1.75" Titanium vs 50 Cals Baddest rounds. (surprise at the end)
HTML-код
- Опубликовано: 30 май 2020
- Headphone warning, for loud impact sounds
Sackin Metals sent us this awesome piece of 1.75" piece of titanium to try 50 cals baddest rounds on. The results were very cool. You need to watch to the end of the video for the surprise.
Check out Sackin Metals at; www.6AL4V.Shop you won't be disappointed. You can also check them out on eBay at: www.ebay.com/usr/sackinmetals11
Contact Going Ballistic at: Ballisticsmasher@gmail.com
T-Shirts Get them here while they last: www.ebay.com/str/goingballistic Развлечения
Great show Going Ballistic! Yes always wait til the end. It aint over til the fat slap sings~! U tub obviously is biased against these videos and refuses to recommend. Let's get a win for the silent majority out there! Anyone who agrees with and likes this content needs to hit like and share. Even a simple comment helps.
Thanks Mark👍🇺🇸🍺
Yeah, back in the days gun videos were lit , now it's just a minority.
You have to search for them ,before they were in the reccommended.
Oh yeah
I found this because it recommended to me by RUclips. I also gave it a like. I believe the algorithm for what gets recommended is based on what is similar to what the viewer has been watching. I have been watching a lot of gun channels lately and i think that is the only reason why this video was recommended to me.
@@GoingBallistic how about a 1.75 tungsten carbide plate.
Wow I am an ironworker and for that to penetrate 1.75 titanium plate I can't get over what it takes to go through that . Great show guys
Thank you.
Oh yeah I forgot to mention you had all my undivided attention the whole show when that happens it's a good show
Me watching them shoot slap rounds after seeing Kentucky ballistics video: 😳
@@Fr33zeBurn They are still shooting it , but they dont buy weird ammo .
@@yaykruser at barter armorers school they warmed us i don’t know how many times, not to shoot sabot rounds through a .50 with a MD.
@@DGTH1992 They also warn to use Winter tires in summer, and thats probably worse than shooting the slap round, but if you do it it doesnt mean you instantly die.
Those sabots cant blow up a chamber if they plug the end of the barrel, its physically impossible , there is just not enought gas produced to bring the whole barrel to to peak pressure.
It must have been a problem at the end of the barrel, probably the wrong powder or a case failure.
Titanium: *gets shot by 5 of the most dangerous bullets*
Also Titanium: *"Haha stop that tickles."*
The mounting of the plate is compliant, meaning that part of the impact energy is used in moving the plate like a catches mitt. If you hard mount the plate the rounds will achieve a deeper penetration. Soft mounting increases the ballistic performance of any plate. The effect is significant. Great slow speed photography.
Also the plate is at a slight angle so the amount of material the round is having to go through is greater. This is also one of the reasons why a lot of military vehicles have slanted armor.
They are definitely not pros at mounting plates.
95% of a bullets energy is transferred to the target almost instantly apone impact.
6 months from now...
_"Today we'll be shooting this cubic yard of Unobtainium with an adjustable Plasma rifle that goes up to the 40 Watt range... We'll be shooting it from 6 feet away and behind this phased gravitational field generator."_
40 watt range ? Hey , just what you see pal .
Hahaa pretty good,and all very real just we lack the tech at the moment lol
Mine goes to 30+ amps. That is my Plasma gun. I shoot high number element chart and some low number as well.
6 decades is pretty accurate
30 years from now: still using 50cal design from 1918
I'm so happy I found your channel, this is a gem of a channel. Your testing with SLAP rounds has been some of the best and entertaining I've seen on RUclips. Keep it up!
Glad you found us.
One of my favorite channels in here! Awesome, simple and straight to the action! So underrated! Keep it up guys!
Thanks for the comment 👍
6:51 a mini galaxy was formed with the energy of the impact. I would be interested to learn why that spiral was formed in the light of physics.
That ring was so loud it almost hurt my teeth. Just imagining how that sounds for real in person.
Good times.😁👍
Very loud, and that was turned down. Lol👍
6:51 the spiraling hunk of metal shooting out to the right looked amazing!
I wish I had more of that in the video. It was really cool
Love the slo mo sparkle show!! Love the loud PING!! Damn that last slap was a tunnel maker! Wow!
Awesome guys!!! You're making a great job showing us how powerfull and destrucive are these weapons... It's amazing to see the rounds hitting the target in slow mo!!! Greetings from Brazil!!!
Thanks and glad you liked it.
Cant believe this channel only has 50k subs. This channels gonna blow up just like demo ranch and Kentucky ballistics. Mark my words!
I appreciate that
wow that titanium block really sings!
Rather strange tone as well.
