TheWheelGuy..Absolutely trashed Audi A1 alloy wheel refurbishment
HTML-код
- Опубликовано: 11 окт 2024
- Absolutley trashed, diamond cut Audi A1 wheels refurb. These things were thrown in the skip at an Audi dealer (obv after charging the customer a stupid amount for new wheels).
Always good to see a pro at work
driver was stevie wonder himself 😂😂😂😂😂❤❤❤
I bet they're off a '1 careful lady owner' A1!? 😁
More likely overpaid careless young man😂😂😂 I feel I can make that statement after 50+ years fixing cars
What grit sandpaper did you use to sand the hair off of your arms cos I need that
very nice job! i like to know the sandpaper you used step by step i'm doing my wheels at home! thanks and keep up the good work!
when you painted the wheels and then sand the aluminum part back to its original state witch sandpaper did you use?
Sorry for the delay DJ LACURA, Firstly I use a "flap wheel" on a grinder to take the edge off, then 120, 180, 320 and 400 grit sanding discs on a DA sander. Then, make a brushed aluminium effect with either 320 gold flex pads or grey scotch bright. Still awake? grey scotch the whole wheel and use 2k diamond cut clear coat and bake for 20mins.
The wheels look good. But it would be helpful if you explained your process during the work.
WOW ! You do amazing work !
Nice video, good vision of how it go’s
Glad you enjoyed
Enjoyed this. Its given me confidence to do this lol
I have done this before on my MC40 and a Infinti G35 but have not tried to do it on my Porsche Macan because no one has the exact paint code for the wheels, my have to go to the dealer.
Could you tell me what primer you use please mate?
hey mate can you tell me the colour code of the wheels??? thanks
Hi Maybe you know what paint code it is?
You have some funny accent from the North Sir :)
Indeed, the Industrial influenced Manchester tone.
Awesome work !!
What primer did u use as u didn’t sand it after applied?
Hi what grit sanding disc do you use for them.
Hi mate, silly question but.. do these wheels need to be re-balanced after taking that much material off? saw some big craters in there
They would as they dont have tyres on. If the tyres are'nt removed (the bead only broken) they they should be ok.
I have the same wheels, but the damage is only on the lip, and I want to keep the original machined/satin finish. Is a clear coat or any type of coating necessary after sanding and polishing the machined surface?
I'm in the same boat as you.
Hiya Kris, I find clear coating the whole wheel is the best way. It keeps the grey intact while
Protecting the bare alloy lip.
Sand the lip with 120, 180, 320, 400 disks. Use grey scotch brite to polish/brush the lip and key the grey. Wash it all off with soapy water. When dry, hit it with 2 coats of clear. Ideally 2k though a gun (1.0tip hvlp is my preferred). If spray can, it’s usually only single pac clear so not very durable but you can buy 2k in a tin (activates via push button on the base).
Hope this helps.
🥷
@@thewheelguy9496 Thank you
@@thewheelguy9496 Is the grey scotch brite the 7448? There are a couple different ones.
@@Pau1ywog5 07904 3M grey scotch bright 👍
How long it take you to do 4 of those ??? I’ll
Have it prepped and in lacquer in 30 min !!!
Try using a rotary polisher with 120/180 then 400 on da then false d-cut lines with a red or grey scotch ! 💪
How careless can people be!!!.....made your job a whole lot harder.
Hi what rpm are you using with your sander?
Hi.paint code please?
Great explanation very helpful 😂
What’s there on that grinder?
Nothing near perfect but still a nice job…👍🏼
Wow...That alloy is never going to be balanced again lol, you just randomly grinded off area's
ciao amico, puoi aiutarmi ......... Quale trasparente usi, non è necessario applicare il primer sull'alluminio puro? Il trasparente 2K aderisce bene? grazie per la risposta
Ciao come stai, generalmente le ruote diamantate non usano primer dopo il rivestimento di base, quindi applico solo 2k di costi trasparenti e balle a 70 gradi per 30 minuti.
@@TheAlpins Thank you for your answer, so you say to give the 2k clear coat directly on the pure aluminum, it does not peel over time, I thought I would first give TALKEN 9041 clear primer product (only on the bare aluminum parts) and then the 2k .. ............what do you think about it ?
Shocking !!! 😂😂
grinding half the lip away is not fixing
How else are you supposed to do it when it’s a bare finish? 😂 if they were re diamond cut they would have the face re cut until they were smooth again. Different tool. Same outcome
They Look. Good. For about A week Hmmm
Exactly...
Nevermind the haters you did a cracking job mate, what colour base coat did you use or code for paint on these rotors
If you do not explain the prosses why make the vidio