Yamaha Grizzly 125 or Breeze 125 Transmission Fix
HTML-код
- Опубликовано: 26 авг 2024
- Had a clicking in the transmission of this 06 Yamaha Grizzly 125. I show you how I fixed it, how to put it back together and what to look out for in the motor and transmission. Hope this video helps!
I believe Yamaha used this engine in the following models:
1989 Breeze 125
1990 Breeze 125
1991 Breeze 125
1992 Breeze 125
1993 Breeze 125
1994 Breeze 125
1995 Breeze 125
1996 Breeze 125
1997 Breeze 125
1998 Breeze 125
1999 Breeze 125
2000 Breeze 125
2001 Breeze 125
2002 Breeze 125
2003 Breeze 125
2004 Breeze 125
2004 Grizzly 125
2005 Grizzly 125
2006 Grizzly 125
2007 Grizzly 125
2008 Grizzly 125
2009 Grizzly 125
2010 Grizzly 125
2011 Grizzly 125
2012 Grizzly 125
2013 Grizzly 125
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video](http://i.ytimg.com/vi/zxfEiMksZQs/mqdefault.jpg)
Great video , but is totally removing the motor top necessary , can we only pull up the cylinder slightly without getting the piston off and then remove the case, as i know when removing the piston we will be obliged to change rings otherwise we will have smoke
I had the same thought but if it was running good before you really dont have to change the rings. This is a small engine and much less forces at play than in bigger engines. And if you were to leave the cylinder half removed on the top it would be a nightmare doing everything else and balancing the case. Just not worth it.
Great video, thanks. You have a new subscriber! More videos on the grizzly/breeze 125 would be most welcome 😊
I usually cut off the gearbox and put a Honda 50 cc gearbox on the engine with a v-belt
Yo tengo una y la pare porque no avanzaba donde puedo conseguir los engranes y todas las piezas de la caja junto con el kit de cilindro y poston?
Any idea as to why the tooth just sheared off like that? Abuse or normal use? Was the fluid in good shape? Thanks for the video?
My guess is that bc it's a wheeler meant for kids that they generally don't really know how to ride and they just keep slamming it into F or R while still rolling. The fluid looked fine and I found the whole tooth broken clean off in the bottom of the case.
Mine is jumping on gears what could it be HELP PLZ!!!
Jumping on gears?
I bought one today not running, got it running and front sprocket is locked up. Any ideas ? Kinda figuring I’m going to have to do this. Lol
No clue you just gotta get in there and see!
Would that ball bearing not being im cause grinding? I pulled my breeze apart because reverse was grinding. Split the cases that bearing was sitting out. Don't know if it came out splitting the case but every tooth on every gear is spotless I was expecting shavings or something but the only thing I see out of place was that. It seemed as if it was in gear as it didn't pop out lever was smooth everytime going into reverse or forward.
That ball bearing missing would not cause any grinding. It just provides some resistance on the shifter so it's not flopping around. Take your gears out and thoroughly inspect everything
@jimmyzdano I checked better found a nick in the shaft from clutch, and play in the bearing. Thinking it played ping pong. Time for parts.
How long did it take to fix and how much money did you put in to it ?
$130 bucks for the main axle. It doesn't take too long maybe 4 hours if everything goes smooth. but it never does so count on a couple days plus you have to find whats wrong first then order the part