The rounds are hitting that thing so hard, that it's vibrating the titanium.
They need better ballista. Nuff said. Later.
@@michaelm00n88 what is the name of gun?
@@user-td7di6ug4m barret 50 cal
I think your channel is fantastic by the way. Loads of great stuff to see here. I shall do my best to keep spreading the word.
Thanks 👍👍
Awesome man!! Keep up the good work, I have a feeling y’alls channel is about to explode
Man I hope so. Thanks 👍
Damn your channel is so good!
Also I love how Justin is always playing different characters lol.
Glad you like the channel 👍
That third shot actually made a PEW sound!
Yep that why we have the shield in front of Justin 👍
Those SLAPs are insane! Thank you.
Yes they are👍
Great flashes, and I love the MOAB logo.
Thats one wicked round, undefeated for the untamable slap
TetraHydroCannabinoL THC Slap coulda defeated any WWII tank, it seems.
@@CorePathway Many WW2 tanks has way thicker front armor than this plate.
@@qiyuxuan9437 heavy tanks yes bud medium and lights are dead
Awsome! Stay safe out there everbody!
Roger that
Thanks for the bonus SLAP round, not gonna lie I never would have thought it was going through!
Same here. I'm glad it did
Superb work on the video. Thank you very much.
Your welcome 👍
Keep dropping hammers fellas.
It looks like you've leaned the titanium plate. By doing that you're essentially increasing the plate's effective armor, meaning that the round needs to go through more metal before being able to fully penetrate. Also, alot of energy from the projectile is being transferred over onto the not-so-sturdy bench and therefore reducing the bullet's ability to penetrate armor. The angled plate is also the reason why the bullet didnt stabilize and wasnt able to penetrate properly as you said in 9:03, but it could also be because SLAP rounds aren't very well stabilized in general.
Its not a very good test, but its fun to watch. I would love to see another test being conducted where the plate is angled at something like 45-70 degrees
Hi, the angled position actually its the reason becouse the armored vehicles have that design, but would still fair becouse they will be testing the projectiles in a realistic environment, on the other hand im agree whit giving the target a free movement wich disipates part of the energy of the projectile make the test useless. cheers!
dude that is a really badass target. sack and metals i love it!
6al4v.shop/ on there shop website i can not find the 1.75 inch titanium plate? is it not for sale?
Check the eBay site. If not there give them a call👍
Tears of happyness came from my eyes at the end of the video .. love you slap round 😎
Lol 😂 👍
That's a nice safe setup
Спасибо!
Amazing how it gets through such a thick piece of metal 👍🙂🇬🇧
Right👍
Man someone at Sackin metals sure loves giving youtube channels exotic metals to mess with. From this guy to blacksmiths and back again. That same titanium sure makes a hell of a hammer as well as a target plate lol
damm it man, guy says i’ve got bulletproof armor dude shooting the 50 says i’ve got a slap round
@TheGodEmperorofMankind absorb the impact, add its not explosive
The slap has been defeated !!
Edit: lol had to edit,the slap is still King..geeez!
Awesome video👍
Glad you stayed to the end.
The slap only went through at the end because the internal core of the slab had been severely damaged by the multiple shots it had already taken. Simple physics
@@sparkynate91 I believe that's why they make rated armor of either single hit, or multiple hit at its based on its maximum rated caliber.
@@Sh4dowHunter42 I know that. But the only way this test would have been accurate, is to use a different piece for each round. Then you would be able to get accurate results. But by shooting multiple different rounds into the same slab will not give accurate data
I would concur. You couldn't say accurately that it did, or didn't defeat the round unless it was an entirely different piece each time.
I love the inclusion of the chronograph, it's really important. Thanks for sharing.
Thanks for watching!
This brings back the joy of "Smokem" if* U Gotem", nothing like fire in the morning and bit of night fire too
Thanks for the comment 👍👍
Slight bulge, you can't see it, but I can feel it.
It bends the light just fine.
Hi, I'm a 50 bmg fanboy and that's what I love about your channel
New subscriber 😍🌹
Welcome 👍
@@GoingBallistic what is the name of gun?
Great content, well done guys, i really love watching this chanel, sad its still underate, keep it up guys
People like you keep us going👍
Another awesome video from a great family friendly gun channel. Keep up the good work guys.
PS; the best name for a gun channel ever too !!!!!!
Wow, thank you very much.👍🙏
That slap rounds a beast
You ain’t kidding 👍
💥💥💥
Thanks Bro👍
Who tee who !
So glad I discovered this channel
We’re so glad you did too.👍
Outstanding. Impressive
Interesting what just 90 fps difference will do. I believe the v50 for that plate with the SLAP projectile might be in the 3600 - 3700 fps range. It would be interesting to see what a SLAP round out of a 45 inch barrel would do. It would be even more interesting to take the SLAP projectile and sabot and load it into a 20-50 Anzio (20mm necked down to .50 cal. Possibly 5000 fps?)
