How to bind BetaFPV LiteRadio ELRS

Поделиться
HTML-код
  • Опубликовано: 5 дек 2024

Комментарии • 133

  • @Dealindustries
    @Dealindustries Год назад +12

    Hey Joshua, pretty sure that’s my drone! Sorry for all the inconvenience, I had no idea I messed up the FC that badly! I sent you a PayPal donation a while ago to hopefully make up for it. Cheers and thanks for helping me!

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +8

      No worries at all man! It was a fun project! I appreciate you donating it so I could make this tutorial.

    • @Masu...
      @Masu... Год назад +2

      Hey! I have same problem. I messed up my drone :) Guy from local drone service bring it back to default. Then 3 times connect and disconnect battery and drone goes pairing mode...

  • @Azreeel
    @Azreeel Год назад +7

    Something to add: the version of beta flight you have flashed is very important if you have an spi receiver. If you are on 4.4 then you will be on ELRS 3.0. If you are on 4.3 then you will be on ELRS 2.0. The lite radio only supports ELRS 2.0, so make sure your receiver is flashed to 2.0 (or you have the right betaflight version if you have an spi receiver).

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад +2

      Yeah and i have a drone with an ELRS receiver (BETAFPV SuperD) on UART. And that receiver has ELRS 3.0 as default. Supposedly, such receivers cannot be downgraded from 3.0 to 2.0. I haven't tried it yet. But somehow funny and an outrage that I can't bind a new BETAFPV ELRS receiver with a new LiteRadio3. This is really incredible...

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is...
      BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...

    • @chantryholdman3720
      @chantryholdman3720 Год назад

      ​@Sugalime3D_FPV I tried the 3.0rc1 firmware and now connecting to the betafpv configuration software the com port no longer shows... has any bound this TX to a pico?

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      @@chantryholdman3720 i think i had the same issue and coukd not update it. So maybe i understand something wrong or it does not work with my setup... My solution for now is to wait a little bit before i try again...

    • @freak33a
      @freak33a 6 месяцев назад

      ​@@chantryholdman3720same issue here, basicly bricked the controller that way.

  • @brianbutler4969
    @brianbutler4969 6 месяцев назад

    Thank you for not editing. Learned from it.

  • @scu-dub
    @scu-dub Год назад +2

    I have a lite radio 3 elrs and I had the same problem with the channels jumping around I fixed it by going into Betafpv configurator and changing the channel inputs then I had another issue with the throttle roll yaw ect ect not matching up I fixed that by changing the channel mapping in betaflight and it worked fine i had to do this with 2 quads though however binding was as easy as pressing the binding button on the radio and using crsfr in betaflight hit bind and I was in business 👍🏼

    • @JustARandomGuyyyy
      @JustARandomGuyyyy 4 месяца назад

      I'v tryed to change inputs but still not works

  • @AchronTimeless
    @AchronTimeless Год назад +9

    I found the easiest way to bind my Lite Radio 3 was to buy a Jumper T-Lite V2

    • @istim
      @istim Год назад +6

      That’s funny I found similar results by buying a TX16S… in fairness to the Lite Radio 3 it probably shouldn’t be expected to do anything as challenging as actually bind to a quad! Sadly it doesn’t even make a good door stop

  • @adamwilson2345
    @adamwilson2345 Месяц назад

    thank you thank you again Mr bardwell you a FPV GOD. may your name be spoken of in the history books

  • @exiledfpv
    @exiledfpv Год назад

    BetaFPV was my introduction to FPV. Ironically, you put this video up on a day when I was struggling to bind a new Cetus X to a LiteRadio 2 SE. My issue was different though and I was lucky I caught it (since I'm still a noob to all of this but I am definitely learning). Connecting the controller to the BetaFPV configurator, the internal module had gotten turned off (I've never owned or used an external module). As soon as I turned the internal module on, it bound without any issues.

    • @grahamashby2111
      @grahamashby2111 Год назад

      How do you turn the internal module on?

