BetaFPV LiteRadio 2 SE - with added USB-C and no OpenTX. Supplied by BetaFPV

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 122

  • @johnk8825
    @johnk8825 3 года назад +2

    Very complete review not only of this unit but comparison to the non SE version and the company response to calls. It does seem like a nice little radio that they don't really expect buyers to keep using for very long as they will outgrow it. Thanks for your honesty.

    • @CurryKitten
      @CurryKitten  3 года назад

      No worries. Yeah - it's a nice thing to have in a bundle with the goggles and a whoop (in fact they do a kit just like that) but it falls down when compared to a "proper" radio

  • @BEYTEK
    @BEYTEK 3 года назад +4

    I’ve been off the drone scene for like 6 months and soooo much has changed

  • @ericcoker8784
    @ericcoker8784 2 года назад

    Thank you soo much for a video that explains the protocol change *perfectly*! The first one had to be returned due to either user error or product malfunction...or both. This controller was sitting in its box till today. I have already changed the protocol to D8(3x flash) cuz it was on Futaba (4x flash). Now it is charging up. Later it will be bound to a Betafpv Meteor65 lite (silverware). Wish me luck. Currently it is bound to a Radiomaster Zorro! Awesome controller and still learning.

    • @CurryKitten
      @CurryKitten  2 года назад

      It confused me as well, which is why I wanted to demo it. Good luck on the flying!

    • @ericcoker8784
      @ericcoker8784 2 года назад

      @@CurryKitten IT WORKED! I am tempted to get another Meteor65 and run with it.

  • @cyclops-fpv
    @cyclops-fpv 3 года назад +1

    I've got the jumper T-lite and love it and I've also got the betafpv radio lite in bayang and frsky protocol's and they work perfectly.I buy a lot of betafpv products especially brushed motors and even though I know a lot of have had their fingers burnt I can honestly say I've not had a single issue with any of their products (yet).btw nice review thx Wayne.

    • @CurryKitten
      @CurryKitten  3 года назад

      Thanks for this - glad to hear there's some positive experiences as well !

    • @transitionfpv6707
      @transitionfpv6707 3 года назад

      How do i bind it to meteor 75

    • @jpslayermayor9293
      @jpslayermayor9293 3 года назад

      I agree - I have jumper and BetaFPV Tx's and products. Stay away from BetaFPV if you value your sanity is my advice

  • @dl7a
    @dl7a 3 года назад

    Just to close the issue sucessfully. it worked, I changed the Steeringmodus of the betafpv literadio2 SE to Mode 3. There were some issues on the gimbals and the mainbard which does not fit, when you chage the gimbals. But you can make it work. Thanks to all who supported.

  • @MCsCreations
    @MCsCreations 3 года назад

    Awesome flying and review, Wayne! 😃
    That's a pretty nice little transmitter for a beginner! Really nice!
    Stay safe there with your family! 🖖😊

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Cheers MC

    • @jpslayermayor9293
      @jpslayermayor9293 3 года назад

      ITs not nice when it doesnt function as per their instructions. It should be a good Tx for beginners. I would go withj new Iflight beginner Transmitter myself

  • @the-happy-RC-flyer
    @the-happy-RC-flyer 3 года назад

    Love the T-shirt!

    • @CurryKitten
      @CurryKitten  3 года назад

      Thanks - I had that pre-covid as well :D

  • @fcass
    @fcass 3 года назад

    Great video, and I absolutely love BetaFPV - I've worked with them for years and they've been nothing but prompt and helpful. (You have to account for the difference in time - if you ask a question when it's after 6pm in China, you'll have to wait until the next day to get your response.) Great company though. A real innovator in the industry, works with all of us pilots to stay in the air. Thumbs up.

  • @Hugo27-h9k
    @Hugo27-h9k Месяц назад

    I got this with the Cetus pro and I wanna upgrade to a 3s but will the radio work with a frsky d8 receiver?