That would be a crazy round for sure.
You guys should measure the distance from front to back in the through and through shot. I can assure you it’s more than 1.75” of penetration given you keep it at an angle.
Facts, I wouldn’t doubt it is closer to 2” at that angle. Maybe even more
Yep sloped armor increases the width of the metal. Its why they use it in tanks.
Yep saw that, too
very interesting! thanks !
I love these test I love all of your videos keep up the great work
Glad you like them.
Going Ballistic hopefully 2 inches is enough for the normal slap round
Impressive target(s)
incendiary, explosive, tracer....doesn' matter, just the velocity dominates everything man.
True but you gotta have mass behind it as well. .50 can only produce so many FPS. A standard ball round desinigrates on impact
It is not just the speed. There are a lot of factors to determine if it goes through or not.
Thanks for the awesome content as usual! I'd still love to see you guys pull a SLAP round, or at least get some good close-up shots of the projectile.
Thanks 👍
Another awesome video, your bench is certainly the most suitable place to take a rest!!! :-)
👍
It might help to place your titanium plate upright correctly... Like you set it up the bullet has to go through like 15% more material to come out again. (but maybe it´s safer for your crew) Meaning your first bullet could have made it. Like you set it all up with a certain angle tanks are build to make them stronger. Anyway we´re not here to talk about facts but to see holes.
Like in porn.
0:11 "that's what she said"
Alex Habr - Correction, I believe you meant 2:38 😉
@@kennylenny9890 hahaha I actually commented on 2:40 TWSS down there 😂
Great video as always 😎👍 Cheers
Thanks 👍
First video I see where someone FINALLY pierced a titanium thing
👍
The other rounds including the unstabilized SLAP round might go through if the plate wasn’t angled. You lose effective penetration when the plate is angled.
I guess for a similar reason most combat helicopters have titanium tub’s.
Glad I discovered this channel, youve got a new fan from Australia. 🇦🇺🇦🇺
Awesome 👍
This guy is smart. He has a shield. Demolition Ranch is like “what’s that?”
Raufuss worked like a treat on the Taliban on my second deployment in 2011.
@I'm the real Dewitte, c'mon Sargento!This sound like a genuine taught, got it.
Sooooooo
From all the high tech rounds... Speed is still king!!!
The faster the bullet the deadlier it is
👍
loved it thanks a bunch
👍
You are the best man on RUclips with a 50. Cal
Awesome, thanks for the comment 👍👍👍
I don’t think you did the test right. You should send me all those 50 BMG rounds and titanium plates so I can confirm your test!
😂
Lol, 👍
Agree, I thought you were supposed to take the muzzle brake off firing the SLAP rounds too! :)
@irmux skeptic And ofcourse all of them for free!!! XD
@Emrah ACI .. well he wasn't speaking , this is called writing . And it was a joke .
Plenty of advertising - I hope "Going Ballistic" is getting a piece of it, rather than this channel being demonetized and ad revenue is going to U toob..
Not much but somethings better than nothing 👍
Вперёд, к 100000 подписчиков! Hooray!
I knew the regular on would make it threw awesome 👍👍💪🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸STAY STRONG!!!
Thanks 👍
0:10 I hear this from women constantly.
Edit: Awesome channel btw!
It has laser engraving!?
You do have the plate sloped at a slight angle. Thus increasing the the amount of material the round has to travel through. Without doing the math, I would guess you’re adding about a 1/4” of thickness to the material. Sloped armor is used for a reason fellas. 😉
That would have to be quite the angle,which this isn’t.
C’mon guys,it’s all ball bearings these days Yes it is.
Cool video and I love the shoot show, next. I know it a tinny thing and maybe it would be unsafe, what do I know but it would be so cool if the target was held firmly in place instead of on a broken bench etc... now I know targets are probably never vertical, and OK, set it at a safe angle but if it is fixed and solid then the results should be consistent, it isn't like you take 10 shots with each bullet :) And yes I get it, especially if the bullets are $1 or more per shot. Thanks for going out and having fun and showing us stuff.
Wow finally amazing thanks💪✌
Glad you liked it
US aircraft during WW2 had a 1/2" steel slab behind the pilot and in a few other areas. Checking out what the bullets do to 1.75" Titanium further reinforces what huge b**ls those guys had. That said, German pilots had no armour. They relied on simply(?) not getting hit.
The German pilots also had armoured seat backs..... between 6mm. to 8mm. face hardened rolled homogeneous armour (About equivalent to 1.5 to 2 Inches of Titanium).
