@@quickkits I second Ednitram's comment. I'm 61, and your videos are inspiring my return to the hobby. Young man, you are helping many, even tough you are currently taking a break. We will all break open the champagne when you return. Until then, keep safe and well.
Generic Asian #68301648 use some spare sprue and heat it up over a candle and pull either end away from each other and it will draw out a wire from the plastic
For anybody who loves painting tanks and aircraft. If you handpaint, get your self a tube or 2 of Vallejo Steel 71.065. This not only works as a primer but has turned all my tanks to looking like plastic to actually appearing as kits made of steel. It seals well and doesn't distort any colours you paint over it. I use noting but Vallejo and Tamiya acrylics and they make my models look fantastically realistic.
@@andrewoconnor5108 71.065 Is the code of the paint. My current project the Tamiya Sherman M4A3E8 when sitting in this paint looks metal NOT plastic. it's a great paint to use throughout build as it adds realism to your tanks but also helps any paints over it hold on better. I hope this tip works well for you and you need only to lightly apply it. Let me know how it goes and i look forward to hearing about it.
Fantastic advice there! For rigging I use either stretched spruce or invisible thread, superglued into place & tied if needed. I’d love to try EZline though, as it flies well and is elastic ☺️
Great advice Owen! For my own models I have used Citadel Washes and Techinical paint which are acrylic base and work quite well. On my last kit I used a water soluble artist oil paint. It can be thinned with water and before it dries it can be cleaned up with a Q tip or cotton bud dampened in water. Good luck with the job and thanks for sharing these tips.
Owen I walked past a model store when I was 15 yrs old (1975). A model kit caught my eye. It was the original Airfix picture of Lancaster landing with one of the engines on fire. i went wow. I've got the original picture but not the model having moved too often. I have Lancaster model that needs some refurbishment.
Stuff I've learned from Owen (abridged)... using pastels and chalk for weathering, chipping techniques, how to get more details brought out, wash your parts before you build, how thin should your paints be, the list goes on and on - I never start a new build without reviewing my collection of Quick Kits vids. Thanks so much!
0:52 i dont know where i saw it, but it works decently for me so far, is picking a piece of the sprue itself and heating it with a lighter and when its starts to be flexible pull it out, this should give you a decently thin (altho maybe a bit thick for some peoples liking) wire
you could also warm up a part of the left over plastic and pull it on each end apart to make a very thin plastic string. You can also find it on RUclips. Good Luck!
I can confirm, 'EZ line' is awesome if you can get ahold it Also not sure what Tamiya accent liner is made from 100%, but odorless thinners DO wipe it clean as if it were an oil wash. So use those varnishes to protect your base coats! /// Awesome little session here Owen!
Also, artists oils are all around fantastic for all-things-weathering. Washes, fading, highlighting and creating dirt effects.. and very forgiving since they have such a long drying time. Anyone who reads this, experiment with oils on your models!
For scale wires I find the best option is old guitar stings, you have a good variety of sizes and you should be able to get them for free from your local music shop, just go in and ask for some broken stings and they will be more than happy to give you as many as you want
Thanks for your videos Owen. Really enjoy them. You have a unique point of view on modelling, which is really refreshing to see on RUclips. Keep the videos coming. 👍
what model brand do you think is better at planes (Tamiya, Airfix, Revell, etc.) and what model brand do you think is better at tanks (Tamiya, Revell, Dragon, Airfix etc.) I personally prefer tamiya for tanks and infantry because its not too expensive and its good quality and i personally prefer airfix for planes because they're easy and not too expensive
For the models where weathering is avoided (regardless of individual preference) there's always the planes used by aerobatic display teams like the Red Arrows. Though I suppose trying to replicate the immaculate gloss finish maintained on those hawks could be seen as a weathering challenge in itself...
Totally agree with Model Minutes. I always get the best results with multiple thin coats and not overloading the brush ('stretching the paint'). This will give you a fairly brush stroke free finish. You can get a good silver or aluminium finish this way I've found.
