hey bro! Glad you liked the video, I let the traxxas clutch really put in some work for this video, LOL, right! Still some stuff left to do like get that 3-speed shifting properly. Always something!
thanks bro! Turns out I was missing brake pads this whole time, I just got a set from Kyosho and the brakes are significantly better now. More on this thing soon!! thanks for your support man.
thanks my NITro Brother! Glad to have you here, more on this truck soon!.. Gonna get the 3rd speed to shift and possibly lock the rear end with a spool so I can do some better crawling. Imagine the tons of nitro smoke when im gonna be crawling!!! Sickening!.
hey buddy! Yes, this is one the very few trucks with a real 4 wheel steering system, it was a KYOSHO option part. Not awesome for top speed runs as it's a FLIP FEST, but very good for slow crawling and tight turns. Nothing beats a nitro crawler honestly...
hey bro! Well so FAR it was only a 2-speed. But it's fine. I need to figure out how to tighten the 4WS or lock it up, then we will surely get the 3rd gear to kick in. Nothing broke with the current clutch setup, so I'd say we are good to go..
lol, yes! I still need to adjust the 3-speed, but at least the second gear hit. Also going about 10+ MPH is challenging with the 4Wheel steering setup. Gotta work on it a tad more. Incremental fails you know...
thanks my NITro Brother! Glad to have you here, more on this truck soon!.. Gonna get the 3rd speed to shift and possibly lock the rear diff with a spool.
My main Nitro Man putting out another awesome video 👍 I love Orange and Grey for Colours man this RC looks bad ass. Unless you were going to rock crawl I’d say take the rear steer out, jump off the top turn buckle on that sucker ! Slow motion action great stuff man looked great in the snow, I almost want to play with my RC’s in the snow ❄️ Great stuff brother 👊
hey bro! how you doing! yes, I know you're 100% right about the 4 wheel steering, but when I got it, it was already installed you know. BTW I also have a SPOOL for one of the diffs, to lock one of them up for some great craving action. As you saw the diffs are super open, maybe some tuning would work. Anyways, I need to get the 3rd gear to shift then we can really have a NITRO Gang Party! lol. More soon .
hey dude! what's up! So far I dont think people have had problems with the USA-1 clutch system really. But I would say getting the bearing upgrade for clutch bell is a good idea..
hey my dude! Yes, I'm working on the 4Wheel Steering system and the 3-speed shift right now. That will be the next video.. You can't kill this NITRO!!.
thanks man! still some work left to be done, like getting the 3-speed to shift and the 4WS to not piss me off over 10 MPH, ahah, But it's coming along, incremental gains you know.
@@Drey-R.C ofcourse bro!! I try to respond to all my comments. Its the best way to keep making nitro great again right!! Right now i got covid so feeling pretty miserable, will try to work on some nitros as a distraction.
hey man! how you doing! I have a few great lunch box videos already here on RUclips. Just for you, I promise to show the Lunch Box in the next video, how about that!! Make sure to not miss Monday Night Nitro.
Awesome that you figured it out. By using traxxas fly wheel. When I do these great diagnostic finds. I call them a Frankenstein fix. Lol chain driven flip top and 4 wheel steering -Bad ass my man!
hey man, yes!!! I finally got it running WILD, but I still need to figure out the 4WS handling issues because at these low speeds I can't really tune the 3rd gear properly yet. But that's another thing to work on. More on this truck soon, thanks man!>
what's up bro! Happy Saturday nitro morning to you! Yes, the Sickening annoying kyosho is finally fixed. And all it took was some basic traxxas parts, hahaha, GO FIGURE!!..
hey dude! how you doing!. this makes me very happy, knowing you're getting a t-maxx! A brand that will not PISS YOU OFF, lol. Trust me. I'm here to help when you get it, sometimes a break-in could be tough, if the carb settings are off, SO let me know..
I love that you finally got this running I can't believe you were actually able to use Traxxas parts on a Kyosho So the first part of the slow motion was awesome because there was no music enough said 0
hey dude! I knew you would like he first part of the slow motion, haha!! But I didn't include too much music and it was quite appropriate for a nitro crawler of this nature (linking park - crawling). nothing more appropriate than that, lol. Anyways still more work needs to be done, the 3rd gear needs to shift..
thanks man! Still needs some work to get the 4 wheels steering more centered for higher speeds, but otherwise the engine and drivetrain seems to be fine. Also waiting on the brake pads.
