The picture on the last page of that page you attached.....if your speaking of those fasteners then those are found on the inside door panels. They come in black and also colored matched to the door panel colors. They are interior fasteners. The factory original (unless replaced by someone else) are of the style I showed in my video.
Great video - very helpful Same question as Clifton below -- how did you access the bolts crammed in the corners? What tool(s) did you use? ...or do I have to remove wheel well covers and access that way? Thanks!
Thats awesome. Glad that they help. Its always cool to hear back from people in the industry and that they are watching my videos. Make sure to subscribe and keep watching!
Thanks for taking the time to make these videos. I've used them to not only pull my fascia, but to replace my radiator as well. Not exactly new to auto work, but watching your videos has saved me a ton of time looking for specific fasteners and bolts.
+Frore Scoville Thanks Frore for the comment. Its much appreciated. Don't forget to subscribe and help spread the word by sharing these videos with others.
Thank you for the video. I found this video very helpful. I will need to replace the front bumper on my 2009 Dodge Charger SXT, you make it look easy. Now to order my parts.
+Gary Haven Walton If your speaking of the upper bolts in the corner.....I actually used a crodless drill and 10mm socket. In the video at the 4:10 mark you can see me removing them. You can use a long extension and ratchet as well.
+Gary Haven Walton The other 2 bolts that are a bit deeper down inside I used a short 10mm wrench and loosened it enough so that I could take it off the rest of the way by hand. The audio sucked at the point in the video where I show that. Not sure if you have access to those 2 10mm bolts from the fender well liner opening.
any chance you'll be making or could make a video on the removal of a 2015 model charger's bumoer removal, II got into an accident and I'm trying to do the repairs myself but I'm having a bit of trouble.
If you watch it again you will see at the 4:00 mark that I remove the 10mm bolt at the upper corners of the bumper cover where they bolt to the fender.
The two year models are completely different body styles. I feel pretty good at saying that no they will not interchange just based on the body style difference.
I dont know if there would be any issues. I would think that everything should go together the same way but without having done it myself.....I cant be 100% certain. Thanks for the question. Make sure to subscribe
9BLAZED9 Evening, the replace the front bumper will usually run about 1 hours labor which depending on the labor rate each shop chargers.....would be around $100.00. some shops may charge more.....just depends. Depending on the dealership, they may even refer you to their body shop or a body shop to have it replaced. Each is different. Thanks for the question
drew Till morning Drew....there will be some movement being that its flexible but for the most part....no. once the top, bottom, and sides are attached.....its stays pretty much firmly in place.
drew Till you might want to get them to recheck it Drew just to be sure. that amount of movement for a flexible bumper cover really isn't that much. If its making contact with the headlamp then that would be why I would have it rechecked.
+Hustler Page as in compared to the Charger in the video. I will check more into it when I have access to a computer hopefully later today to be 100% certain that there isn't anything Ver different then the video of the Charger
+Hustler Page It shows to be actually easier then on the charger....you don't have to fight to get to that 10mm that's hard to get to from up top at the fender corner. Otherwise its the fasteners along the top, the bottom and the fender well liner area where they both meet
Working at the dealership..... Everyone of the fasteners I have found on this front end have been different then what your speaking of. Pushing in on the fastener has no affect. They make a special plier for the fasteners I mention for pulling the center portion of the fastener out before removing the lower portion.
www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&docid=89RvsKyOMZ4AdM&tbnid=5yXUxI-qrPwRtM:&ved=0CAUQjRw&url=http%3A%2F%2Fwww.justanswer.com%2Fdodge%2F1vuak-replace-2005-dodge-magnum-headlight-assembly.html&ei=U0CBU_q_GsT7oASA5oHACA&bvm=bv.67720277,d.cGU&psig=AFQjCNF7ZRsz_4cEAcc5NQT6tELzsY2MCw&ust=1401065934172041…..there u go these are the one I'm telling u and seem they have that little circle in the middle to release.
How about showing that it is best to pull the inner fender liners to get to the hidden nut and stud, I like how every video says it's there but, not on person tells or shows how to get to them. Just saying. Otherwise good video.