    • @exiledfpv
      @exiledfpv Год назад +1

      @@grahamashby2111 Using the BetaFPV configurator (not Betaflight), connect the controller and on the setup page, it's in the second section titled 'RF Module Setup', the very first option is for turning your Internal RF Module on or off....switch it to 'on'.

  • @yannickmandaba1801
    @yannickmandaba1801 16 дней назад

    Ho yes thank you... I did try like hell with ELRS Configurator in so many ways...and I did already download BETAFPV Configurator but I decided very early that it was only for the NON FC Cetus X...

  • @W1rbel
    @W1rbel Год назад +8

    Betafpv seems bit uncomfortable to use sometimes and touching a lot of issues, but this comes from the wideness of product line and integration level. Finding something like default firmware or settings for less popular customer and product usually even more disgusting.
    For now, there is the one issue about betafpv impacting me. Elrs 3.x was not ported to literadio yet (work in progress afaik), making you unable to flash betaflight 4.4 and even some minor 4.3 to spi boards, cause this versions already migrated to new elrs, incompatible with previous.
    Even so, im not 100% sure this issue should be resolved only from betafpv side. See: with betaflight 4.4 you have support for flysky, spectrum, and other ancient spi receivers, but dropped elrs 2.x - why shouldn't it be still available alongside with 3.x?

  • @janozako
    @janozako 9 месяцев назад +3

    hello one problem, I don't have this"bind reciver" button in betaflight? Can you help me :)?

    • @fparkes6
      @fparkes6 3 месяца назад

      Neither does mine. Did you ever find the issue?

  • @Fozzedout
    @Fozzedout Год назад +1

    I went through this pain a month ago. Except there was no connection. Ever. I gave up and bought a Radiomaster TX12 instead. Seems that ELRS 3 support was needed, which that controller does not have.

  • @HPgamesHPgmes
    @HPgamesHPgmes 6 месяцев назад +1

    Hi Joshua,
    What receiver should I buy to fix on HGLRC sector 132 4K PNP version when I have the betafpv ELRS radio already.
    can you please recommend me one exact reciever to buy please. I'm new to the hobby and live in India. Please advise me a video link to solder the things in a right way.
    Thanks

  • @sunsetpark_fpv
    @sunsetpark_fpv Год назад

    LMFAO JB I just went through a similar headache this past weekend with my Meteor75. I am referring to the CLI dumps and Hex files on the website - they were useless. Luckily I had done a "dump all" and "diff all" before I started, and was able to comb through them for relevant data.
    I then opened the quad and checked the hardware to confirm which FW was needed on the AIO.
    Installing BF 4.4 solved my headaches. It was a very frustrating 2 days or so. I feel your pain.

  • @mercurymoyes4018
    @mercurymoyes4018 Год назад

    Thankyou for this jb it confirmed I know nothing and messed up the last couple of quads I tried lol to bind like the blind leading the bind! Having no computer makes it harder in some ways.. Its on the list after a few more drones. Thankfully a local nz quad shop @kiwi quads sorted our emax quads with same issue-the boy who opened the clock ,and they were honest and said they hadn't been bound correctly and one had come unbound! They really could have tucked us hard saying I'd fryed this and that and I'd have believed them. So nice to see there are still good humans doing business! Now to send them our betafpv Cetus and beta3" fingers crossed but I'm definite in need of a new radio!

  • @tripletakaoren6328
    @tripletakaoren6328 Год назад +1

    Rapidly unplug the drone three times until you get a double flashing green, then hit bind on the controller and boom. That’s how I did it.

  • @GayleKakac
    @GayleKakac Год назад +1

    Have you tried binding it to the BetaFPV Radio Lite 2.0?

  • @andrewfoster7325
    @andrewfoster7325 Год назад +2

    OK---same thing happened to me. Would not bind so I contacted BeataFPV. They said hit the bind button on the radio and plug and unplug quad 3 times leaving it plugged the 3rd time---it did bind but still won't fly. Motors arm for a second the spin out of control. In my case a waste of $109.

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +2

      Number one cause for that in a bind n fly is you installed the props wrong.

