Hi , both the red lights in IR proximity sensors Hw 201 are always on , hence the sensor is not working , what could be the reason ? The circuit connection with transistor and resistor is correct .
भाई किसी पाईप डराई मटीरीयल, जैसे पलासटिक दाना या गेहूं वगेरा हवा के जरिये जाता है तो वो चोक होने पे ये सैंसर काम करेगा कि या कोई और लगेगा पलीज बता सकते हो।
Röle olmadan sürekli açık kalır devre inandırıcı gelmedi denedim olmadı sürekli açık kalıyor ama role anahtarlama yada transistör lazım sensörün çalışması için saçma açıklaman lazım
U can use 9v batter but connect the 7805 IC between battery and ir sensor. 7805 helps to reduce the power voltage. Battery voltage 9v after using 7805 u will get 5v steady power supply from battery to run ir sensor.
But in my proximity sensor when I connect my Battery + with sensor vcc and battery - to sensor gnd my sensor both light get start and my motor starts working automatically . Any solutions ?
Sir...transistor aur resistor ka kya kam hai. Meine online me order kiya tha... Circuit diagram sabh sahi hone par bhi water pump kam nahi kar raha. Aur...sensor ka dono light red zal raha hai.
sir mene 3.7 volt di ya. Vcc me, positive wire or motor wire, gnd me negative wire, out me motor wire, red light aarehi hai jab me hat le kar ja raha hu work nahi kar raha hai plz solution
Bro. Is circuit ko A.C bulb per kis tra use kr skty hen. Ap k light projects itny useful ni hen. Because these projects are not regular use as A.C. bulb use.
Ac bulb ko jalane ke liye ek relay wala circuit banana hoga, aur relay ko operate karne ke liye mosfet ya transistor ka use karna hoga, aur mosfet ya transistor ko trigger karne ke liye ir sensor ke jariye signal dena hoga
Sir is it possible for you to make a video to control load like tubelight fan to operate using this IR sensor. Ir sensor should act as a switch (on / off fan or light ). If possible please make a video on this.
IR सेंसर के बारेमें अच्छी जानकारी दी, प्रोजेक्ट भी अच्छे हैं | 👍
Thanks! I don’t speak your language but I was able to follow and it worked!
Thank you so much❤😊
Amazing bhai..bahuri badiya
Thank you bro
Hi , both the red lights in IR proximity sensors Hw 201 are always on , hence the sensor is not working , what could be the reason ? The circuit connection with transistor and resistor is correct .
Just rotate screw anticlockwise problem will get solved
Or use a led
Explained nicely thanks
Very nice video brother 👍 thanks
Thank you bhaiya..
Bahut acha explain kiya apne.
:)
Thank you bro
@@AKGTECH sir kya hum khud se y proximity sensor bana sakte h kya
Agar haan,
Toh sir,
Ye 2-leg ir reciever ki jagah, 3-leg wale ir reciever ka use kr skte h kya.
Same connection se 3 pin LDR module bhi kam Karega kya while using without relay circuit.
Yes
Kya humlog Pehle wale mein buzzer ke jaga DC motor is kar sakte aur fire ke jagah tv remote use kar skte please bataiye
Hooax tutorial, perlu transistor untuk menghidupkan dinamo
Boht he achy se sikhaya
Thank you bro
Sir mujhe ghar mandir k liye sensor saund ki awaj se sensor door khule sir kon sa sensor ❤
Very good explanation
I have a question, can we on light and buzzer at the same time?
Yes
My sensor is working opposite
When it fires the alarm is off and when. There is no fire then alarm is working
👍🤣🤣🤣
can Ir sensor work with other object as plastic, metals etc?
I tried this method but nothing happened ir sensor work but it cannot drive the DC motor 3.7v direct to load
GREAT IDEA IT WORKED
IN MY PROJECT TOO
Hello sir can we do 3rd project with normal dc motor
Yes
Can I use simple wire for output
Mujhe 3 no. Ka ulta process karna hai..... matlab haat lane se LED bandh hoga aur haat hatane se chalu hoga...pls tell me the circuit..
Where to get this output wire
I got negative and positive one but not output
Pl reply
Yes this issue is coming
Sir ye Vali video per add chalu karo ye video recommendations me ja Rahi hai
भाई किसी पाईप डराई मटीरीयल, जैसे पलासटिक दाना या गेहूं वगेरा हवा के जरिये जाता है तो वो चोक होने पे ये सैंसर काम करेगा कि या कोई और लगेगा पलीज बता सकते हो।
Superb theft alarm ❤️👍🏻
lekin kharidna kaha se hai, all stuff.
Roboelements
Bro maine motor chalai pr nahi chl rahi kaise challau plz bata do
Battery Kitna volt ka Lena chaiye??? Keya 4v battery or 9v battery se Kam chalega???
Thank u soo much ❤
Hi this project is electromagnetic Waves based or not
Kya ise smartphone ke sath connect kiya ja sakta hai ?
Aisa ho sakta hai ki ek bar hath samne laane per shuru ho jaaye jab tak hath dobara na laye chalta rahe. Continously hath samne na rakhna pade?
Iske liye apko relay use krnq hoga ,usme dono option ate h
230v fan ya balb ac current wala chala sakte he
Iska range kitna hai
Kitni door tk IR ko detect kregi
Nice nice
Bhai aapka 2nd Bala project work nahi kar raha hai please kuch solution do
Hello sir Kay 2 sensor we 1 dc mother cala sakte hai two wey
Is circuit k st 12 opret ho sakty h
It can be controlled by any tv remote?