With lots of cuts on my hands, tons of swearing and one hour later for both of them i finally got them off.. This whole bumper removal could've been so easy if there wouldnt have been these two f*cking nuts xD
Physically bolting up.....I would think so. I dont see where the fenders would be any difference for example. I cant be 100% sure but I feel it will. Thanks for asking and make sure to subscribe.
Thank you sir. I appreciate you watching it as well. Make sure to subscribe and I have plenty more videos on that same vehicle so make sure to check out the playlists
The picture on the last page of that page you attached.....if your speaking of those fasteners then those are found on the inside door panels. They come in black and also colored matched to the door panel colors. They are interior fasteners. The factory original (unless replaced by someone else) are of the style I showed in my video.
Great video - very helpful
Same question as Clifton below -- how did you access the bolts crammed in the corners? What tool(s) did you use?
...or do I have to remove wheel well covers and access that way? Thanks!
very helpful. thank you!
helps on quoting a customer before bringing the car in for the job.
+Fernando Sanchez Glad it helped. Make sure to subscribe!
I'm a full time tech/service writer.. Your vids help us out on Chrysler vehicles
Thats awesome. Glad that they help. Its always cool to hear back from people in the industry and that they are watching my videos. Make sure to subscribe and keep watching!
Thanks for taking the time to make these videos. I've used them to not only pull my fascia, but to replace my radiator as well. Not exactly new to auto work, but watching your videos has saved me a ton of time looking for specific fasteners and bolts.
+Frore Scoville Thanks Frore for the comment. Its much appreciated. Don't forget to subscribe and help spread the word by sharing these videos with others.
When installing the front bumper cover.... do you start from the middle or start from either end and work your way to the middle?
Great video, thanks!! Side not, that nut crammed down in the corner (where the side panel and bumper meet) was a huge pain to get out.
It sure can be......not sure if removing the inner fender liner would help but it would require more steps for sure. Make sure to subscribe!
Awesome video, I'd like to know in real time how long it takes because man the video makes it seem so quick
Taking it of is about 15-20 minutes max.....really not a big job....just looks big. Thanks for asking Chris and make sure to subscribe.
4:38 do I remove that NUT the same way I remove screws ???? With a ratchet and socket????
Thank you for the video. I found this video very helpful. I will need to replace the front bumper on my 2009 Dodge Charger SXT, you make it look easy. Now to order my parts.
How much was your parts and what website you use
Great video! How did you get the bolts off that are cramped in the corners?
+Gary Haven Walton If your speaking of the upper bolts in the corner.....I actually used a crodless drill and 10mm socket. In the video at the 4:10 mark you can see me removing them. You can use a long extension and ratchet as well.
+Gary Haven Walton The other 2 bolts that are a bit deeper down inside I used a short 10mm wrench and loosened it enough so that I could take it off the rest of the way by hand. The audio sucked at the point in the video where I show that. Not sure if you have access to those 2 10mm bolts from the fender well liner opening.
Y'all heard that Tupac bumping in the background?
Good catch....most dont pay attention to it....but a few do pick up on it.
any chance you'll be making or could make a video on the removal of a 2015 model charger's bumoer removal, II got into an accident and I'm trying to do the repairs myself but I'm having a bit of trouble.
I will keep it in mind as a future video. Make sure to subscribe so that you get notified when one such as that gets uploaded. Thanks for watching
Can I use a bumper from a 2007 charger on my 2006 charger
From what I see online it looks like you can. Thanks for asking and make sure to subscribe.
What do you use to get those bolts off crammed in the corners?
love how you just skip past the 10mm behind the light.....care to explain how you got to those???
If you watch it again you will see at the 4:00 mark that I remove the 10mm bolt at the upper corners of the bumper cover where they bolt to the fender.
it's possible to change the front of a dodge charger rt 2008 to 2011 model?
The two year models are completely different body styles. I feel pretty good at saying that no they will not interchange just based on the body style difference.
no its not same 2011 is a different style only 06 - 10
is it possible to change the front of a 2017 dodge charger sxt to an R/T?
I dont know if there would be any issues. I would think that everything should go together the same way but without having done it myself.....I cant be 100% certain. Thanks for the question. Make sure to subscribe
So how much is it to replace my 06 charger factory bumper for a different one at the dodge dealership?