Whats sad is i was on that livestream when some one mentioned something about flywheel or clutch and you shut them down,and then you mention in a weird way"for 2 hours on livestream and noone could figure it out,when everyone was truly trying to help,because you asked..Im not passing judgement but i feel sometimes i see things differently and there is no"i" in team bro,Im glad you figured your fix on your own without anyones help,shows your a true nitro Guru🙏
I said the clutch bell was binding against the flywheel right from the beginning. I told you to remove all the clutch shoes instead of just the one you originally did to rule out that the shoes were binding. Adding shims that are a faction of a mm thick like 0.1mm (not 1mm thick ass washers that you tried) to adjust tolerances (i.e. so the clutch bell doesn't rub against the flywheel or clutch shoe pins.) What Are Metal Shims Used For? We manufacture metal shims of the highest quality, and ship them out to equipment manufacturers around the country. Here are some of the common uses for metal shims: To fill gaps: Whenever there is a gap in materials, a shim can be used to close that gap and make the materials flush or level. Filling gaps is a common use of shims, especially in construction. If parts are subject to wear, filling the gap with a shim will stop wear from occurring. To level objects: If an object is not level, a shim may be driven in between two objects in order to level the area. Shims of wood, plastic, and metal are used for this purpose. To adjust clearance: In many instances of manufacturing, a shim is needed to reduce clearance between two objects. If the level of clearance needs to be adjusted, the shim used will be made in part of foil, which can be removed in layer to adjust clearance between the objects. In commercial construction and manufacturing: Shims are manufactured in large quantities and used for construction purposes as well as manufacturing purposes. With regards to steel and other types of metal shims, the most common uses for these shims are for automobile manufacturing, for the purposes outlined above. In automobile manufacturing: Steel shims are used regularly in the manufacturing of automobile parts. Shims allow for a greater flexibility when it comes to the clearance level of a particular part, such as a valve. You use shims when things aren't right
hey my dude! how you doing! we have made significant discoveries here on the clutch issues. Knowing you can easily just use basic traxxas parts is good to know. Im thinking of another possible upgrade with the HR hot Racing flywheel and 3 shoe alum clutch.
Hey bro its me the Guy with the mt2 g3.0 i saw that you got it running i youst orderd a new engine same brand same model the first one gave up and now After 4 jears i am back in Business 😂
whats up brother! Yes! Who would have though that a basic Traxxas setup would fix all the KYOSHO sickening problems. When I though about it, the TRX 3.3 is a basic pilot shaft motor, all .21 and up engines also use the same pilot shaft design, so it was CAKE to make it happen. Just had to play around a little with the Flywheel nut, had to use the stock KYOSHO nut. Anyway, more on this thing soon, we need to yell 3-speed BABY!>
hey bro! Luckily for us TRAXXAS parts fit without an issue. Since the 3.3 is a pilot shaft engine it's basically identical shaft length to any other 1/8 style big block. That is the main benefit. Another nitro rescued by a TRAXXAS, ahaha.
hey buddy! How you doing! Let me answer your question. The nitro rustler comes with a single speed transmission only, unless you do some high level custom mods it cannot use a 2-speed. I would highly recommend you pick up a nitro with a 2-speed transmission to begin with, it's a much less of a headache. There is a link to some 2-speed nitros in this video.
ahaha! Significantly good idea. They seem to be universal, I would not be surprised if some traxxas parts can be adapted to a BMW, ahaha!!!.. Sickening!!.
Hey Hybrid! I like the Kyosho truck Great multi uses with that little beast that all wheel is awesome in the snow climbing and rock too I imagine!😉 I can't wait to see you adjust the tranny shift point on third gear, great fix on that clutch bell and regular bearings looked good and fun run for just breaking it in at the boardwalk just sickining!😯😉👍📹💯👋👋👋
hey bro! how you doing! thanks for coming to check out this video, I've made lots of progress with it so far, but as you already saw, we still need that 3-speed BABY to shift! Also I have a diff locker - SPOOL ready to go, might put a spool into the back for some SICKENING crawls!! lol. NitroGanag!!!!.