    • @andrewfoster7325
      @andrewfoster7325 Год назад

      The props came installed. It was BNF.

  • @prostheticconscience6707
    @prostheticconscience6707 Год назад

    A few months ago I bought a DarwinFPV AIO 1-2s FC with SPI ELRS onboard, which used this exact firmware. I went through about as much trouble to bind it as you just did.

  • @KCQuadTronX
    @KCQuadTronX Год назад

    THANKS FOR THIS GREAT VIDEO AND SO MANY DETAILS

  • @user-hi5quadxplorer
    @user-hi5quadxplorer 3 месяца назад

    Can you please make a video about the RM Pocket ELRS on building binding phrase. I know everyone else has one but you explain things in way that I actually learn and you don't waste time telling dumb little stories like others. My SD card won't get a read on any computer in my house (3) and the radio works still bound to my one quad but I can't download it to my SD. What can I do please?

  • @DustStep
    @DustStep Год назад

    After purchasing the Cetus x RTF Elrs version, I lost my drone in the reed forest. So I bought a new BNF, but it didn't bind to the Literadio3 controller, so I watched this broadcast. I tried to connect to the Betafpv configurator, but even if I tried to connect with the power off, the serial port kept turning off in loading. Please let me know how to fix it

  • @JamesTsang-be4cf
    @JamesTsang-be4cf 3 месяца назад

    Hi Josh, can you help me bind my Air75 to my lite radio 3?
    I copied and pasted the bind phrase from betaFPV configurator to betaflight and I’m getting an error lesson in CLI: error in set: invalid name (then the copied code)
    I can bind my Cetus X to the radio no problems using both your methods but tried with Air75 and I’m getting nowhere ☹️☹️ please help!

  • @blaydgs
    @blaydgs Год назад

    Hello, great video, I bought this one with elrs system, can I modify it to Frsky without buying modules? Only in the bind as you are showing?

  • @Jacknoham
    @Jacknoham Год назад

    How do I get the configurator?

  • @stevegigg6066
    @stevegigg6066 7 месяцев назад

    Should my LR3 bind to sub250 nano20 via betaflight or betafpv config ? I’m dying out here 😢😊

  • @jimbo_bp8309
    @jimbo_bp8309 Год назад

    Hey guys I bought an Eachine novice 4 a few months ago, and I’ve had a range of issues with it so far from screws that won’t come out to faulty batteries, after soldering a wire back in and going out to fly the goggles were disconnecting when I armed it, just the feed not the fps information, and I took the drone out today and the goggles basically don’t connect at all, they show twitches of the image but other than that nothing, just the gps information .
    Any help on the issue would be greatly appreciated
    Thx 🙂

  • @petrokey
    @petrokey Год назад +1

    I can get elrs byte code (thank your spi elrs video), but how can I convert it back to word?

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +1

      You can't as far as I know. It's a one way hash.

  • @Bossbmx
    @Bossbmx Год назад

    I have a crux35 hd v2 uart elrs and a literadio3 and cant bind them im reading about elrs 2.0 and elrs 3.0 i have a boxer on order but thats not going to ship for another month and its my 1st vista quad so im really looking forward to trying the digital system please tell me there's a way to bind them or im going to have to wait a month min to even try it😢. Also my crux35 came with a polar nano weirdly too thanks
    Jason

  • @jeremiahmartin3977
    @jeremiahmartin3977 9 дней назад

    Bought a metior65 and a literadio3. Was told it would just bind with the button but won't. And when I hit connect in betafpv it just keeps saying connecting. What do I do. I've bought many drones and never get any of them to work but really want to get into the hobbies. Seams like everything is stopping me

  • @JonR35
    @JonR35 Год назад

    The lite radio 3 pro elrs you use elrs configurator.
    My problem is binding my lr3pro to my rekon 4LR with sbus elrs and not spi

  • @EagleEyeShooting
    @EagleEyeShooting Год назад

    Hey Josh. Appreciate your tutorials. I upgraded my Cetus-X to 4.4.0 to install a future GPS. Having issues with this Betafpv lite 3 radio to bind. Im assuming the ELRS is not updated to 3.0. Is their a firmware update for the remote? Also, unable to update firmware on this remote or it simply wont flash in Windows 11 Betaconfig

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад

      This remote can't be updated to elrs 3.0 I believe so you can't bind it to BF 4.4. You have to stay on elrs 2.x.

