Knife Making - Tiny Claw
HTML-код
- Опубликовано: 22 дек 2017
- Handmade tiny knife from piece of high carbon steel that left from previous projects, with leather sheath. There I try to explain all steps involved in video of making this knife.
----------------------------------------------------------------------------------------------
If you like video - 'Knife Making - Tiny Claw'
• Knife Making - Tiny Claw
Subscribe on my channel ▶▶▶ goo.gl/ygQB8w
----------------------------------------------------------------------------------------------
/ koss_workshop
/ kossworkshop
----------------------------------------------------------------------------------------------
Music by Epidemic Sound (www.epidemicsound.com) - Хобби
cool little fighting knife and the sheath finishes it off beautifully ...nice work
I like the little boot you made to store it, came out good
This is probably the best knife to start with if you're a beginner with this stuff it's probably how I'm going to start
A cool and unusual design for a knife, beautifully executed.
Простенько, и со вкусом 😊👍. Класс!
Awesome design! Reminds me of Mike Elmer’s Viper neck knifes but I’d way prefer one of these!
That is awesome, great work!
Hello from FRANCE !
SUPERBE TRAVAIL ,
MERCI et merci RUclips .
regis hollet -marchal tellement content de voir un(e) autre français ici
Je suis apprentissage comment parle francais. Est mon francais bien?
@@jay-nx8nr oui ton francais tres bien
Nice work with attention to detail. Have to say the blade was a neat tool. Preferred the scabbard in the unstained state.
Thats a neat and nicely built knife...love it .....
Merry christmas, Koss! Very odd but very cool knife at the same time!
Looks cute
Great work
I prefer your videos without music. I am even a metalhead
Cool project!
I am amazed by your angle grinding skill. Great job!
Luke Hobbs you should see Fiereek Wienga (spelling) look up witcher 3 sword on youtube
Freek Wieringa
Amazing!
Caraca que belo trabalho 😍
Beatiful Word from.Colombia I lite to.much
Like there corrector is crazy
I from Colombia i Like your vidios
incredibly therapeutic, beautiful karambit/kiradashi
Hehe thanks for not calling it one or the other. I’ve been telling people on here that it’s a hybrid between them.
Valhalla Rabbiter i thought it was pretty clear what it was ; )
Anthony Head Me too but apparently people aren’t as knowledgable as us 😂
Awesome
Pretty dam sweet
Show!!! I like...
Super knife
nice😻
Amazing....
Great design. But the sheath work seals the deal.
nice
What kind of glue do you use for templates?
i thought the music was some audioslave i hadnt heard before. good stuff:}
Not Tellin Did you identify the name of the band? Pretty impossible to find it on the website.
Dude I thought the same thing!
If anyone knows the band do tell I need more of it.
I think this is it.
player.epidemicsound.com/search/tracks/?search_query=Shame
Very audioslave / ratm sound track. Like it
Amigo en el minuto del 3:15 cuando estabas haciendo el agujero era q lo pases con broca y no te ubiras gastado todo ese tiempo de limar
What is the material in which the knife is placed to become its color?
Y did u paint the inside of the sheath?
And btw great vid
Good job
Don’t know if it’s just me but I don’t like the music I prefer the audio of you working on it I like the scraps and cutting and stuff idk why I guess I’m just weird but cool knife non the less
Karanbit style, nice
Im gunna make one
안녕하세요.
칼 소름 무서워요. 😱😱👍
BOOOOOOOOOOOOOOOOOOOOOOOOM
👍
Beautiful claw man ❤️ you are great...
God damn it I can't find the carbon steel where can you buy it
What store sell carbon steel bar
What is the paint you use inside the sheath 7:00
do you sell it?
Is it for sale?
Template?
Thanks.
❤❤
I want this knife is this for sale???
do you sell your knife???
i would like to buy yours because my brother love knife i would like to gift him one that why.
Dont mistake me if what i asked hurted you
Where do you get leather like that? Also, what's the solution in the plastic bottle?
my guess would be some form of acid, such as vinegar. it puts a patina on the metal which helps prevent rust
Its the liqiud fore making guns bluish. Tetragun liqiud Blue is a name fore one producer
Why don't you make your own website where you can sell handmade knives???
красивое и законченное ненужно 😊
Высший класс!!! Подскажите в чем Вы черните металл?
Будешь удивлён. Можно в обычной коле. Попробуй сам. Кока кола.
По времени смотри, контролируй. У меня японец был, из плохой стали. Пошла ржавчина. Так посоветовали. Ржу убрало, и сталь пртемнела. Держал часов 12. Но лучше контролируй.
Omggg 😍
What is it you rubbed on the blade, and then dunked in for the coating?
Tim Taylor he rubbed it with sanding paper and dipped it in acid
Ferric chloride i think
massa
Me gustó la navaja pero la funda sta muy tosca y se ve mal!!!!