  • @junkthe
    @junkthe 11 месяцев назад

    Hello 2 years ago, i made to havit its and Cetus Pro FPV Kit rtf, that i dont know what type of the LiteRadio it was,
    This Video really help alot.
    To identify which Radio do i get.
    An deep Review for more of this LiteRadio 2 SE, is i need it. Would you do more ?
    I gave ya thumbs.

    • @CurryKitten
      @CurryKitten  11 месяцев назад

      I think I did another video about swapping out the board so you could use ELRS instead of FrSky, but with the very low price of more fully featured radios such as th RadioMaster Pocket, I'm not intending to return to this one any time soon.

  • @helmuthuneke1775
    @helmuthuneke1775 3 года назад

    I had good experiences with them, to remind you of Chinese new year, no one at the office

    • @CurryKitten
      @CurryKitten  3 года назад

      Oh sure, now is CNY, but I was trying to get hold of them for several weeks

  • @gmivisualsjason3729
    @gmivisualsjason3729 3 года назад

    Excellent

  • @mr.crowley3542
    @mr.crowley3542 3 года назад

    Nice review! Thx for the contents! Do you kindly know if there is a way to show the RSSI value on the OSD with this radio?

    • @CurryKitten
      @CurryKitten  3 года назад +1

      It will depend on the type of receiver you are using. SPI rx's running d8/d16 will supply the RSSI signal to Betaflight (but you have to say the there's no RSSI channel in the receiver tab and just add RSSI to the OSD) if you are using an XM+ then it's just a case of telling the receiver tab which channel the RSSI is on and then adding it to the OSD

    • @mr.crowley3542
      @mr.crowley3542 3 года назад

      @@CurryKitten Thx for your feed! Is it possibile that since literadio 2 se has just 8 channels it doesn't support the RSSI? I have a xm+ receiver and I don't see any aux channel showing the RSSI strength...

    • @CurryKitten
      @CurryKitten  3 года назад +1

      I don't think it matters to be quite honest, but I'm away and can't test. Reason why is that the receiver itself it passing the RSSI signal back to the FC. It doesn't care if your radio can use that channel or not

  • @macio5752
    @macio5752 2 года назад

    What type of drones it can connect to ? I’m new to this hobby 😅 and what’s the best starter FPV drone that can connect to this transmitter

    • @CurryKitten
      @CurryKitten  2 года назад

      Depends which model you buy. Anything with a FrSky rx or ELRS depending on the version. What the best "starter" drone is depends a lot on what sort of flying you want to do and how much you want to spend. Personally I think going straight into 5" is the easiest way to go - just because of ease of getting spares/upgrades - but for an all in one smaller setup look at something like the Emax Tiny Hawk freestyle where you'll get a little quad that's been setup pretty easy to fly, goggles and radio

    • @macio5752
      @macio5752 2 года назад

      @@CurryKitten thank you for replying , what do you think about the betafpv kit ? Any Good for starters ? Or the emax is Better

  • @TheFrancis1971
    @TheFrancis1971 Год назад

    Hello. Is it possible to get a list of fpv drones with which this controller is compatible? Thanks.

    • @CurryKitten
      @CurryKitten  Год назад

      Not really - as this radio comes in several different flavours of transmitter protocol and quads may come with a receiver or you may have to put your own in there. So if you are looking to buy a quad and it comes with a receiver already installed then check what it is. In 5" race style drones, odds on it's going to be either ELRS or FrSky. If so then the ELRS or FrSky version of the radio should work with it.

  • @CliveFpv
    @CliveFpv 3 года назад +1

    Be interesting to know how long those gimbals last,

    • @CurryKitten
      @CurryKitten  3 года назад

      That I don't know. The first one is still going and was used a lot for simming, but IIRC roll was always a bit inaccurate anyway

    • @drumalley3063
      @drumalley3063 3 года назад +3

      25 minutes in my case....
      And no reply from BEATFPV

    • @CliveFpv
      @CliveFpv 3 года назад

      @@drumalley3063 ouch

  • @captainmarvel576
    @captainmarvel576 Год назад

    I have Darwinfpv with ELRS receiver. Which mode do I need to set this transmitter to ? Its my first drone so am lil lost.