Yes
ningal fire annalo 🔥💧
Good🎉
Röle olmadan sürekli açık kalır devre inandırıcı gelmedi denedim olmadı sürekli açık kalıyor ama role anahtarlama yada transistör lazım sensörün çalışması için saçma açıklaman lazım
Hello sir, Buzzer kitny volt kaa hona chahiye. My buzzer wad 12V and it is not working
Yaar mera ir sensor hi jal giya 😭 mai nai 13v lagya uss mai motor k saath
Use 7805 IC between battery and ir sensor. It will help to reduce voltage from 12v to 5v
Iski sensitivity range kitni hoti h ?
Bhai agar ir sensor ki bajae ultrasonic sensor lgae to kya kam karega
Sir amezing
Thank you
Great
Very good video keep it up super. Can we give 6v or 9v power ??? Please reply.
I recommend not using more than 6v because it can damage most sensor
U can use 9v batter but connect the 7805 IC between battery and ir sensor. 7805 helps to reduce the power voltage. Battery voltage 9v after using 7805 u will get 5v steady power supply from battery to run ir sensor.
Ir sensors battery connection ke bad dono light lag rahe hai
Sir 2nd project automatic fan k liye kya kya chahiye aau kese fitting karna hai
Aise hi water ke pass le jaane per bhi sensor kam Karega kya
Wyse toh koi saamne object ho toh work karta hai,i thik work karna chahiye
Signal output wala wire negative hota hai kya plz reply
Bhai first project mein ullu banaya fire kya usi jagah par hath bhi rakhoge tab bhi buzzer bajega
Maine ek Khalifa hai model HW201 LEKIN WOH OBSTACLE ANE PAR LED OFF HOTA HAI AUR OBSTACLE NAA HO TOH LED ON REHTA HAI
If i keep my hand on the sensor
Is it work
What type of battery are you using?
18650 lithium ion 3.7 volt battery
Kya servo motar bhi work karegi
nice
Sir , maine Automatic dispenser bnaya but wo continue water pump kar rha hai plz aap btaiieyye kya karun?
Thannu bro
Sir but me connection dene se hi wah light on ho jara he or mera to iska opsite ho raha he..
amazing
Thank you bro
Is it works
I have tried this project but my IR sensor is not working...what can I do...
Mine too
Sir where is the shop please I need
electronic comb online site
Thanks you bro 😢
Wlcm 🤗
Hi, if you put that inside the windshield of the car, it gives a rash on it rains
Remote se kam karega ke nahi
Sir Input kitne volt tak de sakte hai
5v dc
मैने इस ir sensor के out put पर 3 volt DC की मिनी मोटर कनेक्ट की पर मोटर नही चली ....?
The battry is lithum or not ??
But in my proximity sensor when I connect my Battery + with sensor vcc and battery - to sensor gnd my sensor both light get start and my motor starts working automatically . Any solutions ?
connect the motor's -ve to out pin of the ir sensor
Nice info bro one question. IR Sensor 12v pr use kr skta hu?
Nahi bro ir sensor 5 volt pe work karta hai, lekin agar koi 12v ya us se jyada volt wale appliances ko chalane ke liye relay ka use karna hoga
Hlo Bhai ese khaha se kharide. 😅
Bro i used the same sensor but it was a diffrent model but it still worked
Sir amazing explanation
Bhai me 3 project eksath jodunga
Fire ke wajase gora ya light
Sir...transistor aur resistor ka kya kam hai. Meine online me order kiya tha... Circuit diagram sabh sahi hone par bhi water pump kam nahi kar raha. Aur...sensor ka dono light red zal raha hai.
Ac line me kam krega?
AC prayog kaise Kare ispe
Lixeira automatica sensor ?
I use 5v usb for power supply same dc motor use and its not working
Thanks
Wlcm
sir mene 3.7 volt di ya. Vcc me, positive wire or motor wire, gnd me negative wire, out me motor wire, red light aarehi hai jab me hat le kar ja raha hu work nahi kar raha hai plz solution
Same
Plz bta den ye kitni range s e sense kr skta he
3 feet tak aram se krta hai high sensitivity pe adjust krke
Sir dc motor on/off control project ki working detail me batao na please
Sir. Switch ON karne ke bad bhi Buzzer buj raha hai! Please kya karu bataia
Nice
Ye to obstacle sensir hai machis dikhane ki kya jaroorat.kewal hath hi samne rakh doge to kam karega
Bro. Is circuit ko A.C bulb per kis tra use kr skty hen.
Ap k light projects itny useful ni hen. Because these projects are not regular use as A.C. bulb use.
Ac bulb ko jalane ke liye ek relay wala circuit banana hoga, aur relay ko operate karne ke liye mosfet ya transistor ka use karna hoga, aur mosfet ya transistor ko trigger karne ke liye ir sensor ke jariye signal dena hoga
Sir is it possible for you to make a video to control load like tubelight fan to operate using this IR sensor.
Ir sensor should act as a switch (on / off fan or light ).
If possible please make a video on this.
@@92sarvesh
Yes we can control load by using mobile charger for I.R. sensor.
Can I used 9v battery?
Yes,
Can I reflect it
Can I use 9v hw battery
No
Dono kyou start ho rahi he
Please aap koi solution batao ..IR sensor sunlight mein work nahi karta hai....aap is circuit ko modify kijiye..jo sunlight mein bhi work kare
Ji bilkul, aap tsop ka ir sensor use kar sakte hai, ye dhoop me bhi work karga, jald main iske upar ek video bna doonga
Apni hai channel bodega iska in English language ni hihugal....😅😅😅😅
Sort of confused. The output is high when no object present, yes? Would the buzzer not be on all the time, unless there is a detection?
What is the voltage of battery
Ye ir senser kitne ki melega
Is pir or ir same
this is ir sensor