Hey dude! I've tried numerous combination, nothing worked other than swapping in this traxxas flywheel and clutch. My main issue was the terrible clutch bell binding with the old system, the clutch looked to be original and in good shape though. Since the traxxas clutch is a smaller diameter it seems to be running significantly better, plus I used regular bearings not the roller bearing supplied by Kyosho. Problem solved.
It's the live that I missed otherwise I would have told you to use different clutch pads made of composite instead of aluminum I was thinking of the savage model but it looks like it all works Find now super sikening
hey bro! I was actually trying to order the Savage teflon clutch setup before I settled on the Traxxas setup. The problem is the HPI clutch is sold out everywhere. So impossible to get. I settled on what I had. AT this point my other option is to get the 20 dollar Hot Racing Flywheels and alum clutch they make for the 3.3 model. What do you think?
Like I mentioned in your live video comment s section, I think you needed new shoes and springs. I personally wouldn't run those Traxxas shoes but the point here is that the fix actually works. People were too caught up on mesh and I guess they had blinders on because everything was fine you you built the clutch but things got out of whack as soon as you powered the engine. Anyway, I'm glad it's working and I keeping thinking about your dog. I'm hoping he gets better but I also understand he's an old dog, whatever you decide, be at peace and I hope you can move forward.
FOxx love mine. Dude, did you eat paint chips as a kid? Gears are plastic. Chain drive but lets put some plastic gears in there for durability LMAO. Get the steel ones from eBay. You will thank me.
Can i spell L E M O N that is what Kyosho did with all of their new affordable trucks . Even the new f09 on road is bad they look amazingly good on the shelf but a waste of money. The only good KYOSHO right now are mp9 rtr mp10 kit and gt3 kit sadly all 1000$ usd The new reality of nitro rc. RTR no longer worth the dough compared to their electric counter part. But when you build a kit and buy a 450-700$ nitro engine NOW THIS IS WHERE IT'S AT untouchable. But too pricey.
@RcLoko exactly but sadly for many RTR is the end game.... kinda sucks in the old days with lower tech it felt like rtr were advanced tech for the money spent now it's like a bundle of 25 yr old tech with no gains at a higher price
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
the Kyosho foxx is awesome!
I just found one local for $300!
Goin to pick it up later today!💯🔥
Gotta love the smell of nitro in the morning! Please make another baja video, I am getting a baja and would love to see more of the gassers please.
nitro_fever nice to be able to jump over the curb 👍 and the snow is nice too.
hey bro! Glad you liked the video, I let the traxxas clutch really put in some work for this video, LOL, right! Still some stuff left to do like get that 3-speed shifting properly. Always something!
Badass
thanks bro! Turns out I was missing brake pads this whole time, I just got a set from Kyosho and the brakes are significantly better now. More on this thing soon!! thanks for your support man.
Sickening the legend Foxx!
Loved watching you sorting this Bad Kyosho out my man. Want to hear that 3 speed Babeeeeee💪💪
thanks my NITro Brother! Glad to have you here, more on this truck soon!.. Gonna get the 3rd speed to shift and possibly lock the rear end with a spool so I can do some better crawling. Imagine the tons of nitro smoke when im gonna be crawling!!! Sickening!.
4 wheel steering wow
hey buddy! Yes, this is one the very few trucks with a real 4 wheel steering system, it was a KYOSHO option part. Not awesome for top speed runs as it's a FLIP FEST, but very good for slow crawling and tight turns. Nothing beats a nitro crawler honestly...
3 speed baby!
hey bro! Well so FAR it was only a 2-speed. But it's fine. I need to figure out how to tighten the 4WS or lock it up, then we will surely get the 3rd gear to kick in. Nothing broke with the current clutch setup, so I'd say we are good to go..
3 speed baby!!!! Not quite
lol, yes! I still need to adjust the 3-speed, but at least the second gear hit. Also going about 10+ MPH is challenging with the 4Wheel steering setup. Gotta work on it a tad more. Incremental fails you know...
That's a nice looking truck. Good job!👊
thanks my NITro Brother! Glad to have you here, more on this truck soon!.. Gonna get the 3rd speed to shift and possibly lock the rear diff with a spool.
My main Nitro Man putting out another awesome video 👍 I love Orange and Grey for Colours man this RC looks bad ass.
Unless you were going to rock crawl I’d say take the rear steer out, jump off the top turn buckle on that sucker !