  • @Sugalime3D_FPV
    @Sugalime3D_FPV Год назад +2

    I'm very unhappy with LiteRadio3 now. It has ELRS 2.0.1 (from December 2021 !). And there is no ELRS update for the LiteRadio3. So you can't use new ELRS receivers (for example BETAFPV SuperD ELRS receiver on a 5 inch quad) or ELRS SPI receivers with a higher Version of Betaflight than 4.3.

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is...
      BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...

    • @BatzBenzerFPV
      @BatzBenzerFPV Год назад

      @@Sugalime3D_FPV Where can i find it?

  • @davidgoodman8996
    @davidgoodman8996 Год назад

    Joshua, searched high and low have some questions on FPV and looking for some is insight issues. Being vague because posting on RUclips isn't the best

  • @gaylekakac313
    @gaylekakac313 Год назад

    I think my Meteor 65S is bound to my BetaFPV Lite 2.0 radio as I see the throttle, pitch and yaw move in BetaFlight Conf. But when I disconnect it it doesn't arm. Any thoughts?

  • @junkthe
    @junkthe 4 месяца назад

    I can't bind Betafpv
    LiteRadio 2 SE to my old D8 frsky RX 4channel V8R4-ii, maybe you can explain ?

  • @fabiankocieba
    @fabiankocieba Год назад +1

    How do you bind the literadio 3 pro though

  • @ellisonchan6204
    @ellisonchan6204 Год назад

    Hi Joshua, can the BetaFPV drones be used with regular ELRS transmitters, like the RadioMaster?

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +1

      All elrs hardware is compatible no matter who makes it.

  • @thiagOrloski
    @thiagOrloski 5 месяцев назад

    Firmware update was interrupted and my Radiolite 3 no longer turns on, but the USB emits an unknown hardware signal in win11

  • @grahamashby2111
    @grahamashby2111 Год назад

    I have a 2022 meteor 65 pro elrs and a radiolite 3. In order to bind them to I have to use the conigurator or can I just use the bind buttons?

  • @ikesparrow2490
    @ikesparrow2490 10 месяцев назад

    just got this drone and it will not bind with lite v3 remote. also the reciever remains in uart and crsf. i can use any help.

  • @Smagsfpv
    @Smagsfpv Год назад

    I actually was wondering if I had the Cetus X kit if I could use the controller with that drone or other elrs drones. I think I learned something today 😃

  • @pheonix2160
    @pheonix2160 5 месяцев назад

    Unfortunately the latest version of Beta Flight has removed the Bind Receiver tab.

  • @gsgsgsgs3650
    @gsgsgsgs3650 6 месяцев назад

    None of my betafpv products connect with betafpv configurator. What am i doing wrong? I've tried 4 different computers and have the same problem with them all. PS I'm ready to subscribe to your patrion if you can help me.

  • @petrokey
    @petrokey Год назад +1

    Btw, does this lr3 supports elrs3?

  • @ethanbaucher3034
    @ethanbaucher3034 3 дня назад

    ive been trying to connect my bete fpv controller lite 3 to my pc to use it on a simulator, anyone know anything about it?