9BLAZED9 Evening, the replace the front bumper will usually run about 1 hours labor which depending on the labor rate each shop chargers.....would be around $100.00. some shops may charge more.....just depends. Depending on the dealership, they may even refer you to their body shop or a body shop to have it replaced. Each is different. Thanks for the question
No no no no, thank YOU for the answers. I appreciate it.
The bumper itself is $900.
Is the charger front bumper supposed to wiggle at all
drew Till morning Drew....there will be some movement being that its flexible but for the most part....no. once the top, bottom, and sides are attached.....its stays pretty much firmly in place.
I just had mine replaced and it looks like its resting on the headlights. ...l can lift it up and down bout a 1/4 inch
drew Till you might want to get them to recheck it Drew just to be sure. that amount of movement for a flexible bumper cover really isn't that much. If its making contact with the headlamp then that would be why I would have it rechecked.
drew Till
good video!
Much appreciated! Thanks for watching and dont forget to subscribe
Nice video
I appreciate the comment. Thanks for watching and make sure to subscribe and help spread the word by sharing these videos with others
Thanks again!
+Gary Haven Walton Any time. Thanks for watching and make sure to subscribe
would this process work aswell on a dodge 07 magnum sxt?
Fundamentally it's the same. There will be some slight differences.
+MotorCity Mechanic as in what? because I need to replace my bumper and headlights..
+Hustler Page as in compared to the Charger in the video. I will check more into it when I have access to a computer hopefully later today to be 100% certain that there isn't anything Ver different then the video of the Charger
+MotorCity Mechanic awesome thanks... I was looking at some of your videos and there awesome I subscribed right away
+Hustler Page It shows to be actually easier then on the charger....you don't have to fight to get to that 10mm that's hard to get to from up top at the fender corner. Otherwise its the fasteners along the top, the bottom and the fender well liner area where they both meet
Those fasteners have that little center push pin in the middle that your suppose to press in gently and it will dissengage them easily…….
Working at the dealership..... Everyone of the fasteners I have found on this front end have been different then what your speaking of. Pushing in on the fastener has no affect. They make a special plier for the fasteners I mention for pulling the center portion of the fastener out before removing the lower portion.
www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&docid=89RvsKyOMZ4AdM&tbnid=5yXUxI-qrPwRtM:&ved=0CAUQjRw&url=http%3A%2F%2Fwww.justanswer.com%2Fdodge%2F1vuak-replace-2005-dodge-magnum-headlight-assembly.html&ei=U0CBU_q_GsT7oASA5oHACA&bvm=bv.67720277,d.cGU&psig=AFQjCNF7ZRsz_4cEAcc5NQT6tELzsY2MCw&ust=1401065934172041…..there u go these are the one I'm telling u and seem they have that little circle in the middle to release.
Any videos on how to replace the rocker panel molding on a 2007 Charger rt?
Currently I dont. I will keep it in mind as a future video. Thanks for asking and make sure to subscribe
How about showing that it is best to pull the inner fender liners to get to the hidden nut and stud, I like how every video says it's there but, not on person tells or shows how to get to them. Just saying. Otherwise good video.
How did you guys get that deep 10mm nut off the stud? That’s the only thing holding me up lol.
With lots of cuts on my hands, tons of swearing and one hour later for both of them i finally got them off.. This whole bumper removal could've been so easy if there wouldnt have been these two f*cking nuts xD
Does the 2006 srt8 bumper fit.the 2006 sxt or will I need more parts
Physically bolting up.....I would think so. I dont see where the fenders would be any difference for example. I cant be 100% sure but I feel it will. Thanks for asking and make sure to subscribe.
I love it your video
Thank you sir. I appreciate you watching it as well. Make sure to subscribe and I have plenty more videos on that same vehicle so make sure to check out the playlists
hey where you located? I would like to get my bumper fixed
I'm just outside of Augusta Ga. I can remove the bumper for you but I am no body guy. Thanks for subscribing and for commenting
okay.. i figured you were in Detroit.. Because it said MotorCity
I just have respect for Detroit and plus I work all day long on vehicles that were build in or around Detroit.
I respect the work I see you do as well..
Thanks my friend
Tupac starts playing @ 5:19
I cant tell you how many people comment when Tupac comes on lol. Thanks for noticing! Make sure to subscribe
Lol😂
Horrible video.. SHOW US