IBM T43 take apart, disassemble, how to open disassembly
HTML-код
- Опубликовано: 5 фев 2025
- Hi!
No music. No talking. Just work.
If you are taking your IBM T43 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology
Thanks for going through it - easier than reading the manual to open and close the thing... cheers!
Hello, sorry for such a late response, if you still have a problem with removing this part (I am actually not really getting witch one) anyway, let me know at what exact time I am removing it.
(will try to answer faster if you still have this question)
i need to get the yellow part where the power adapter goes in, not sure how to find it..do you know what i should look for?
Thank you in advance for any help provide...and the video is great...thank you
Hi,
you should look for DC jack IBM T43
You are welcome!
this video help me a lot thanks
This question you need to ask prior to take it apart. If you already took it apart - it is kinda to late.
I would say you need to remember where all screws coming from. Where all cables are coming from and how they were placed... Otherwise it will be difficult.
complete and quick disassembling. anybody can find his part he/she needs.
Thank you Jelle Woudstra !
Somewhere by heatsink... closer to CPU, but it is not removable (soldered/glued to motherboard.)
Can you please tell me how to remove the hook piece that holds the top end on, please?
hey would i have to take most of the computer apart just to replace that part?
that HDD is so hard to take out, I still can't get it out of the laptop. If I apply more force I think the cover/caddy will break
any tut on how to reassemble?
Just wearing an anti-static wrist strap doesn't work unless you have it grounded. Don't see where you plugged in a ground strap to the button on the bottom of the wrist strap.
You are right, I should do this slower, at least I know it was fine finally :)
Thanks!!!
Thx I'll try.
You need a harddrive caddy and screwdriver, this is it.
Which part is the graphics card?
Great!!!
now, it will take you more time in re-assembling that machine because all your screws are mixed-up...but thanks anyway...nobody showed this...nice work...
my ibm t43 starting ok. two for secend letar. heng wht im doyenig hlp me pls?
+Alkozai Khan it can be anything. Most likely motherboard issue, but without looking at it, probably no body can tel. Sorry.
I hope you will do it right!!!
seria bueno que explicaras las partes
the translator I use, does not translate it well ... sorry.
thank you, got it hope that works :-)
I need a identification of screws/locations please. you need send-me?
Hi, I don't think it is possible....
Make printscreen of the moment in this video, point on that part in a Paint save, upload, show me and I will tell you
I think so, because dc jack is screwed to this inner part, stupid design :(
Where is the hard drive
get used to do like that :)
+regazz