Это видео недоступно.
Сожалеем об этом.
How to remove paint and varnish from wood
HTML-код
- Опубликовано: 26 апр 2011
- If the paint is peeling off your wood and you want to repaint or if you want to get a natural wood finish again then watch this short video. It will show you how to easily remove old paint of varnish to get back to the wood.
The door @1:39 is blatantly a new, never-painted door-not a chemically stripped previously-painted door. It's disingenuous for a manufacturer to so obviously mis-represent their product. It's simply not what a chemically stripped door looks like. You've now convinced me to never purchase or use Polycell products. Good job.
totally agree. If h got in there with sandpaper or something I might not second guess it.
with that much trouble you should just buy a new like he did
Ah, man! You just shot down my hopes.
👍👍👍👍🤪🤪🤪🤪👍🏴🤔😂
yes lets simply install a new door and con everyone watching.
No doubt, what a tool.
Can't wait to use this and said steps on my 1902 edwardian doors.....a brand new door is waiting.....
you see, I'm stuck on the step in between stripping and sanding where I can't get the wood perfectly clean like that obvious new door you installed.
Amazing! I will definitely buy this product. If you buy this, you also get new door, for free. Amazing!
Clearly - Step 4 - Should be "buy a new door and hang it before continuing your video"....
I have just purchased “No nonsense” paint and varnish remover from Screw Fix 2.5 litre for £19.99, i used it on an old 1940’s Oak Drinks Beurau which was very very heavily dark stained plus had heavy Nicotine engrimed into it, it felt awful, this stuff is amazing so im glad i got bigger size ready for next project. The shite that came off was like TAR and was Black, messy but so worth it.
can i use paint striper on Gyprock because old paint on house don't think they done it right. ..so possible for me to strip of gyprook ?
I'm trying to remove some of the varnish, and paint off of some beams. The beams are brown, and glossy, and smooth, and have a white layer underneath. I've been sanding it off with a sander to get down to the basic wood, but it's an agonizingly slow process, and takes a lot of effort. Would this work for striping off the finish on the beams?
Look at the door's bevel height in comparison to the top of his head during each section and the door replacement becomes evident. Lol.
Exactly. If someone is conning me I always appreciate a competent attempt. This is just sad
Will this work on primer under the wood?
How does this work on internal door frames doors skirting
I'm convinced that's a new unpainted wooden door, not the original door with the white paint removed. Something about the unpainted door screams "brand freakin new"....Just saying! It would have been nice to see how the door transitioned...that's if that was indeed the same door. : \
yeah they cutted the seen
I have questions this camical can use to wall or not
Is this product for sell in the states?
Bullshit!! Look at that new door!!
I'd like to remove paint off the walls in my bathroom. Would this technic still work on walls?
What is it called and where can I get it
What about stripping knotty pine?
Is paint stripper available in india ??
@ToaRanen7 - try using a scraper with a blade or a hand/electric wood planer...
Your video is fake does it say on the tin you need to buy a new door...? Because you clearly have.
Exactly what I was going to say
lol, no one was fooled by the new door.
Stacie Shannon most ads for soaps, washing powders, liquids use this trick
Saying the same thing. lol
Is that really the after effect as the stripped door is so clean. Looks bran new.
***** thats cheeky. Lol. But well put togaver
@beckigreen Hi Becki, I am afraid it is not available in the US, only in the UK. I am sure there are some other great paint strippers available for you there though.
just delete the video damn you
Warm air pistol is the best way and then a nice sanding with No150 or 180 depend!!!
PLEASE PLEASE PLEASE someone help. I have a wooden vanity and on it along with my other stuff I have one of those fancy decorated boxes that looks like a book, but is empty on the inside and holds things. Its a box you might use to hold your T.V. remotes.. Anyways, it is stuck tight to my vanity! I did not glue it, but I used to set drinks on top of it, and when the ice in the drink melted, the condensation would run down the sides. I set kool-aid on top of the box a couple of times on accident, and my theory is that the sticky sugary liquid dripped down to the sides and stuck the box tight to my wooden vanity. It is seriously stuck, any ideas on how to remove it without damaging the paint on my vanity too bad?
Sorry for the delay! Our paint strippers would have been suitable for your beams. Using a metal scrapper would also work, but then you may damage the wood underneath.
Dose it really strip so much paint off in one application or is that another marketing trick. The stripper I'm working with is much less effective. Please confirm
Lovely
It's never ever ever that easy.
You've even used two different doors at the end! First one has a geet crack down the panel and three knots across it, the second one is a totally different door. Two unpainted, new doors!?
Three door video
Can I use this in a guitar?
Yup, buying a new one works wonders
Haha, and its that easy Isn't it? I'm renovating my staircase and I've been at it for three weeks now and I've only just reached the upstairs. The only way to do it is to buy a rough wheel for your drill and blast the paint off and scrape off what you cant reach. Nitromors, this Polycell stuff, they simply dont work.
LOL new door at 1:38 LMFAO
Well, bought and used, it seen like it needs almost 1500ml for one standard door, it means 3 tubs 500ml x £10 and result isn't finally.
Guest 5 tubs 500ml, should be ok? Isn't ?