    • @CurryKitten
      @CurryKitten  Год назад

      You need to have purchased the ELRS version of this radio if you want to connect to the quad you've bought.

  • @Boycey_UK
    @Boycey_UK 3 года назад

    My usb socket came out on my first one but my replacement is serving me better I think these little tx are great for whoops etc 😁😁

    • @jpslayermayor9293
      @jpslayermayor9293 3 года назад

      Luckily for you they responded. They began ignoring me and my case ID

  • @paulwebb2553
    @paulwebb2553 3 года назад +1

    Customer service is poor. Took 1 month together a response. I now have the literadio 2 SE but like you, can not use on my Mac!!
    Did you get a solution or even a response ? I'm still waiting..........

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Yes - they said they knew customer service had been poor and were hiring new people to attempt to address this. I told them about the mac issue, and they said they were going to speak to their engineer.... then when I followed up they'd forgotten to ask him again, and I'm still waiting for an answer to that one. I'll keep hassling them until I get an actual answer though

  • @andrewamenta6597
    @andrewamenta6597 3 года назад

    Is there any way you could make a tutorial video on how to assign aux switches on this controller? I’m trying to build a mini quad with two cameras and a Vifly switcher, but not sure how to assign channels without a screen on the controller. It would make my day!!!

    • @CurryKitten
      @CurryKitten  3 года назад

      The switches are already allocated to channels, so if you go into betaflight modes and add a new mode with AUTO as the AUX name and switch the switch it should pick it up. I used to know exactly which switc hwas what channel, but I can't remember now.... in the worst case it would only take a few minutes to figure them out in the modes tab through trial and error

  • @dl7a
    @dl7a 3 года назад

    Thanks for the nice vid. Can one change the steering mode? e.g. Mode3 left stick roll/nick right stick yaw throttel...thanks

    • @CurryKitten
      @CurryKitten  3 года назад

      You can buy is as mode 1 which would put your throttle on the right stick. BetaFPV have this video about replacing the gimbals ruclips.net/video/aQjLOgvARXk/видео.html it looks from there that you could potentially move the strip which makes the stick spring back to centre - but not completely sure on it

    • @dl7a
      @dl7a 3 года назад

      @@CurryKitten Graeat man, thats exactly what I did yesterday after searching a solution. I changed the gimbals yesterday night and right now i will go to the workshp and solder the cables. I will keep you informed. Thanks again for your help and regards from Berlin

  • @Jamesmoore-mj5ke
    @Jamesmoore-mj5ke 2 года назад

    How do you charge the no lipo version radio

    • @CurryKitten
      @CurryKitten  2 года назад

      Plug in the USB and it charges up

  • @KiwiPhil.
    @KiwiPhil. 3 года назад

    jumper t lite is 3x the cost in Australia :o

  • @the-happy-RC-flyer
    @the-happy-RC-flyer 3 года назад

    Wayne my experience with BetaFPV support is they are extremely slow at responding.

    • @CurryKitten
      @CurryKitten  3 года назад

      The negatives are way in the lead so far - I think a company that can really respond well to a problem wins more loyalty than a regular ok transaction, so it's a shame their response is not better.

  • @Man-kk3bn
    @Man-kk3bn 2 года назад

    I have this controller and I have been unable to get it to work with a simulator, the purple light comes on but when I open the sim to calibrate it doesn't do anything.

    • @CurryKitten
      @CurryKitten  2 года назад

      Purple, what you should be seeing and doing is: you turn it on and led goes from red to blue. Once it's blue plug in the cable and it should appear. What OS and version are you using, and which sim are you using ?

    • @Man-kk3bn
      @Man-kk3bn 2 года назад

      @@CurryKitten I am on windows 10 with fpv skydive, I did get it to work once a couple days ago so I do not think anything is

  • @jmillerfpv
    @jmillerfpv 3 года назад

    Will this bind with frsky xm+?

