Hello! I would recommend making sure to clean out the cannister and clean/change the filters if they are blocked. I would also recommend trying the vacuum without the hose attached to see if there is suction at the machine in case you have a blockage in the hose or tubes. This is where we would recommend to start.
Hi where do the crevice head and dust collector head go? is there a slot on the vacuum body where it sticks to? I know some Japanese brands which can store on the body - thanks in advance!
I use the size 1 and 1/0 Mustad hooks to freeline for snook ruclips.net/user/postUgkxzXmlErSqVAEGWFEKO530BvTqFDw53QW3 and they have been fantastic. The points are super sharp, and the hook is small enough to blend with my baitfish, yet large enough to land fish 30" or more. I also use these hooks when I'm pier or surf fishing with my kids. They tend to catch tons of smaller snapper, whiting, and catfish, and we get far fewer gut hooks with these Mustad in-lines, which means more of them survive after release. I was actually using these hooks when I caught my friend too, but I think that had more to do with the bait I was using ;-)
Hello, Once the filter is fitted you want to put the cap on with the white line, lined up with the unlocked padlock. You then push in the cap and twist it to the locked padlock to secure it in place. You can see these images clearly on the wheel at 2:03 of the video.
get the WD series for that, it has a blower too. The VC is rather lightweight compared to WD series. The WD has wet & dry modes too, so you can just wet the floor and suck it all up.
@@pasatiempok2685 also might look at the WD1 home, or WD2 ke atas. Since the WD1 only 2 heads - the standard head and crevice. So not so good for cleaning car cus no brush head for example.
Hello, I am not finding that exact information but it does state that the operating radius is 7.5m (25ft) which would include the hose a floor tool. So a rough idea would be 18ft for the cord length.
Hi Noora, It is possible that something is stuck. Make sure there is nothing blocking where the debris enters the canister. You can also take off the hose and see if you have good suction power directly at the machine. If you do not hear the sound, it is possible you have a blockage somewhere from your hose to your floor tool.
let me help. This seem to be a problem when the hepa filter is too full of dust-causing overheating (there is no air leaving the filter). Might wanna change to a new one or shake off the dust in a safe environment so you can use it back.
Hello! This machine is a corded machine so you would plug it into a mains power supply. Once you have it plugged in and hit the on button it will continue to work. It is a residential grade machine so if you are looking for a machine for professional use, we do have other options.
@@equip4you488 thank you for your reply. I am looking for bagless canister vacuum cleaner for home purpose. but everywhere i read the reviews i see ppl saying that vacuum cleaners stops working within 5 minutes. and then totally stopped working after few months itself. I am in utter confusion as to which one I should go for. And where can i buy this in Delhi
@@KimchiAndChips1 The Karcher VC 3 is a great vacuum cleaner and we have never had any problems like what you have mentioned. Normally if a vacuum cuts out its because the filter is clogged and over heats the machine. We are located in Barbados so no help to you but if you go onto the karcher dealer search and select your country you can find your local dealers. The models numbers maybe different as there are different voltages and units for different countries but Karcher is a very high quality brand. here is the link for the dealer search: www.kaercher.com/int/support/dealer-search.html?country=bb
@@equip4you488 we have the same brand of vaccum.but suddenly last time when i plug it,the sound changed and it smell.may i know what the caused of it?what is the problem.thank you.
One of the leading brands. Kärcher is one of the brands you can buy without think twice #germanengineering
Hi my suction hose is broken from the vaccume connector
it got stuck i tried to pull it apart and now it wont fit back on
My vacuum cleaner hasn't got any strength, what can I do to improve it?
Hello! I would recommend making sure to clean out the cannister and clean/change the filters if they are blocked.
I would also recommend trying the vacuum without the hose attached to see if there is suction at the machine in case you have a blockage in the hose or tubes.
This is where we would recommend to start.
Hi where do the crevice head and dust collector head go? is there a slot on the vacuum body where it sticks to? I know some Japanese brands which can store on the body - thanks in advance!
I use the size 1 and 1/0 Mustad hooks to freeline for snook ruclips.net/user/postUgkxzXmlErSqVAEGWFEKO530BvTqFDw53QW3 and they have been fantastic. The points are super sharp, and the hook is small enough to blend with my baitfish, yet large enough to land fish 30" or more. I also use these hooks when I'm pier or surf fishing with my kids. They tend to catch tons of smaller snapper, whiting, and catfish, and we get far fewer gut hooks with these Mustad in-lines, which means more of them survive after release. I was actually using these hooks when I caught my friend too, but I think that had more to do with the bait I was using ;-)
The hepa filter and it’s cover keeps popping out when I use the vaccume - please help!
Hello,
Once the filter is fitted you want to put the cap on with the white line, lined up with the unlocked padlock. You then push in the cap and twist it to the locked padlock to secure it in place. You can see these images clearly on the wheel at 2:03 of the video.
Short video contain all the information
Great
Am i able to use this for vacuuming renovation dust? Will it spoil the motor easily?
get the WD series for that, it has a blower too. The VC is rather lightweight compared to WD series. The WD has wet & dry modes too, so you can just wet the floor and suck it all up.
@@sfgdragoon cool thanks for the recommendations 🙂
@@pasatiempok2685 also might look at the WD1 home, or WD2 ke atas. Since the WD1 only 2 heads - the standard head and crevice. So not so good for cleaning car cus no brush head for example.
Hello how long is the cord length?
Hello,
I am not finding that exact information but it does state that the operating radius is 7.5m (25ft) which would include the hose a floor tool. So a rough idea would be 18ft for the cord length.
@@equip4you488 Thank you!
My machine make sound as if something stuck inside ,I didn’t get any blocking article inside what could be the cause?
Hi Noora, It is possible that something is stuck. Make sure there is nothing blocking where the debris enters the canister. You can also take off the hose and see if you have good suction power directly at the machine. If you do not hear the sound, it is possible you have a blockage somewhere from your hose to your floor tool.
Its not starting up..what can be the cause??? 4 year old
let me help. This seem to be a problem when the hepa filter is too full of dust-causing overheating (there is no air leaving the filter). Might wanna change to a new one or shake off the dust in a safe environment so you can use it back.
cok guzel bayildim
I live in an RV and this would be perfect if it just did wet spills also.
how many minutes does it work continously?
Hello! This machine is a corded machine so you would plug it into a mains power supply. Once you have it plugged in and hit the on button it will continue to work.
It is a residential grade machine so if you are looking for a machine for professional use, we do have other options.
@@equip4you488 thank you for your reply. I am looking for bagless canister vacuum cleaner for home purpose. but everywhere i read the reviews i see ppl saying that vacuum cleaners stops working within 5 minutes. and then totally stopped working after few months itself. I am in utter confusion as to which one I should go for. And where can i buy this in Delhi
@@KimchiAndChips1 The Karcher VC 3 is a great vacuum cleaner and we have never had any problems like what you have mentioned. Normally if a vacuum cuts out its because the filter is clogged and over heats the machine. We are located in Barbados so no help to you but if you go onto the karcher dealer search and select your country you can find your local dealers. The models numbers maybe different as there are different voltages and units for different countries but Karcher is a very high quality brand. here is the link for the dealer search: www.kaercher.com/int/support/dealer-search.html?country=bb
@@equip4you488 Thank you!
@@equip4you488 we have the same brand of vaccum.but suddenly last time when i plug it,the sound changed and it smell.may i know what the caused of it?what is the problem.thank you.
한국에서 입주청소 하는 사람입니다 이것은 정말 좋아요
Super 👍
.
Tha best