No tempering?..anyway it looks good nice work
Doesn’t need it because he isn’t going to be chopping anything with it. It’s a cutting knife so only hardening is needed to keep the edge for longer and prevent scratches.
Valhalla Rabbiter I don't think so if he drops it accidentally it might break like glass I recommend to let it temper for 2 hours at 150 degrees Celsius to get the glass hard go away it is still very hard after that. Depending on the material he uses
XJ9 Well yeah it’s always good to temper but I’m just saying that he doesn’t need to. It’s a lightweight little knife and it is steel after all so it probably wouldn’t smash. Oh and thanks for telling me how much to temper it for in a oven because I didn’t know :) I only temper with a blowtorch.
Top 10 reasons they wont let me back in the nursing homes
You can give the paint? pls
cool, but how to use it?
Piotrek Trojan r u stupid?? ITS A FKN POCKET KNIFE WHY DO WE USE KNIVES DUDE TELL ME IDK
MITSOS ASSASSIN how would you use it to cut is what he means, how would you even hold it
the ring is too small, hart to use.
Hi, 5:25 ¿??? Tks!!
Were can you get the metal for the knifes?
Ben Lee scrap yards ? ...old machinery, or buy it from a iron mangers , metal is metal it's what you make off it , it isn't only for one item to be made , when your just trying it out , cheapest place is looking around , you'll be surprised what's lying around , don't worry about the Rust as its only on the surface , a quick grind & it's great underneath , good luck
Can I also buy them from hardware stores like Lowes or Home Depot?
Kaleb Dias Not really. High carbon is the best yeah but you can make very decent knives from any type of steel and iron. At least I have anyway.
What kind of acid did you dip the blade in?
Asger Grosser ferric chloride i think
Tetragun liqiud Blue is one brand og the stuff.
BGMが五月蝿い!
Hello koos the knife is u our design ???
smol karambit
Sort of a hybrid between a kiridashi and a karambit though.
How to make a karambit
Technically a hybrid between a karambit and a kiridashi to be honest.
no, is how to make a small karambit and sorry for my inglish is so bad
Для чего такой нож нужен?
I’ve tried many times making blades I either screw em up bad or can’t get an edge on em to save my life
What's the Title of the Song and the Name of the Band from 0:30 - to 4:00?
Same I was wondering that myself
Alterbridge is the band
Matt Thorgood Which song by alter bridge? I couldn't seem to find it in their songs.
The tunes!!!
Pleaz send me one
First song name?
The sheath looks kinda like an ugg boot
Is it possible to buy your tiny claw?
I want something like this but i couldnt find it xd
i think this looks similar: www.wish.com/search/mini%20claw/product/5a71dd405194c904e4217023?&source=search
Using those torches what did that do
First heat was to normalise the steal. Second heat was to quench and heat treat the steal to make it harder so it can hold a sharp edge.
Josh Hardy gotcha thanks man
👍😎☕🔪
You do know that you're allowed to have more than one belt for your belt sander, right? ;)
song? the first song btw
you should name it ¨Talon¨
This is a tribute to my cat boots 😔
S
Good video once i turned the sound off..
Never water quench
Canola or motor oil works great
We always used hydraulic and gearbox oil.
Мм...йес!
Блин... При формировании болгаркой столько железа улетает просто в мусор!.. Чем плох лобзик?
Болгаркой быстрее, да и лобзика может у него тогда не было. А вообще у него заготовка не большая, если уж экономить металл, то надо было отковывать
Nice Gut Cutter! But, stupid looking sheath. Get some Kydex.
На ботиночек похож)
Sasha Petryschenko Это коготь, тигра )!
Velial Luciferovich чуваки, вы можете мне объяснить? Чем он делает воронение? Куда он его окунает?
Shit. I need a bigger angle grinder.
Ouch I can’t help noticing that at 4:26 you quenched with water. Seriously try not to do that because it can shatter knives. Definitely should use oil but if you HAVE to use water then at least slightly warm it up first.
It really depends of the steel you are using. He's using high carbon steel so you are probably right but you can also make a decent blade with other types of steel. The idea is not to make the blade too hard. If your steel doesn't harden that well you might have to use water to get it hard enough. Also for example some spring steels which make great knives are supposed to be hardened in water.
Actually, quenching with water is quite risky, but oil is usually better for tempering the blade, not for hardening. What I'm most concerned about is that you would have to wield it in 1 individual finger which creates huge risk for broken fingers. Also, for newbies that don't know how the karambit works might get hurt by holding it in the wrong direction. (Accidental self-stabbing.) (I'm a victim of one.)
I love it when people make this comment to guys who obviously know exactly what they are doing :)
Jake Makes right
Pro tips
Охуенно )
*inhales* WEAR GLOVES!
jeremy hooijer you dont wear gloves with spinning objects they can get caught in the tool and pull you hand into it
turtleman cockatoo true, but when you're working with a grinder and stuff its better to wear gloves
Gay's knife.
Show me something that you've made?
no this one good for students
for school because its too small
👍