thanks guy for the nice video. after replacing both housing and the screen at the same time. my iPhone 5s screen rotation and vibration is not working. during the assemble the WiFi antenna broken (tear down) and i fix it. can that cause these problems. any help. please
Great Video. I have an issue tho.. After reassembling my iPhone 5 s. I'm having trouble turning it on. The power button does not turn the phone on. So i plugged it into to the charger (just to turn it on) And it shows that the battery is completely dead (empty battery, one red bar) then it turns on (white back round black apple logo) then screen goes black, then it repeats? Battery Dead-Apple Logo-Black Screen. (Prior to the disassemble my battery was at 100%) Whats my issue? Assistance would be much appreciated..
Nice video very helpful but at 8:30 I believe you installed the home button support (little metal piece) on backwards I tried your way and the home button failed to work but I flipped it around (tab facing the lcd and home button works great.. other than that very helpul thanx
I think you made a little mistake, i'm not sure but to be confirm. On top left hand corner of the motherboard , there is a grounding contact and it should go under the grounding tab that is screwed to the to flange of the casing !
I was trying to take the old sleep button off the hinge bracket to put the new one one but the little metal plate won't come off. How do you take it off to put the new sleep button on the hinge bracket?
So I had a question, if the repair place I go to is good is there anything they can't repair? Bc I've been told sometimes they can't repair the motherboard? 😞
Depending on the severity of the damage some motherboard damage is unrepairable. Repair shops tend to vary in ability some will only replace components while some will do board level repairs.
Yeah I'm just hoping they can fix it bc honestly it's like brand new never had a cracked screen, and this all happened bc some lady put a screen protector on my phone with a puddle of liquid then they tried blaming me and I sent my phone to the corporate store and it won't even turn on.
Hi there! I dropped my phone and broke that TINY flexcable (with small "fork") that goes with the powerbutton assembly (2:06 in video). As I need to get a new one I need to know what it's called. Do you know? And what is the function of it? Is it just grounding or?? Hope you can help. I took it ALL apart by now :-) Thanks
No worries, Your phone will still function without that grounding cable. Do try to get it replaced when you get the chance, however, it is not readily available for sale online.
Hmmm ....so what does it actually do if phone will work without it? Strange that I cant buy it anywhere.... I'll cut the ends and solder a tiny wire to try fix it. Thanks alot for the reply. Regards Lisbeth
You seated the motherboard incorrectly. At the very top of the motherboard there is a screw hole that is supposed to slide underneath a bracket, and there is a metal washer under that. The bracket and the washer are supposed to sandwich that top screw hole. You should see a copper square on the motherboard next to this screw hole, one on each side actually. They should have a tiny dot indentation. These dots are from the washer and the bracket pressing into them. :-/
+dottee671 Recommend replacing your battery. However, see if your PC recognizes the device. Hold the home button while it's connected to your PC and see what the device does. You may be able to restore the unit and it may resolve your issue.
+Szilágyi Szabolcs +Repairs Universe ; does this affect the home button not given that BNIB clicking feeling, more of a mushy feeling does the home button cover is upside down?
This easy to follow, step by step video will show you how to safely reassemble your iPhone 5 so you can repair your phone all by yourself!
best repair guide i found on youtube made simple! Thanks
thanks guy for the nice video. after replacing both housing and the screen at the same time. my iPhone 5s screen rotation and vibration is not working. during the assemble the WiFi antenna broken (tear down) and i fix it. can that cause these problems. any help. please
Great Video. I have an issue tho.. After reassembling my iPhone 5 s. I'm having trouble turning it on. The power button does not turn the phone on. So i plugged it into to the charger (just to turn it on) And it shows that the battery is completely dead (empty battery, one red bar) then it turns on (white back round black apple logo) then screen goes black, then it repeats? Battery Dead-Apple Logo-Black Screen. (Prior to the disassemble my battery was at 100%) Whats my issue? Assistance would be much appreciated..
Very helpful thanks
hey sir?
no need to gule it bottom of the screen to fix??
please reply
Nice video very helpful but at 8:30 I believe you installed the home button support (little metal piece) on backwards I tried your way and the home button failed to work but I flipped it around (tab facing the lcd and home button works great.. other than that very helpul thanx
I think you made a little mistake, i'm not sure but to be confirm. On top left hand corner of the motherboard , there is a grounding contact and it should go under the grounding tab that is screwed to the to flange of the casing !
I was trying to take the old sleep button off the hinge bracket to put the new one one but the little metal plate won't come off. How do you take it off to put the new sleep button on the hinge bracket?
Yeah and how do you make the new button tight like the old button.
What's that black square on the sensor flex cable?
Well explained
Thank you so much Repairs Universe you have the best Reassembly video going, helped me alot!...
What camera did you use for this its great quality..
I'm fairly certain you missed two washers/small metal pieces. Perhaps mine is a slightly newer version?
+Joshua Perkins Possible but can not conclude this.
So I had a question, if the repair place I go to is good is there anything they can't repair? Bc I've been told sometimes they can't repair the motherboard? 😞
Depending on the severity of the damage some motherboard damage is unrepairable. Repair shops tend to vary in ability some will only replace components while some will do board level repairs.
Yeah I'm just hoping they can fix it bc honestly it's like brand new never had a cracked screen, and this all happened bc some lady put a screen protector on my phone with a puddle of liquid then they tried blaming me and I sent my phone to the corporate store and it won't even turn on.
Hi there! I dropped my phone and broke that TINY flexcable (with small "fork") that goes with the powerbutton assembly (2:06 in video). As I need to get a new one I need to know what it's called. Do you know? And what is the function of it? Is it just grounding or?? Hope you can help. I took it ALL apart by now :-) Thanks
No worries, Your phone will still function without that grounding cable. Do try to get it replaced when you get the chance, however, it is not readily available for sale online.
Hmmm ....so what does it actually do if phone will work without it? Strange that I cant buy it anywhere.... I'll cut the ends and solder a tiny wire to try fix it. Thanks alot for the reply. Regards Lisbeth
Following this video there 3 pieces left out, as in they're not shown how or where they go. Had to look up another video.
You seated the motherboard incorrectly. At the very top of the motherboard there is a screw hole that is supposed to slide underneath a bracket, and there is a metal washer under that. The bracket and the washer are supposed to sandwich that top screw hole. You should see a copper square on the motherboard next to this screw hole, one on each side actually. They should have a tiny dot indentation. These dots are from the washer and the bracket pressing into them. :-/
I wish there was a video showing that being done.
My iPhone does not power on anymore, help pls
+dottee671 Recommend replacing your battery. However, see if your PC recognizes the device. Hold the home button while it's connected to your PC and see what the device does. You may be able to restore the unit and it may resolve your issue.
hey i noticed a mistake in the video , the home button cover is replaced upside down,
helpful video thx for the upload ! subscribe
szilágyi Szabolcs Thank you for feedback.
+Szilágyi Szabolcs +Repairs Universe ; does this affect the home button not given that BNIB clicking feeling, more of a mushy feeling does the home button cover is upside down?
only the same home button working as touch id.
we cannot replace home button..
+Fahad hameed Correct, otherwise the Touch ID feature will be lost.
Thx
true best one
does this work if my phones disabled