  • @petrokey
    @petrokey Год назад

    May bind it to cetus x, but using a pairing word)

  • @MCsCreations
    @MCsCreations Год назад

    Well, I hope you can at least fly it, Joshua. 😬
    Anyway, stay safe there with your family! 🖖😊

  • @minusdream440
    @minusdream440 Год назад +1

    i update to the hall gimball is quite better now actually is my daily driver from 1 year

  • @kalciferus4792
    @kalciferus4792 Год назад

    and at the expense of manual connection, I don't have a "bind reciever" button in byteflight

  • @abracadaver7687
    @abracadaver7687 Год назад

    Putt battery in plug unplug 3x and bind radio button the 3 time 🤷‍♂️👀

  • @kalciferus4792
    @kalciferus4792 Год назад

    unfortunately it doesn't work that way(
    I do everything the same, I write this phrase in beta fpv configurator, copy the result to betafpv, but nothing happens after that

  • @Mostvisible
    @Mostvisible Год назад

    I just simply want to already knowitall and not have to put my brain through all this learning😖🤣 If it were not for (BSquared of Fpv) Bardwell and Blunty are helping us tremendously.

  • @micbanand
    @micbanand Год назад

    thanks for your videos. but please turn your mic settings down a little. it distorts slightly, and therefore sounds very bad :)

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +2

      No offense, but are you sure it's not your speakers? My mic definitely is not clipping. The mic gain is very low, like peaking at - 25 dB during normal speech, to avoid clipping. I carefully level to -14 lufs and then I run a hard limiter at -1 dB at the end of my audio chain to catch any transients. I do notice my standard audio level of -14 lufs is louder than most other channels use, so maybe it's causing your speakers to distort. But it's easy to turn down the volume.

    • @micbanand
      @micbanand Год назад

      @@JoshuaBardwell I dont think so other videos sounds fine. but I will have a closer look :)

  • @brandonw987
    @brandonw987 Год назад

    I dont think you copied the compete set of numbers and pasted them in the cli. It looked like some of the numbers left off.

  • @FunkySwanson
    @FunkySwanson 8 месяцев назад

    Bind button doesn't work. Great tutorial..

  • @fisioclinicacm
    @fisioclinicacm Год назад +1

    Definitivamente esto no funcionó para mi teniendo, una literadio 3 y un modulo externo nano elrs de betafpv.
    Actualicé mi cetus X a la 4.4 de betaflight y el modulo externo nano TX a 3.x de elrs y no funciona y los controles en betaflight estan bloqueados, sin embargo en betafpv configurator van a la perfeccion... Asique he decidido vender la literadio 3 y comprar una radiomasterzorro para tener mas opciones de actualizacion y de modificacion de parametros.
    Definitivamente la literadio 3 no es recomendable si quieres profundizar el mundo del FPV.

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is...
      BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...

  • @626jonny
    @626jonny 3 месяца назад

    Hello I’m new to this hobby and honestly I’m giving up because I bought a hummingbird and a controller that T-Lite Jumper but can’t bind them together. I use 3 of your videos and download beta fly to update the drone for I could bind to the Control, but as I download it better flight to a laptop that I end up buying just for this hobby end up killing the laptop. I took it back to the store. they asked me what did I download and I told him Beta flight they did their test on it and they told me I caught a virus and it killed the laptop completely. So if anyone knows if I could buy a drone & controller kit that’s bind already I would appreciate it. Not trying to lose money on laptop because of software.

  • @CodedGames
    @CodedGames Год назад +10

    Unfortunately everyone watching this video probably already owns a BetaFPV LiteRadio, but if you haven't and are thinking of getting one, don't. It's literal trash. And my experience is almost everything BetaFPV makes is also garbage. The fact that you need a dedicated video about how to bind a radio and a bunch of problems happen show that BetaFPV's products are terribly designed. It's ELRS, it should work like every other ELRS product but doesn't because BetaFPV thinks they can do it better but ultimately does it way worse.

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +5

      For the record -- and I think I was clear about this in the video -- the problems in this case were because the guy who owns this quad couldn't get it to bind and did all kinds of crazy things with the config and flash and messed it up. This one is NOT betafpv's fault.