Slow motion action great stuff man looked great in the snow, I almost want to play with my RC’s in the snow ❄️
Great stuff brother 👊
hey bro! how you doing! yes, I know you're 100% right about the 4 wheel steering, but when I got it, it was already installed you know. BTW I also have a SPOOL for one of the diffs, to lock one of them up for some great craving action. As you saw the diffs are super open, maybe some tuning would work. Anyways, I need to get the 3rd gear to shift then we can really have a NITRO Gang Party! lol. More soon .
@@hybrid32494 sweet once it hits the 3 speed she should scream 🧨
Nitro gang active dude
hey my dude! yup! we are always 100% active, working on nitros at all times. And no SLEEP TILL NITRO! that was the case o this kyosho, lol.
Thanks for the idea. If I have the same problems with my USA1 I am going to use it.
hey dude! what's up! So far I dont think people have had problems with the USA-1 clutch system really. But I would say getting the bearing upgrade for clutch bell is a good idea..
Nice can't wait for 3 speed video and great videos 👍
hey my dude! Yes, I'm working on the 4Wheel Steering system and the 3-speed shift right now. That will be the next video.. You can't kill this NITRO!!.
Just bad ass!
thanks man! still some work left to be done, like getting the 3-speed to shift and the 4WS to not piss me off over 10 MPH, ahah, But it's coming along, incremental gains you know.
I love this car I really wanna get one
hey my dude! Unfortunately this model is discontinued, but the new Kyosho USA-1 is very similar in drivetrain to this, almost identical.
@@hybrid32494 Thanks for the reply I really a appreciate it. That’s most likely what I’ll do. Thanks for making great nitro content!
@@Drey-R.C ofcourse bro!! I try to respond to all my comments. Its the best way to keep making nitro great again right!! Right now i got covid so feeling pretty miserable, will try to work on some nitros as a distraction.
Nice, sic looking car. Must get one!!!!
Nice work Bro. Still want to see that Lunch Box.😁
hey man! how you doing! I have a few great lunch box videos already here on RUclips. Just for you, I promise to show the Lunch Box in the next video, how about that!! Make sure to not miss Monday Night Nitro.
The Foxx lives! Great video!
so cool!!!
Hell yeah!
thanks bro! Glad to have you here.
3 speed baby
You should take the temp on the glowplug not the cooling head.
Awesome that you figured it out. By using traxxas fly wheel. When I do these great diagnostic finds. I call them a Frankenstein fix. Lol chain driven flip top and 4 wheel steering -Bad ass my man!
Really glad you got it working. Such a mean looking truck.
hey man, yes!!! I finally got it running WILD, but I still need to figure out the 4WS handling issues because at these low speeds I can't really tune the 3rd gear properly yet. But that's another thing to work on. More on this truck soon, thanks man!>
❤🎉😮😊ไฟไฟแอด
Man I love the look and design of that thing! 3 speed baby!
Those on board shots are so smooth! Is that the new GoPro?
hey bro! Nope, that is just my basic Go Pro hero 8. I have not yet begun using the Hero 10 I purchased recently. need to set the thing up.
LOOKS AWESOME...GREAT JOB 👍💪
thanks bro! It's been a long journey with this truck, started out with nothing, and now I'm yelling 2-speed baby! But soon it will be 3SPEED BABY!>.
Awesome job brother, it's been a long time coming and now it's finally here
what's up bro! Happy Saturday nitro morning to you! Yes, the Sickening annoying kyosho is finally fixed. And all it took was some basic traxxas parts, hahaha, GO FIGURE!!..
wow,cool fix and run,waiting on my first nitro,ordered me the t max classic,watched your video of the t max and always wanted one
hey dude! how you doing!. this makes me very happy, knowing you're getting a t-maxx! A brand that will not PISS YOU OFF, lol. Trust me. I'm here to help when you get it, sometimes a break-in could be tough, if the carb settings are off, SO let me know..
Epic this dude has chosen the right choice in life NITRO GANG lol
ahaha! thank you my dude! I am glad you have seen the Nitro Gang lifestyle and approve!!! 100% 👍🏻
I love that you finally got this running
I can't believe you were actually able to use Traxxas parts on a Kyosho
So the first part of the slow motion was awesome because there was no music enough said 0
hey dude! I knew you would like he first part of the slow motion, haha!! But I didn't include too much music and it was quite appropriate for a nitro crawler of this nature (linking park - crawling). nothing more appropriate than that, lol. Anyways still more work needs to be done, the 3rd gear needs to shift..