Hey Owen, I know you won't see this but i built a 1:72 scale fokker eindekker and upon applying the decals, the fusalage decals are peeling off with almost no effort. Quite irratating. I've heard off applying clear nail polish but I'm reluctant to as I'm quite happy with the finish and don't want to ruin it. Please help
When should I use (Enamel) Varnish? Unless your model has a dark base colour, you want to look slightly browned or dirty with age or is going to be exhibited in a very dark place, NEVER!!!! Use Matt, Gloss or Satin Cote instead; You can also make washes out of the Humbrol Cotes. Same for Humbrol Decal Fix (use Micro set/sol instead). Also, Revel & Tamiya 'do' make far better metallic colours and I personally only ever use Tamiya for clear colours.
Greetings from Australia! G'day Owen, Would love to share that you were my inspiration to paint tanks by hand. Although I can professionally airbrush there's just something about hand painting. One of my favourite videos on your channel that helped me weather tanks was your Sherman Firefly. My question for you is, Do you enjoy building and comparing the differences in detail of US tanks modified for the British? For example the M10 Wolverine became the Achilles.
Hi Owen, greetings from Serbia. I like the way how you have made a suggestions, and also answers with the model kit, painting, etc. However, I wonder one thing: Where can I send you questions about models, decals, etc.? I have no idea, that's why I'm asking. This is my third video that I have watched, and I'm also interested in learning new technique of model kits. Some of the techniques that I have seen I'm also using, before I have subscribed to your channel, and also without knowing your channel. Looking forward to see the answers to other questions, and also on mine question/questions as well (I hope). Keep it up, and don't give up.
I have been collecting die-cast commercial aircraft for a long time with over 160 models and just brought my first 1:72 military aircraft scale kits. What would you recommend to someone who is a beginner like me?
My dad got me into modelling when I was really young, I’ve started building them again now and I’m about to build a WW1 heavy bomber biplane Vickers Vimy
Hi - What do you recommend as the best matt varnish that you can apply with a brush, over the finished model (ie over the top of the entire model and finished decals)
Hi Owen I managed to make the Bismarck it was really hard but the out come of my ship look pretty good I wish I could show you a picture of my ship I haven't finished painting it yet so.
I've never used Humbrol acrylics, but I love those Revell Aqua paints. they barely make any brushstrokes if thinned properly and when I use drying retarder you would think I'm using enamel paints :D The only problems that I had were with Revell Aqua 56 Blau, it seemed as if there wasn't enough pigment in them, they created these streaks of blue colour. Had to apply a lot of layers to make an even finish. Also I can't seem to thin some of the gloss paints with water, so I need to use alcohol. I'm glad you are back. Do you have any model kit to build for a video?
@@quickkits After a life time of using Humbrol enamels and acrylics, I've just taken the move over to Vallejo Model Color. Really pleased with the results. Getting a brush stroke free finish - and an air brush look. Have to experiment with the colour matches though, but worth it.
My favorite part is assembling the model, at first you have that skeleton of the tank; then as you go further and further you get to see that famous or beautiful look of a tank or a plane and it just gets you (at least me) more hyped to make it good as possible.
Has to be the most attractive modeler on the Tube!
Allessio777 hell yeah
Aw man I'm blushing
Owen, you have been inspirational on my return to the hobby after almost 30 years away. Thank you!
You're very welcome ❤️ I'm glad you're enjoying the hobby again
@@quickkits I second Ednitram's comment. I'm 61, and your videos are inspiring my return to the hobby. Young man, you are helping many, even tough you are currently taking a break.
We will all break open the champagne when you return. Until then, keep safe and well.
I use Stretched sprue to make the wires.
Generic Asian #68301648 use some spare sprue and heat it up over a candle and pull either end away from each other and it will draw out a wire from the plastic
yeah it works well!