    • @CodedGames
      @CodedGames Год назад

      @@JoshuaBardwell I don't think you should entirely blame the guy. If you check reviews on Amazon for the Meteor BNFs you'll see a bunch of other people saying that the firmware was broken. I even bought a Meteor65, did not mess with the firmware and had the same problems shown in the video. At the time I didn't find a solution so I just returned it on Amazon. I've just had nothing but bad experiences with BetaFPV products and since many of their products are marketed toward new pilots I think it's good to steer people toward other companies (had good experiences with iFlight, Happymodel). Besides software issues the LiteRadio 3 has horrible durability. Everyone I know who's had one has had the gimbles randomly start freaking out after 1-2 months of use. The Zorro is so much better

    • @truckgurry4921
      @truckgurry4921 Год назад

      I have exactly same issue but not with beta fpv but with jumper t lite v2 My betafpv lite radio 2 bound no problem

    • @FunkySwanson
      @FunkySwanson 8 месяцев назад

      Betafpv sucks. I can't get this trash to bind to my drone. I have no clue how to figure out what is wrong. Fpv community is toxic on reddit.

    • @freak33a
      @freak33a 6 месяцев назад

      With elrs 3.0 it got even worse - now you need betafpv configurator 2 and once you managed to update the literadio 3 to elrs 3.0 usb is not working anymore. Dont ask why. Also it will only bind to one of the recievers i tried so far, all on 3.3.0...

  • @BatzBenzerFPV
    @BatzBenzerFPV Год назад +1

    literadio with ELRS module does NOT work with ELRS V3... Only V1... Confirmed by BETAFPV... Returned...

    • @W1rbel
      @W1rbel Год назад +1

      Nop. i'm flying elrs version 2 actually

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      @@W1rbel Mine is at 2.0.1. BUT the newest ELRS reciveres (BETAFPV superD, and a DarwinFPV ELRS receiver taht was with my drone)) I have bought have ELRS 3.0. BETAFPV shame on you that my LiteRadio3 doesn't work with these receivers yet. Thus, the LiteRadio3 is really rubbish at the moment! According to a RUclips post, 3.0 receivers cannot be downgraded to 2.0 either...

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад +1

      It seems there is now an ELRS V3 update. However, still a candidate. So do it at your own risk. But this shows that a stable ELRS V3 will definitely be possible or perhaps already is...
      BETAFPV would have had to do that no matter how if they wanted to keep their remote compatible with new products...

    • @BatzBenzerFPV
      @BatzBenzerFPV Год назад

      @@Sugalime3D_FPV great. thanks..will test it soon. it will be a sim controller for a kid, so I will have no dramatical impact, if the radio link sucks.

    • @Sugalime3D_FPV
      @Sugalime3D_FPV Год назад

      @@BatzBenzerFPValso put the BETAFPV hall gimbals on it. After 7 months my poti gimbals was defective... The good thing is, it's easy to change.

  • @fantasybeast7202
    @fantasybeast7202 Год назад

    If you did a weekly drone giveaway that 275k subs would shoot tf Up. Let'sGo! #Challenges / entertainments for DroneNerds alongside the avg dude. #GetOutTheNiche

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +3

      I give away between $400 and $800 in prizes every month on the new product roundup, and a separate give away on my Patreon every month. I do it because I want to give back. Realistically, giveaways are a bad way to get subs. People sub only because they want the prizes and then don't watch your content. It inflates the sub number but has no actual value.

    • @fantasybeast7202
      @fantasybeast7202 Год назад

      @@JoshuaBardwell #MoreMarketing!

    • @mercurymoyes4018
      @mercurymoyes4018 Год назад

      @@JoshuaBardwell prizes bring the scammers out like flies ,kinda sux I like giveaways but I don't trust half the web sadly why I don't have PayPal and got rid of my debit card..now shits hard to do:(

  • @ZenoMinus
    @ZenoMinus Год назад

    I tried LiteRadio last year I don't recomand this radio to anyone, I had keep recalibrating the sticks and is so unprecise

  • @Editer38738
    @Editer38738 Год назад

    I've tried with no success
    Cheers from Knoxville

  • @CDRaff
    @CDRaff Год назад +1

    Why did I watch the whole video for a quad I don't nor will ever own?

  • @ShawnEngland
    @ShawnEngland Год назад +4

    This is painful... Why would anyone choose to support a company that does this?