According to WW2 US tests, the M2 Browning HMG could penetrate up to 21mm. of RHA @ 0 degrees @ 100 yards with AP/I & up to 25mm. of RHA @ 0 degrees @ 100 yards with AP.
On a US Marine Corps field test shooting an M2 HMG at the side of a captured Japanese Type 97 Chi Ha medium tank, at a range of 50 yards, out of the 100 AP bullet hits, 35 cleanly penetrated through the 9mm. RHA side armour of the tank.
Awesome video. I can't believe the slap went through.
Glad you liked it👍
Another awesome vid guys 👍🏼
Thanks 👍
Привет, парни! Комментарий для продвижения канала!
Дароу
+
Speed is king!! Why not try it at 500Yards/meter or 1000 Yards/meter. Make more sense for the caliber?
What's the point? The shells right out of the barrel start to decelerate
Dang them slap rounds are no joke nice video thanks
Thanks 👍
woooo thats explosions that was beautiful
Glad you liked it👍
I knew a normal slap round would do it. Just like an armor piercing goes through better than an armor piercing tracer. For testing penetration you should always use the non-tracer option. If I remember right the last test you only used a slap-t and while it went through i figured a normal slap would have gone through better. Anyhow keep up the good work. I am guessing a normal slap will go through a 2" also but that's just my prediction. We will see if I'm right.
Thanks, yep we will see👍
Достойно, мужики!))) 🔥
Ooh my goodness what a power.
Another awesome test.
👍
Imagine 1.75 titanium is used on tank armor
The crew would be dead 😂
I dont think shot 5 SLAP round went through. The pressure wave blew off a layer of the back side. But it didnt look like there was a hole. The round was lodged in the metal.
Great video!
👍
Yes..! These videos always save my Day.. Slap round👍👍🙋♂️🇫🇮
Glad to make your day Max👍🇺🇸
The angle of the titanium makes it more than 1.75” I would imagine ?
Agreed. Also the fact that its not solidly mounted soaks up some of the impact. Curious of that slap round would have made it through.
I wouldn't call it "angled" though. The angle is so shallow, it might add just a few hundreds of an inch.
NothingXemnas the fact it’s angled and only leant up instead of being solidly mounted all would work against the round ! It needs to be totally verticals and solidly mounted for it to be a fair test ... even a few mm of extra titanium is stronger .
@@wheats1979 50 degree slope would add 56% to the thickness of the amour 20 degree only adds .6 IE 10mm becomes 10.6mm at 20 degrees . looking at the video I don't think it was more than 20% angle But your point is very well made Sir and most Tanks now use Active
Armor which which breaks away and takes round with it
Titanium heavy??
homa
Heavier than aluminum and lighter than steel
That's a lot of titanium bro
So cool to see you guys doing these videos. Since i am from Europe there ain't much we can do here,as far as i know there is not even a place where you can shoot .50bmg in my country.
This is why i follow you guys,also Edwin, Demo Matt,Kentucky Ballistics, Who_tee_who as you all have the awsome content presented differently but equally entertaining in your own unique ways.
I hope that you guys find more supporters,sponsors so you can profit as well from this,i honestly think you deserve it. Keep up the good content and stay safe.
Thank you so much for the comment. If your ever in Colorado, contact us and we will let you shoot the 50 and some full autos👍
@@GoingBallistic This is what i was talking about. You are cool guys. I appreciate that you took time and replied to my comment. Thanks for the opportunity,hopefully one day i will have the chance to visit USA again and show show up at your range :)
Great stuff again. Cheers
Thanks 👍
I am number 2000 likes
Есть пробитие!
У нас бы сказали: возьмите калашников и не мучайтесь :)
@@Alexander_1988. какой бы калашников не был крутой, но он скорее всего такую пластину не пробьёт.
@@gamayn2110 конечно не пробьёт, это стёб над теми кто говорит что калаш пробивает рельсу, таких много у нас
A few degrees of angle makes a huge difference to armour plate as you can see from the 2 slap rounds different pens. As an added bonus there would also be a slight variation in gun powder effect on the round as you can see from the 100 ft/s difference in the round speed.
Man I got to get me some of those rounds.
“ Nice and heavy.” Huh? I thought titanium is nice and light compared to most metals.
Titanium is generally lighter because you’re able to reduce the thickness of material, while retaining the same strength as stainless steel (if not more so)
After being stationed at Ft Carson for several years, I can't mistake the backdrop of the front range with the Peak looking over. Wish I was still there to "help" do some testing.
I was stationed there too. Brave Rifles!
Yeah looks like DragonMans
That's a big gun!!!
As a new reloader, I'm curious what the brass and primers look like after these are fired.