Always fun to watch when you run your nitros.
hey Marion! Always happy to have you here, thanks for wathcing and your support!
I knew you could do it. Sounds great bro. Hitting that three speed baby.
thanks man! Still needs some work to get the 4 wheels steering more centered for higher speeds, but otherwise the engine and drivetrain seems to be fine. Also waiting on the brake pads.
Whats sad is i was on that livestream when some one mentioned something about flywheel or clutch and you shut them down,and then you mention in a weird way"for 2 hours on livestream and noone could figure it out,when everyone was truly trying to help,because you asked..Im not passing judgement but i feel sometimes i see things differently and there is no"i" in team bro,Im glad you figured your fix on your own without anyones help,shows your a true nitro Guru🙏
I said the clutch bell was binding against the flywheel right from the beginning. I told you to remove all the clutch shoes instead of just the one you originally did to rule out that the shoes were binding. Adding shims that are a faction of a mm thick like 0.1mm (not 1mm thick ass washers that you tried) to adjust tolerances (i.e. so the clutch bell doesn't rub against the flywheel or clutch shoe pins.)
What Are Metal Shims Used For?
We manufacture metal shims of the highest quality, and ship them out to equipment manufacturers around the country. Here are some of the common uses for metal shims:
To fill gaps: Whenever there is a gap in materials, a shim can be used to close that gap and make the materials flush or level. Filling gaps is a common use of shims, especially in construction. If parts are subject to wear, filling the gap with a shim will stop wear from occurring.
To level objects: If an object is not level, a shim may be driven in between two objects in order to level the area. Shims of wood, plastic, and metal are used for this purpose.
To adjust clearance: In many instances of manufacturing, a shim is needed to reduce clearance between two objects. If the level of clearance needs to be adjusted, the shim used will be made in part of foil, which can be removed in layer to adjust clearance between the objects.
In commercial construction and manufacturing: Shims are manufactured in large quantities and used for construction purposes as well as manufacturing purposes. With regards to steel and other types of metal shims, the most common uses for these shims are for automobile manufacturing, for the purposes outlined above.
In automobile manufacturing: Steel shims are used regularly in the manufacturing of automobile parts. Shims allow for a greater flexibility when it comes to the clearance level of a particular part, such as a valve.
You use shims when things aren't right
Awesome man. That's good to know about the clutches so when mine starts to go bad that's a nice Upgrade
hey my dude! how you doing! we have made significant discoveries here on the clutch issues. Knowing you can easily just use basic traxxas parts is good to know. Im thinking of another possible upgrade with the HR hot Racing flywheel and 3 shoe alum clutch.
✌️😛✌️👍Yo!
thanks for watching bro!!>.
Hey bro its me the Guy with the mt2 g3.0 i saw that you got it running i youst orderd a new engine same brand same model the first one gave up and now After 4 jears i am back in Business 😂
hey dude! how you doing! Welcome back to bring nitro! You referring to the hpi G3.0 motor yes? Formthe nitro MT2, love that thing!.
Yes of corse
Bro way to beat the system... hate when rc parts wont interchange.
whats up brother! Yes! Who would have though that a basic Traxxas setup would fix all the KYOSHO sickening problems. When I though about it, the TRX 3.3 is a basic pilot shaft motor, all .21 and up engines also use the same pilot shaft design, so it was CAKE to make it happen. Just had to play around a little with the Flywheel nut, had to use the stock KYOSHO nut. Anyway, more on this thing soon, we need to yell 3-speed BABY!>
i said to use a different flywheel as it had one of those cheap china ones on it and they alwyas give issues
Putting on traxxas clutch. Now it sounds like a traxxas. Lol
Lol, yes but at least it runs reliably now. Right!! Hsha. More traxxas parts may be comming sooon. Im serious, maybe its a good thing?? Lol
Idk how you got the Traxxas parts to fit but that’s great I thought that small block parts wouldn’t work for big blocks lol
hey bro! Luckily for us TRAXXAS parts fit without an issue. Since the 3.3 is a pilot shaft engine it's basically identical shaft length to any other 1/8 style big block. That is the main benefit. Another nitro rescued by a TRAXXAS, ahaha.