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Yes - although the caveat to that is that it can't be running the v2 firmware

    • @jmillerfpv
      @jmillerfpv 3 года назад

      Thank you

  • @viviendelva240
    @viviendelva240 3 года назад

    thank you for this review!! i'm very new in fpv world and i just bought this new lite radio 2 se for training on liftoff simulator, BUT , i'm a mac user and my mouse become crasy when i plug the remote...
    any solutions for that?
    Thx! ;)

    • @CurryKitten
      @CurryKitten  3 года назад +1

      As far as I can see (and I checked quite a bit) there's no easy way of redefining something that appears as a mouse as anything else on MacOS. So you get 2 alternative options. Firstly use a wireless wireless USB dongle - this is something that plugs into USB and you can then bind to it with your radio and it works like a joystick. The other other is a wired USB dongle, this should plug into the trainer port in the back (that little 3.5mm jack) I wanted to test with, but couldn't find any of my USB dongles, but they should work. Search for things like 9-in-1 or 22-in-1 Flight simulator

    • @viviendelva240
      @viviendelva240 3 года назад

      @@CurryKitten wow thank you for your reponsivity!!
      so i'm gona try one of this ! thank you so much!

    • @viviendelva240
      @viviendelva240 3 года назад

      So i finally tried with a 22 in 1 cable but still doesn’t work...😅
      By the way betafpv after 5 messages finally responded me!! Check this message!!! So Mac users consider this before buying one!!!😡😡
      Melody (BETAFPV Hobby)
      Feb 23, 2021, 20:55 GMT-11
      Dear Sir,
      Sorry the lite radio 2SE don't support to connect with the MAC ,plz plug the remote with other computer for Simulator training.

    • @alainraguenesphotographe
      @alainraguenesphotographe 3 года назад

      @@viviendelva240 Hello, sorry for the intrusion. Did you try with a dongle? Does it work now?

    • @viviendelva240
      @viviendelva240 3 года назад

      alainraguenes hi! No worries there’s no intrusions at all!
      So ya i tried with a wired dongle wich i plugged in the remote in 3,5mm jack then to my mac with an USB A port, BUT it still doesn’t work!
      And will not try with wireless one because it cost a bit more than 60$(cad) so it’s about the price of the remote...
      By the way after lots of email betafpv responded me! One guy told me it only works on Windows system...🙃 and an other guy asking me a video of the problem and answer me the technical team gonna works on it...
      So... patience may be an update for Mac users comming... or not😱🤷‍♂️
      Anyway at this time it doesn’t work by itself and with a wire-dongle. 👋

  • @Roby0593
    @Roby0593 2 года назад

    what sim do you use on that old pc ?

    • @CurryKitten
      @CurryKitten  2 года назад +1

      It literally says "CurryKitten Sim" in the corner of the screen :) Have a look in my videos for details about it, or look on github, Steam, Play store of the iOS app store and you'll find it

  • @JeffWok
    @JeffWok 3 года назад

    Should they ever speak to me again. Always great content but thanks for the laugh today.

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Well, I can't seem to get anything out of them in the last few weeks - so who knows. In all seriousness, I'm not sure if being ignored is just a general cultural thing for "you are asking tricky questions we don't know the answer to" They aren't the first company to do so

  • @MrDavidlight
    @MrDavidlight 3 года назад

    hi , meanwhile there is a solution to connect to mac osx , for simulators , for the SE version. haven't found one yet, such a pity.

    • @CurryKitten
      @CurryKitten  3 года назад +1

      BetaFPV told me they'd check with their engineer on this. I've connected it with a wireless d8 compatible dongle, and you should be able to connect with the 3.5mm trainer port to a different USB dongle.... but neither of those will charge as you play which isn't so good. Once I get a response from them (and I'll keep hassling) I'll do an update

    • @MrDavidlight
      @MrDavidlight 3 года назад

      @@CurryKitten thx for the fast feedback, keep on flying...

  • @FlyByWireC
    @FlyByWireC 3 года назад

    Can this bind to things like a normal frsky receiver?

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Anything that runs D8 or D16 (although another caveat of that is that it'll need to be running the ACCST v1, not the V2 - but nobody wants to run the V2 anyway)

    • @FlyByWireC
      @FlyByWireC 3 года назад

      @@CurryKitten Thank you for reply,your video was helpful!