    • @ssgllc7007
      @ssgllc7007 Год назад +6

      Me. Because I bought the Cetus x kit before any binding tutorial. It honestly wasn’t All that bad. Might be a good option for a kid, if they have access to a laptop that is.
      The drone is absolute trash, and the tune is crap. Constant desyncs I think, falls out the sky on sharp turns.

    • @W1rbel
      @W1rbel Год назад

      @@ssgllc7007 Yep, cetus is a separate pain...
      tended to be easier in use than others, but... fpv hobby is not something that easy to make easier

  • @devanshshah9274
    @devanshshah9274 Год назад

    How to bind without a configuration

  • @GardoRotor
    @GardoRotor Год назад +2

    If you like to punish yourself use a lite radio. Lol

    • @W1rbel
      @W1rbel Год назад

      literadio 2/3 still most compact rc transmitters with integrated antenna. Also highly likely literadio 2 forms was stolen by (great and terrible) jumper t-lite. While literadio was copied from xbox controller. While literadio 3 looks self-designed. While jumper t-pro stolen again from dji. Lol

  • @CarbonGlassMan
    @CarbonGlassMan Год назад +1

    Quick, learn how to bind it before the gimbals stop working.

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +1

      You're not wrong

    • @CarbonGlassMan
      @CarbonGlassMan Год назад

      @@JoshuaBardwell I wish I were. I got 3 weeks out of the V1. 2 weeks out of the V2. Not even going to try the V3.

    • @BowOneFire
      @BowOneFire Год назад

      ​@@CarbonGlassManif you upgraded to the hall gimbals it would last years though

    • @istim
      @istim Год назад +1

      @@CarbonGlassMan the gimbals in v3 I had didn’t even work out of the box….

    • @CarbonGlassMan
      @CarbonGlassMan Год назад

      @@BowOneFire I considered it, but the price of the gimbals was about what the radio was, and the only reason I bought this radio was to have a very inexpensive D8 radio. So instead of buying upgraded gimbals, I bought the V2 radio for a few bucks more than the price of just the gimbals. I'm happy with BetaFPV's receivers, their 2.4 and 915mhz modules, but their little radio turned out to be a waste of money.

  • @BabaYagaFPV
    @BabaYagaFPV Год назад

    They could totally just put a standard Elrs RX on that quad, makes zero sense to do what they do.

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад +2

      Not exactly. The SPI receiver saves the cost and board space of the ESP chip, which is significant.

    • @BabaYagaFPV
      @BabaYagaFPV Год назад

      @@JoshuaBardwell I guess I’m talking about the bigger picture, the cost of maintaining software to do a job that other software already does and does a much better job of doing. My personal experience with this exact equipment was the FC getting bricked by betafpv config when updating to match the controller firmware, and betafpv refusing to exchange for another. So i foolishly bought another and it wasn’t recognized by betafpv config. It’s dodgy software that they need to either ditch or put a lot more money into, or just put a regular RX and call it a day.

  • @J.D.Vision
    @J.D.Vision Год назад

    Oh, they're selling a white one now?
    🤷Cool, I guess!

    • @borisdamole
      @borisdamole Год назад +1

      White is the old one, black with a screen is newer

  • @Kmart_FPV
    @Kmart_FPV Год назад

    Oh BetaFPV…Why are you the way that you are?

  • @macofish1
    @macofish1 4 месяца назад

    I click connect and the button stays blue and won't connect.

    • @Cvft99
      @Cvft99 4 месяца назад +1

      same thing happens to me, were you able to figure it out?

    • @macofish1
      @macofish1 4 месяца назад

      @@Cvft99 Yes! A different computer and then there was no USB conflict which I d/l all the "suggested" fixes. Try a different computer or google USB fixes first, (which didn't work for me). Once the other PC was able to "Connect" I assigned the bind phrase and saved. Then in betaflight config I assigned the same bind phrase and now it works everytime. I can explain further or give you a video if you need help. Cheers.

  • @abracadaver7687
    @abracadaver7687 Год назад

    It’s 3 seconds works 🫣🫠🤔