One question do I need 3.3 for 2 speed or with my 2.5 rustler can i do it?
hey buddy! How you doing! Let me answer your question. The nitro rustler comes with a single speed transmission only, unless you do some high level custom mods it cannot use a 2-speed. I would highly recommend you pick up a nitro with a 2-speed transmission to begin with, it's a much less of a headache. There is a link to some 2-speed nitros in this video.
Ill be fixing my bmw with traxxas parts. 🤣
ahaha! Significantly good idea. They seem to be universal, I would not be surprised if some traxxas parts can be adapted to a BMW, ahaha!!!.. Sickening!!.
Really enjoyed the 4WS and the way the little wheelie bar wheel at the back kept rotating when idling! Kyosho GTPYO = Guaranteed to **** you off
ahah, hey bro! The GTPYO Kyosho is finally running, still some stuff left to do, but it's better than where I started.
Bro more importantly how long are we going to let kyosho to keep putting a different body and tires on the same old chassis!!!
Have you fixed the front steering recurring issue? If so how?
How long has this model been released? Very cool man!
Hey Hybrid! I like the Kyosho truck Great multi uses with that little beast that all wheel is awesome in the snow climbing and rock too I imagine!😉 I can't wait to see you adjust the tranny shift point on third gear, great fix on that clutch bell and regular bearings looked good and fun run for just breaking it in at the boardwalk just sickining!😯😉👍📹💯👋👋👋
hey bro! how you doing! thanks for coming to check out this video, I've made lots of progress with it so far, but as you already saw, we still need that 3-speed BABY to shift! Also I have a diff locker - SPOOL ready to go, might put a spool into the back for some SICKENING crawls!! lol. NitroGanag!!!!.
Did you try a smaller shim on the other flywheel though?
Hey dude! I've tried numerous combination, nothing worked other than swapping in this traxxas flywheel and clutch. My main issue was the terrible clutch bell binding with the old system, the clutch looked to be original and in good shape though. Since the traxxas clutch is a smaller diameter it seems to be running significantly better, plus I used regular bearings not the roller bearing supplied by Kyosho. Problem solved.
Did you make that 4 wheel steering or now comes with it? Mine does not have it !
It's the live that I missed otherwise I would have told you to use different clutch pads made of composite instead of aluminum I was thinking of the savage model but it looks like it all works Find now super sikening
hey bro! I was actually trying to order the Savage teflon clutch setup before I settled on the Traxxas setup. The problem is the HPI clutch is sold out everywhere. So impossible to get. I settled on what I had. AT this point my other option is to get the 20 dollar Hot Racing Flywheels and alum clutch they make for the 3.3 model. What do you think?
Like I mentioned in your live video comment s section, I think you needed new shoes and springs. I personally wouldn't run those Traxxas shoes but the point here is that the fix actually works. People were too caught up on mesh and I guess they had blinders on because everything was fine you you built the clutch but things got out of whack as soon as you powered the engine. Anyway, I'm glad it's working and I keeping thinking about your dog. I'm hoping he gets better but I also understand he's an old dog, whatever you decide, be at peace and I hope you can move forward.
Is that your Prius?
hey buddy! Yes! I love the prius, same me so much money on fuel that I can buy lots of nitros! ahah .
#crawlerfreezone
FOxx love mine. Dude, did you eat paint chips as a kid? Gears are plastic. Chain drive but lets put some plastic gears in there for durability LMAO. Get the steel ones from eBay. You will thank me.
Can i spell L E M O N that is what Kyosho did with all of their new affordable trucks . Even the new f09 on road is bad they look amazingly good on the shelf but a waste of money. The only good KYOSHO right now are mp9 rtr mp10 kit and gt3 kit sadly all 1000$ usd The new reality of nitro rc. RTR no longer worth the dough compared to their electric counter part. But when you build a kit and buy a 450-700$ nitro engine NOW THIS IS WHERE IT'S AT untouchable. But too pricey.
@RcLoko exactly but sadly for many RTR is the end game.... kinda sucks in the old days with lower tech it felt like rtr were advanced tech for the money spent now it's like a bundle of 25 yr old tech with no gains at a higher price
CRAWLER FREE ZONE---Fool
nah fooool, that does not include NITRO crawlers. All nitros are welcome on this channel fool....