  • @joecachia2
    @joecachia2 2 года назад

    Only bummer is it does not have a sling attachment . True its a light radio , but I found that not straining to hold the controller helps me concentrate on the sticks and not turn off any switches by mistake.
    I ordered the tyro79 , that comes with an identical controller , but I think ill be using the Radiomaster T8 Lite instead.

  • @cpfpv6410
    @cpfpv6410 3 года назад

    This radio only has a one model memory right? Think I would prefer the Turnagy Evolution Pro for $49

    • @CurryKitten
      @CurryKitten  3 года назад

      Just one model correct

    • @aphinity
      @aphinity 3 года назад

      Yes, one model, but you can bind multiple receivers/drones to one model just fine. You don't lose your first receiver's bind if you re-bind another receiver to this.

  • @abwino
    @abwino 3 года назад +2

    Bought the advanced kit 2 direct from BetaFPV, after a couple of flights the drone became unresponsive. It appears to have lost bind but wont bind to anything. It’s silver lite so can’t load a configurator to see what’s going on. Response from BetaFPV has been truly awful. Since I gave up waiting for them and said I wanted to return the kit they are not responding at all. My experience is don’t buy from them.

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Damn, that's a bad story. Sorry to hear about the quad - I've not used Silver Lite so I'm drawing a blank at likely issues. Tried putting a paypal dispute in - if BetaFPV don't respond to it, they will find in your favour

    • @TwentyThrill
      @TwentyThrill 3 года назад

      How did you solved? I have the exact same issue here with the starter kit 2

    • @abwino
      @abwino 3 года назад

      @@TwentyThrill I haven't. They refuse to let me return it and are refusing to refund me. Spread the word is all we can do and only buy from local companies.

  • @rcreviews1412
    @rcreviews1412 3 года назад

    Could i just bind this to a whoop and not have to use beta flight to set anything up ?

    • @CurryKitten
      @CurryKitten  3 года назад

      Not in a practical sense no. If the quad had been previously been set so that all the modes correspond to the correct switches and you didn't need any sub trim adjustment... yes, but that seems pretty unlikely

    • @rcreviews1412
      @rcreviews1412 3 года назад

      @@CurryKitten I just ordered one but i dont have a pc to use beta flight on and i was planning on using this with the eachine novice 1

    • @CurryKitten
      @CurryKitten  3 года назад

      There's pretty much always some sort of betaflight setup to do. Do you have an Android device with an OTG adapter, you can run the Betaflight app from there?

    • @rcreviews1412
      @rcreviews1412 3 года назад

      @@CurryKitten I do not have and otg adapter I could always get one and would any android smartphone or tablet work?

    • @CurryKitten
      @CurryKitten  3 года назад

      It should do yes - although I use the word "should" because there's always an exception to the rule out there.

  • @transitionfpv6707
    @transitionfpv6707 3 года назад

    How do i bind it to meteor 75 silverware

    • @ericcoker8784
      @ericcoker8784 2 года назад

      I got the 65 with silverware. Gonna try to later.

  • @luisluis7677
    @luisluis7677 2 года назад

    We just want to fly who's got the time for betaflight.

  • @sleepingbearffg5008
    @sleepingbearffg5008 3 года назад

    I saw in thread the Gimbles fail after short time? Jumper not Much more but real Gimbles..

    • @CurryKitten
      @CurryKitten  3 года назад

      I've not seen that - which thread, this thread or somewhere else. The original radio is still going ok (although I think roll was always a bit off from the start) and that's been used a lot in a sim. But I'll keep an eye on this one

  • @andytaylor3321
    @andytaylor3321 3 года назад

    hey sir exellent videos i have a hyperbola from brother hobbies iadded a archer rs reciever wich i use them all the tyme i am a ACCESS fan boy not boy choice tho lol ne ways i know theses recievers well and this one is being a jerk every method i try i can not get rssi in my osd on my qx7 i have both setup in a screens with rssi and the vfr and they are both working awsome but still no osd any tips buddy thank u very muchh love all ur vids from ontario canada thanks curry

