+Cheryl Summer I am glad I could help you Cheryl with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook. facebook.com/how.to.repair.appliances
Thanks a lot. The spring-ring inside came off. Fixed in a couple minutes. Saved me a ton of frustrations. NEVER EVER buy a Candy "Smart" Washing Machine. Nothing but trouble! Too many issues to name here!
It's a bit harder on a washer/dryer because the hot air inlet makes it tricky to refit the internal band after the seal is in place. So you need to have the band flopping about in the way while you refit the seal, or take the band part and refit afterwards, or what I did was fit the seal and then disconnect the hot air feed and get the band over the top of the protrusion on the seal.
Bruno Gomes I am glad I could help you with this problem.Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. Facebook. facebook.com/how.to.repair.appliances
My pleasure! Glad it was helpful! Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi, I just did it on my Candy tx101. It seems everything ok, but now the drum scrape over the seal, producing a bad sound.. already double-checked all the seal permiter and it seems ok. Don't know how to resolve. Maybe the drum can be regulated a little backward? Thanks!
Hi I'm Noel again from Malta, should I have to use some glue to re-attach the hoses to the drum please. Thank you once again the video was really helpful.
We have a candy washing machine GO FS 262.... my husband has taken the gasket off and is having trouble putting it on - but ours doesnt look like yours ?
Newer ones are even worse. Not only do they not come off the fronts but they have replaced the inner band with a sprung one with no ratchet so it's permanently tensioned
make sure you have the band the right way round and the seal is fitted correctly. I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook. facebook.com/how.to.repair.appliances
@@How-to-repair I see you asked this question 6 years ago, If your having the same problem as me then you're still trying to fit the gasket... lol Try washing up liquid on the seal.... it helps.
A huge thank you! Without this clip it would have taken me hrs but I watched it twice and was done in 20mins start to finish. Thanks again. Jon
iam glad we could help dont forget to get a beer in how-2-repair.com/buy-paul-a-beer/
Just wanted to say thank you, I fixed it. You have saved me lots of money on repairs.
+Cheryl Summer I am glad I could help you Cheryl with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook.
facebook.com/how.to.repair.appliances
how-2-repair the belt on back of washing machine
Thanks for the vid, def a challange on my candy washing machine. Found using washing up liquid on the edge of the drum helped heaps!
Thanks a lot. The spring-ring inside came off. Fixed in a couple minutes. Saved me a ton of frustrations.
NEVER EVER buy a Candy "Smart" Washing Machine. Nothing but trouble! Too many issues to name here!
It's a bit harder on a washer/dryer because the hot air inlet makes it tricky to refit the internal band after the seal is in place. So you need to have the band flopping about in the way while you refit the seal, or take the band part and refit afterwards, or what I did was fit the seal and then disconnect the hot air feed and get the band over the top of the protrusion on the seal.
I am glad we could help you with your washer remember to join us on facebook
try adding a smidge of washing up liquid when trying to add the new gasket... helped me.
thanks. it helped a lot in my candy cne108t. same process but i didn`t remove the lid, too much work and i could do it trought the front.
Bruno Gomes I am glad I could help you with this problem.Please remember to help us by posting the video or website on your timeline. This helps us a
lot and if we really helped you can always buy us a beer
how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
Facebook.
facebook.com/how.to.repair.appliances
Thank you for this, appreciate it 🙏
My pleasure! Glad it was helpful! Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Magic this saved hours
Excellent thanks❤😊
You're welcome 😊
Hi, I just did it on my Candy tx101. It seems everything ok, but now the drum scrape over the seal, producing a bad sound.. already double-checked all the seal permiter and it seems ok. Don't know how to resolve. Maybe the drum can be regulated a little backward? Thanks!
Hi nice video, I have an old zerowatt 484 where can I buy the seal for it?
Hi I'm Noel again from Malta, should I have to use some glue to re-attach the hoses to the drum please. Thank you once again the video was really helpful.
We have a candy washing machine GO FS 262.... my husband has taken the gasket off and is having trouble putting it on - but ours doesnt look like yours ?
thank you prof 🙏
You are welcome
I have a zero watt machine, having trouble finding a replacement part. Where would I get one from?
Bitch of a job to do on my hoover machine, ended up taking the drum out. Was no way to get to that clamp, it was down the bottom'ish of the drum.
Just done a Candy grand vita.
Took 6 hands (3 people) to hold the seal in place on inner drum whilst getting spring type seal cable on.
but howd you get the top off????!!!! mine wont budge without breaking something....
Thank you
Newer ones are even worse. Not only do they not come off the fronts but they have replaced the inner band with a sprung one with no ratchet so it's permanently tensioned
Is there anything that can be done? I am stuck on this for the last few hours and seriously contemplating just buying a new washer.
could you take a look at my video of my hoover nextra and help me diagnose the fault with it please and comment on the video thanks
will this method work for A3110? thank u
yes it will be good for this model
many thanks!
Very helpful.... but why does he use the phrase "in situde"? It's even repeated in the subtitles. No such word as situde. It's "in situ"
also PLEEEEASE LOSE THE MUSIC
This is impossible!!
No it's not
God,having terrible problem to get the joint in, it keeps on popping,any tips please???
It is a Candy ...
make sure you have the band the right way round and the seal is fitted correctly.
I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook.
facebook.com/how.to.repair.appliances
@@How-to-repair I see you asked this question 6 years ago, If your having the same problem as me then you're still trying to fit the gasket... lol
Try washing up liquid on the seal.... it helps.
Thank you