For anybody who loves painting tanks and aircraft. If you handpaint, get your self a tube or 2 of Vallejo Steel 71.065. This not only works as a primer but has turned all my tanks to looking like plastic to actually appearing as kits made of steel. It seals well and doesn't distort any colours you paint over it. I use noting but Vallejo and Tamiya acrylics and they make my models look fantastically realistic.
Thanks for the tip! Will order this and try it out.
@@andrewoconnor5108 71.065 Is the code of the paint. My current project the Tamiya Sherman M4A3E8 when sitting in this paint looks metal NOT plastic. it's a great paint to use throughout build as it adds realism to your tanks but also helps any paints over it hold on better.
I hope this tip works well for you and you need only to lightly apply it. Let me know how it goes and i look forward to hearing about it.
Fantastic advice there! For rigging I use either stretched spruce or invisible thread, superglued into place & tied if needed. I’d love to try EZline though, as it flies well and is elastic ☺️
Last time i watched you was 4-5 years when i was 10, and then I saw you again and Ive started making them again!
Watching your videos have inspired me to start scale modeling
I recommend the wires for rigging or for WWI planes from "Uschi van der Rosten". They are flexible. So it is easier to glue them under tension b
Please do another collection video because your collection has grown
I like your philosophy of putting fun first in modelling.
Glad to see you back man! your tips helped me a lot recently, cheers.
Welcome back Owen! I always enjoyed your build videos, getting back into the hobby after a 35 year layoff. Ypur key point. Make sure your having fun.
Great advice Owen! For my own models I have used Citadel Washes and Techinical paint which are acrylic base and work quite well. On my last kit I used a water soluble artist oil paint. It can be thinned with water and before it dries it can be cleaned up with a Q tip or cotton bud dampened in water. Good luck with the job and thanks for sharing these tips.
Great video you really inspire me to make models! I’m so glad that your back!! Keep it up.
Thank you! And you too dude :)
Owen I walked past a model store when I was 15 yrs old (1975). A model kit caught my eye. It was the original Airfix picture of Lancaster landing with one of the engines on fire. i went wow. I've got the original picture but not the model having moved too often. I have Lancaster model that needs some refurbishment.
for the guide wire, i used thin fishing line, with just a dot of glue on each end and it worked out just fine.
Stuff I've learned from Owen (abridged)... using pastels and chalk for weathering, chipping techniques, how to get more details brought out, wash your parts before you build, how thin should your paints be, the list goes on and on - I never start a new build without reviewing my collection of Quick Kits vids. Thanks so much!
That means a lot dude ❤️❤️ glad to have been of help
@@quickkits Oh, and lest we forget... the magic of Q-Tips!
0:52 i dont know where i saw it, but it works decently for me so far, is picking a piece of the sprue itself and heating it with a lighter and when its starts to be flexible pull it out, this should give you a decently thin (altho maybe a bit thick for some peoples liking) wire
Niels van de Wetering thanks a ton o
Was it my video any chance? 😂
One word of caution... DON'T use a candle to heat the sprue! You'll run the risk of getting soot baked into the plastic.
1:19 was my question thanks for answering
you could also warm up a part of the left over plastic and pull it on each end apart to make a very thin plastic string. You can also find it on RUclips. Good Luck!
You're very welcome I hope it helps!
I used cotton thread on my scharnhorst, fishing line painted black on my bismarck and spitfire, I think they look fine
I am a bit late but for the rigging on scale models, I use elastic sewing thread. I learned to use it from the guys I display with
For guide wires, I use either fishing line or just cotton, depending on scale, with a dab of super glue, turns out good enough for me :)
Stretch some sprue over a candle to make the guide-wires?
To make the wires, hold a piece of sprue above a candle for a few seconds and then stretch it
I can confirm, 'EZ line' is awesome if you can get ahold it
Also not sure what Tamiya accent liner is made from 100%, but odorless thinners DO wipe it clean as if it were an oil wash. So use those varnishes to protect your base coats!
///
Awesome little session here Owen!
Thanks for the tips and feedback :)
I think the Red Arrow planes are the best to not weather because although they are used a lot, I would always imagine them to be perfect.