    • @CurryKitten
      @CurryKitten  3 года назад

      Hey Andy - I've not used the Archer rx's before (which model do you have) I presume they are passing the RSSI back as telemetry to your radio but you also want this in the OSD of your goggles? Does this page help ? www.currykitten.co.uk/getting-the-rssi-value-to-show-in-your-betaflights-osd-frsky-based/

    • @andytaylor3321
      @andytaylor3321 3 года назад

      @@CurryKitten i can maybe skype u whn i select the mixer screen to get rssi that way telemetry does not come up like usuall

  • @breadvr3
    @breadvr3 Год назад

    I just got one and it doesn’t work

    • @CurryKitten
      @CurryKitten  Год назад

      If it's DOA then you need to get in touch with whoever you purchased it from for a refund or replacement

    • @breadvr3
      @breadvr3 Год назад

      @@CurryKitten I sent it back and bought a TX16S mark 2

    • @CurryKitten
      @CurryKitten  Год назад

      That's a significant step up in radios :)

    • @breadvr3
      @breadvr3 Год назад

      @@CurryKitten yea I know but I thought better buy a good radio and not need to buy another one when I get my FPV drone and my friend said that the TX16S is great got some upgrades for it to so I can build it to my liking

  • @JonnyWaldes
    @JonnyWaldes 10 месяцев назад

    My PC won't see it. Probably a driver :(

  • @2perspektiva
    @2perspektiva Год назад

    If somebody knows how to connect it with Android, please write :)

  • @gerrysquire
    @gerrysquire 3 года назад

    late tonight

    • @CurryKitten
      @CurryKitten  3 года назад

      I had to go to a virtual parents evening and was rushing around so much I forgot to make it public for 6pm !

    • @gerrysquire
      @gerrysquire 3 года назад

      @@CurryKitten ah your forgiven

  • @gaylekakac313
    @gaylekakac313 Год назад

    The one thing I actually need to see is how to bind It and you skipped it, augggh

    • @CurryKitten
      @CurryKitten  Год назад

      Did I? if you look at 5:07 I go through binding. It's a case of pressing the bind button in at the back which gives a flashing light to say it's in bind mode. It doesn't stay like that for long though, so have your RX in bind mode ready for it

  • @luisluis7677
    @luisluis7677 2 года назад

    Why make it so complicated.

  • @andytaylor3321
    @andytaylor3321 3 года назад

    i started with beta fpv quads i sgnd emax after lol wish i found them fist 700 on beta products i will send u a pick its sickening and they dont do s%it srry for the lanuage

  • @chrisw3493
    @chrisw3493 3 года назад

    How the hell do I know if the video is worth a thumbs up at the beginning. Since you said to at the beginning I will thumbs down it. I hope that at the end it doesnt deserve a thumbs up because I wont change it.

    • @CurryKitten
      @CurryKitten  3 года назад +1

      Well, that told me :) The "call to action" at the start of the video is something that a RUclips relationship manager advised I do. It doesn't mean "do a thumbs up now without watching anymore" it's a simple reminder to please leave some feedback at some point. The reason why this is at the start and not at the end.... which would seem sensible, is that by the end less than 30% of people that started viewing are still there. Thanks for you comment, I've left a heart for you.... I hope you don't not deserve a heart, because I won't change it.

  • @biolanpi1
    @biolanpi1 Год назад

    Un motivo per cui non consigliarla:
    Non è in grado di utilizzare android joystick emulator ....quindi non può essere utilizzata su smartphone android con OTG. Provata con vari simulatori android dallo smartphone, ma niente da fare. Ovviamente se qualcuno riuscisse a farla riconoscere, mi faccia un fischio

  • @jpslayermayor9293
    @jpslayermayor9293 3 года назад

    Beta FPV is not a good company when it comes to hardware. I tried to work with their customer service and could get no assistance. As far as I could ever figure out is my Tx was defective but of course they wouldnt help with replacing my defective Tx either. Stay away from betaFPV. Not my first problem with their stuff, also had defective lipos from them.

  • @TheMrRatzz
    @TheMrRatzz 2 года назад

    don't use mac!