Hey, Thanks for the Feedback. I First added a new rotated volume to the upper mold part and the used a boolean operation to subtract this from the outer mold Part. Maybe check ruclips.net/video/hbYfjwLiHh0/видео.html These Kind of operations are very helpful from Time to Time.
Am I misunderstanding something here? I think the bottom of the mold needs to be open, right? Otherwise it is not possible to pour something in, I think this is a missing step here.
when you click combine to cut both of the bodies how do you prevent one from disappearing because everytime i cut i am left with one bofy only and cannot move the center out of the way
Hi there! Thank you very much for your tutorial, was really useful! I followed it and I even 3d printed it! But it gets a little bit hard to pull out when the concrete is dry, actually my mold broke :( Do you think it would be easier to unmold if the parts are divided into 3 instead of 4 and with diagonal cuts as Alexandre does? How would you do it? I'm very new to 360 fusion and I don't really know how to divide a cylinder into 3 with diagonal cuts! Thanks! :)
@@cadprocess3784 Hey Thanks! I actually find this Emboss tool and use it to divide the cylinder into 3, worked perfectly! I'm already printing molds that work good for me. Thanks again for your tutorial! :)
It's just impossinble to follow to this tutorial as for a newbie. You did not comment the most part of what you are doing and increased the video speed so that it is just impossible to follow you and I had to pause each step and rewatch it like 5-10 times to understand what you are clicking there. And you talk like you had no sleep. It's just a torment and not a tutorial for a new user.
Wonderfully ,from Brazil. I am interested. Can you send me the files?Ii'll starting in Flowers vases sellers on street. It's possible selling on street in Brazil.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Thank you for this tutorial!! Really helped me with a doubt about how to do what is in 5:33 - keep doing!
Hey,
Thanks for the Feedback.
I First added a new rotated volume to the upper mold part and the used a boolean operation to subtract this from the outer mold Part.
Maybe check ruclips.net/video/hbYfjwLiHh0/видео.html
These Kind of operations are very helpful from Time to Time.
Am I misunderstanding something here?
I think the bottom of the mold needs to be open, right?
Otherwise it is not possible to pour something in, I think this is a missing step here.
when you click combine to cut both of the bodies how do you prevent one from disappearing because everytime i cut i am left with one bofy only and cannot move the center out of the way
Wow this is the first tutorial ive seen in fusion 360 mold making, well done! 😊
Thank you.
I hope you picked up something for your own workflow from it! :)
@@cadprocess3784 tip for future. Don´t speed up the videos and if you want to be "great", then explain all of the steps you are doing.
Whats the software name?
How can I do this with an in even opening for the pot? It has a downward slope so the pot is symmetrical
Amezing
Hi there! Thank you very much for your tutorial, was really useful! I followed it and I even 3d printed it! But it gets a little bit hard to pull out when the concrete is dry, actually my mold broke :( Do you think it would be easier to unmold if the parts are divided into 3 instead of 4 and with diagonal cuts as Alexandre does? How would you do it? I'm very new to 360 fusion and I don't really know how to divide a cylinder into 3 with diagonal cuts! Thanks! :)
You Need to draw a cylinfer insted of the square and divide in by 3 with an angle of 60 degree. Then every step should be the same
@@cadprocess3784 Hey Thanks! I actually find this Emboss tool and use it to divide the cylinder into 3, worked perfectly! I'm already printing molds that work good for me. Thanks again for your tutorial! :)
Fantastik tank by italy
You are Welcome neighbour !
Can we have the file?
Betonu nerden dökcen lol
It's just impossinble to follow to this tutorial as for a newbie. You did not comment the most part of what you are doing and increased the video speed so that it is just impossible to follow you and I had to pause each step and rewatch it like 5-10 times to understand what you are clicking there. And you talk like you had no sleep. It's just a torment and not a tutorial for a new user.
Wonderfully ,from Brazil. I am interested. Can you send me the files?Ii'll starting in Flowers vases sellers on street. It's possible selling on street in Brazil.
Jo Bricia, Share your Mail with me so I will send you the files.
It feels like there is good information here but I can't understand a fucking thing you're saying.
Hey would you create a mold for me I’ll pay you of-cause. Would be happy to hear from you
Clara
terribly explained for a beginner
Whit the speed you explain let me tell you is NOT easy to follow you!
the video is so slow speed it up :D
Just use the time multiply funktion then :D