For the guide wires .I use an old usb cable and strip out the fine wires inside they sick easy with super glue and are super fine and very long .
Also, artists oils are all around fantastic for all-things-weathering. Washes, fading, highlighting and creating dirt effects.. and very forgiving since they have such a long drying time.
Anyone who reads this, experiment with oils on your models!
^ I second this
Hi Owen I’m Owen too!
Always thought it was a name which very little people have, but seems not.
the one guy from jurrassic park 2 is named owen too i think
Yeah that surprised me too. 😂
i use scotch brite to really smooth down sanded area's, worked great so far
For scale wires I find the best option is old guitar stings, you have a good variety of sizes and you should be able to get them for free from your local music shop, just go in and ask for some broken stings and they will be more than happy to give you as many as you want
Thank you for all your advice , it really helped me, I appreciate it
Thanks for your videos Owen. Really enjoy them. You have a unique point of view on modelling, which is really refreshing to see on RUclips. Keep the videos coming. 👍
Thanks dude that means a lot ❤️
where can you buy the poster behind you?
what model brand do you think is better at planes (Tamiya, Airfix, Revell, etc.)
and what model brand do you think is better at tanks (Tamiya, Revell, Dragon, Airfix etc.)
I personally prefer tamiya for tanks and infantry because its not too expensive and its good quality
and i personally prefer airfix for planes because they're easy and not too expensive
Uschi van der Rosten and also Mig do rigging as well as EZ Lines...
Why you don't paint with an Airbrush?
For the models where weathering is avoided (regardless of individual preference) there's always the planes used by aerobatic display teams like the Red Arrows. Though I suppose trying to replicate the immaculate gloss finish maintained on those hawks could be seen as a weathering challenge in itself...
Could u build an icm spitfire ‘beer delivery ‘ please I’m just getting into plane models normally building tanks and jeeps
3:41 ;-) Sweet memories! Keep it up mate 👍
Have u done a Lancaster bomber build if u haven’t pls can u do 1!?
As a fisher as well I recommend 2lb monofilament fishing line which is cheap
I've been experimenting with silver paint and always i get those ugly brush strokes. Can you give any suggestions?
Plastish_Model are you dry brushing?
Not so much as just painting the models silver like the P-51
Plastish_Model ah, sounds like you might need to thin your paint
Totally agree with Model Minutes. I always get the best results with multiple thin coats and not overloading the brush ('stretching the paint'). This will give you a fairly brush stroke free finish. You can get a good silver or aluminium finish this way I've found.
Excellent knowledge.
Could you use clear nail varnish for decals?
Using fishing strings is a great alternative to hair extensions
Hey Owen, I know you won't see this but i built a 1:72 scale fokker eindekker and upon applying the decals, the fusalage decals are peeling off with almost no effort. Quite irratating. I've heard off applying clear nail polish but I'm reluctant to as I'm quite happy with the finish and don't want to ruin it. Please help
When should I use (Enamel) Varnish?
Unless your model has a dark base colour, you want to look slightly browned or dirty with age or is going to be exhibited in a very dark place, NEVER!!!!
Use Matt, Gloss or Satin Cote instead; You can also make washes out of the Humbrol Cotes.
Same for Humbrol Decal Fix (use Micro set/sol instead).
Also, Revel & Tamiya 'do' make far better metallic colours and I personally only ever use Tamiya for clear colours.
THanks so much Owen your tips and comments realy do help again Thank you KA
Greetings from Australia!
G'day Owen, Would love to share that you were my inspiration to paint tanks by hand. Although I can professionally airbrush there's just something about hand painting.
One of my favourite videos on your channel that helped me weather tanks was your Sherman Firefly. My question for you is, Do you enjoy building and comparing the differences in detail of US tanks modified for the British?
For example the M10 Wolverine became the Achilles.
Fisher line, 0,16-0,12 mm.