@1:39. Hmmm.. Are we supposed to believe that isn't a brand new unvarnished door? Reeaaalllyy!?!?
No way bro....you did not do all that work with the door still on the hinges. You would have gotten stripper on the door jams. I hate fake videos. Just because you have that "tv British accent" doesn't make you legit. I won't be buying this product.
Michael Sherrill I was wondering how none of that magic stripper affected the jamb 🤷🏼♀️
OK I kinda understand why they would replace the door instaed of stripping it for the video but why yet another door for painting!. The knots are all different! That's 3 different doors!!
start with heat gun then strip with nitromorse and coarse wire wool
SIMPLE nice demonstration
You'd have to strip it, use a hot gun, strip more, then sand the bollocks off it. And you still probably wouldn't get it looking like that.
I've just spent all friggin day, stripping a door frame
😂😂😂😂😂😂😂😂😂😂😂 in an otherworldly place I’d be........P&D 🏴🤪
AMAZING !!! Stripped that entire door... and not a BIT of the stripper got onto the door frame!! hmmm ... I don't THINK SO!!
This is the block for the British Gas boiler advert
hahaha new door.
step 5 get the sandpaper and start the paintstripping
Great to see that woodprix has new instructions to save my money and energy to build it.
Where’s the penguin lol
REALLY??????
Come on man!
Is not the same door
Should of wore a dust mask also when sanding!!!
original door had dark finish
Just sand it. It will come off. Really people its wood the best to remove it is to sand it off
Obviously a new door. It would look patchy with specs of paint and varnish if he actually did it.
Thank your vid to let me know there's something called "paint remover". I went to the store at my place and bought one can of paint remover (liquid) and it cost me only $1. I applied this liquid on my old door and waited about 10 seconds and removed the old layer of paint. Woo, it really worked ~
ha ha, it'd never come up that clean....bullshit !!!!
This time I will use woodprix instructions to make it easy with my own hands.
I made it with woodprix handbooks !
You can make it yourself, just loook and learn from woodprix.
woodprix is full of awesome tips. Very helpful to me. Thanks
Laughed out loud when the door changed! What a joke.
that just made me laugh - you skipped to a brand new door !!! ta - ra! hahahaha... you left out all the interesting bit - hours and hours of annoying scraping and swearing...
There's no reason to do this inside the house. Remove the door by tapping out the metal hinge pin from the door hinge. Take the door outside so your house doesn't get covered in dust or smells. And most importantly to protect your lungs.
Make it yourself thanks to woodprix plans. I think it's the best way to learn how to build it in the cheapest way.
Woodprix is nice for that.
Scraping the stripper upwards like that will just cause the stripper residue to fall on your unprotected arm and start burning your skin. Very poor techinque.. Im not even going to mention the new door. Lol.
You guys never stripped a door before?? 🤣🤣
Bollocks that's a new door
Bravo! Simple and clear instructions!
I'm sure you can find awesome woodworking plans on woodprix website
White spirit? Is that rubbing alcohol or turpentine, for us Yanks...
mineral turpentine or turpentine substitute
so i made it too . just by using Woodprix woodworking plans :)
I laughed out loud.
I bought instruction from woodprix and I build it very very cheap.
That's so bad....from Polycell too........!!!
I was just about to say that's a brand new bloody door, stripping gloss off doors is a waste of money and time the total cost is equal to replacing the door, saving yourself days of labour and far better finish when startig fresh, what a load of crap
Just go to wood prix website if you want to know how to make it yourself.
This is not cost effective
My advise is to paint over it .. Takes ages or get the pros in
Woodprix is full of amazing tips. It helped me a lot.
restofthefuckingowl
Or just buy a New door like he did😂😂😂
Avoid this!!! It's too much mess and chemicals. Use heat gun better. Much more officiant. And easy peel off
Pfff haha hey look at the brand new door were using to prove our product is shit.
And by how thick he's spreading that on there, ya gonna need 5 tubs for every door.
Well done polycell for fucking over ya own product.
Who are you fooling?That's not the same door...:)
Is this a parody or somethin
Wow.... gloves, safety glasses... and no helmet? Come on, you might breath noxious fumes and fall down.
@ToaRanen7 try making yourself go away?
I've stripped a lot of wood furniture and moldings (even doors) of paint and various coatings and it just ISN'T that simple. The stripped door your showing is a new door or you have done extensive additional work (such as sanding with the door off). I'll bet my house that you can't achieve that finished door with your product and a hand scraper. Why would anyone trust any Polycell product when you produce this deceptive crap?
bad poicell
Bought this...it is total shite. Left for 4 hours and it has formed a super resistant coating on my bench that now requires more effort to get off, than the original paint did by sanding. Do not buy this stuff. Seriously...applying marmite will work better...
Charlatan, that's a new door!
Lol this is just laughable.
Today's paint strippers are absolutely crap cos all the main hazardous chemicals have been removed for 'health & safety' guidelines 🙄
I smell shite.
Terrible rubbish. That bloke has never stripped old oak before.
Ok... 4 hours per application. And stripping will take an hour or more. Wow.... im never going for it. This is just advertisement purpose.
You can make it yourself, just loook and learn from woodprix .