your loadout inspired me, would you let me do a similar one? Not the same but I wan’t like a marine loadout too
they should be able to make a decent aeg that can fire underwater seeing is how alot of rc crawlers etc are able to be fully submerged
Honestly crazy
If you coat your mask with a thin layer of toothpaste or shampoo (or spit!) and dunk it once in the water before puting it on, that would help with the fogging. Nice video
Do a airsoft shoot under water with no blowback but with spring or not ?
I have very similar scope is that specterdr by elcan?
What does “45” mean in this context? No clue here.. barrel lenght? Orr.. bb weights?
Cannot shoot below 45 degrees angle downward from the perspective of the shooter, extremely difficult to determine actual angle, sounds good in theory but it reality too arbitrary
@@AirsoftAlfonse so you can't shoot straight down is the idea?
@@AirsoftAlfonse What a weird rule, could never have guessed this, hahaha
Little change of pace from the usual accuracy by volume with the LMG
If you want a gbbr that works just buy a TM :')
VFC make good externals, feels like a real gun but the internals are not the best
Is there an adapter that I'd have to use to mount a mock can to have it be the cqb version
1:27 another happy landing
DOGGO❤
I've looked at getting a GBBR for a bit but bringing it to big events and having it fail because it doesn't feel like working scares me. Which is why I decided to stick with the TM NGRS Scar H.
However, if I can luck out on finding one I would love to own a Hephaestus (Project T) Tavor-21. That's my unicorn.
What’s the name of the Mario instrument you using 😂📝
Just got the Kwa 416 Had the trigger issue as well it was a broken bb got stuck behind the switch locking it to full auto. Do you have the updated version with the hop up? I found it only jammed if I tried to put more bbs in the mag the loading stick allowed.
Try this again with red gas, it works better the water is too cold for the mags,
"I bought a KWA"
"I have consistency and reliability issues"
Cause and effect buddy, not all GBBR's are created equal XD
@Chevalier KWA suffers the most when it comes to m4 gbbr jamming GHK is the best when it comes to the gbbr m4
My VFC GBBR has malfunctioned more than all of my LM4s, A TNT hop and not overloading the mags stop most all double feeds and other feeding issues in my experience
@@stimsfps1510 What VFC? My G3, MP5 and MP7 are all fine but some models have a really bad reputation
@@Hobbnob_FirstPersonAirsoft The BCM MCMR Rifle, No Fatal errors with the gun but it jams frequently, KWA Has a bad rep for not many prevalent issues
@@Hobbnob_FirstPersonAirsoft and im talking M4 Platform GBBRs, I have also owned a VFC MP5 that never had issues.
“Great cardio effort”
Is this WE HK416? pls answer.
no this is kwa
I have the WE 416C with a adapter and it doesn't have issues unless i spam full auto.
I have a we as well, its worked for over 9 years
@@AirsoftAlfonse sheeesshhhhhh
When using a gbb you should probably think about upgrading it. Plus i personally think KWA version of the 416 might not be the best. Try the VFC 416A5 and please. Do not put them underwater. But again it's just mi thought. Sincerly a GBB player
I agree, I thought it was the VFC oem when they asked me if I wanted one (like the AEG versions) I completely agree, before I made my RUclips channel I used to be a gbb only player, I would upgrade all of my internals, nozzle lengthened piston head, stronger return springs ect, also I took it in the water only after I played with it for 4 weekends of play and realized it was meh internally
Alright so i hope to see the 416a5 or a nice bcm/knights armaments gameplay on the channel soon. Good job with your videos they are always interesting
What would you say is better Co2/Gas or AEG?
That stairs with no railings looks like a big safety concern, just saying. I’m not even joking.
GBB! 🔥
Remember no full auto in the pool Alfonse
Yah, I sold my gbb, it's rare for me to get out to play so it's not worth it to try and baby something that doesn't want to work half the time.
Como se llama la arena de airsoft en la que grabas tus videos solo por curiosidad
I hope you will show more gbb gameplay :D
This really mad me buy this
try vipertech, gas blowbacks without the gas blowback issues.
Go for a VFC HK416 a5 soo reliable and sweet 😅🙃
Mario (Kart) 64 musics used and you already get a like from me! =D
But in all fairness, this GBB is known for having alot of feeding issues and 'blowouts'.
Because I am looking to buy one, but I have heard and seen alot of dislike for it on forums and youtube.
So would you recommend this rifle or not? Maybe with some upgraded internals?
I love GBB, but its definitely an acquired taste, they are really fun to use, in my opinion it comes down to what your goals are while playing airsoft, if you like the realistic trigger feeling, low cap mags and the simulated recoil they its for you! airsoft can mean different things for different people which is what makes it awesome! it depends on a lot of factors but generally speaking you will be outmatched in terms of fire power compared to what most other players are using like aegs or hpa but if you dont care then defintly go for it!
So the malfunction and mr alfonse are QUITE related....mmm intersiting
Its a KWA so it was expected to be a pos lol. You think paying that much for gbbrs, they could at least make their parts out of decent materials and not pot metal for trigger assemblies.
What is the weight of your bullet ? And the gas pressure ?
Nahh my guy git be playin on ravod 911