Owen, where is the BISCMARK!!!?
it died
My favorite paint is Vallejo
Humbrol enamel wash works fine on enamel just be careful on acrylic
Hi Owen, greetings from Serbia.
I like the way how you have made a suggestions, and also answers with the model kit, painting, etc.
However, I wonder one thing: Where can I send you questions about models, decals, etc.? I have no idea, that's why I'm asking. This is my third video that I have watched, and I'm also interested in learning new technique of model kits. Some of the techniques that I have seen I'm also using, before I have subscribed to your channel, and also without knowing your channel.
Looking forward to see the answers to other questions, and also on mine question/questions as well (I hope). Keep it up, and don't give up.
Thanks for your comment, I'm pleased that you're enjoying the videos :) check the links in the video description for my social media
@@quickkits OK.
I have been collecting die-cast commercial aircraft for a long time with over 160 models and just brought my first 1:72 military aircraft scale kits. What would you recommend to someone who is a beginner like me?
Great to hear you're starting the hobby! Perhaps check out my video "Scale Modelling for Beginners" which has a lot of tips which might help you
Quick Kits I’ll go watch that video. Thanks,
Where is the biscoff
My dad got me into modelling when I was really young, I’ve started building them again now and I’m about to build a WW1 heavy bomber biplane Vickers Vimy
I'm pleased you're getting back into the hobby! Nice choice of plane ;)
EZ line is good for rigging or aerial’s 👍
Hi - What do you recommend as the best matt varnish that you can apply with a brush, over the finished model (ie over the top of the entire model and finished decals)
Hi Owen I managed to make the Bismarck it was really hard but the out come of my ship look pretty good I wish I could show you a picture of my ship I haven't finished painting it yet so.
You can always send me photos on social media (links in video description)
Top bloke, great advice.
I've never used Humbrol acrylics, but I love those Revell Aqua paints. they barely make any brushstrokes if thinned properly and when I use drying retarder you would think I'm using enamel paints :D The only problems that I had were with Revell Aqua 56 Blau, it seemed as if there wasn't enough pigment in them, they created these streaks of blue colour. Had to apply a lot of layers to make an even finish. Also I can't seem to thin some of the gloss paints with water, so I need to use alcohol. I'm glad you are back. Do you have any model kit to build for a video?
Interesting to hear, thanks for the insight :) as for kits: I've got a few things lined up
@@quickkits After a life time of using Humbrol enamels and acrylics, I've just taken the move over to Vallejo Model Color. Really pleased with the results. Getting a brush stroke free finish - and an air brush look. Have to experiment with the colour matches though, but worth it.
Great video!
Please build a battleship model
Just to say gloss varnish Does not go on glass lol fogs it up and apply varnish before decals to prevent slivering
My favorite part is assembling the model, at first you have that skeleton of the tank; then as you go further and further you get to see that famous or beautiful look of a tank or a plane and it just gets you (at least me) more hyped to make it good as possible.
Hataka is a good acrylic model paint (from my experiences)
So you were also into model trains? It would be great if showed your layout if it still exists as a diversion from your usual content
Sadly it got dismantled many years ago :'( I was hoping to dig out some photos of it for this video but I didn't have time
2:30 the best questions
Is academy a good model brand?
Yes
Thank you a lot realy helped me out ☺👍
Very pleased to hear it ☺️
Owen u are the best!
❤️❤️
Hi. Just guys use a product called easyline for biplane rigging. I have no personal experience other than rave reviews on other RUclips vids etc
Thank you for the help 👍
@@thesidingshow4656 my pleasure mate
Armour Empire I will upload a vid when it is finished on my channel if you want to see it finishe
@@thesidingshow4656 for sure. Will do
Armour Empire have a good one
Easiest model and quickest that you ever did?
No no its just for fun
my worst modeling moment is when I accidentally used enamel paint on my model
Can u name me in a video its me Valdemarclemmensen from Instagram. that Will Be my greatest Thing in the model world
Don't do it Owen
who tf disliked
First!
Unfair!
Stop
Build a Russian aircraft.