Это видео недоступно.
Сожалеем об этом.

air pump repair (ecoplus,commercial air,hydroponics,aqueon,hydrofarm) (diaphragm)

Поделиться
HTML-код
  • Опубликовано: 6 фев 2012
  • this pump holds only 38 litters with 18 watts power
    attn:make sure the pond liner or rubber is flat on the surface or make a little bigger hole on liner for screw

Комментарии • 46

  • @danielsteele2592
    @danielsteele2592 8 лет назад +5

    Thanks for the video! My pump was still pumping air, but getting louder and louder. Fortunately for me, I was able to access both rubber 'flaps' from the discharge end and didn't need to take the other end apart. Thanks again, I have a quiet pump now!!

  • @liampconline
    @liampconline 5 лет назад +2

    Worked perfectly. I used a cheap inflatable beach ball to make the little discs.

  • @shanemenz1877
    @shanemenz1877 9 лет назад +1

    thanks a bunch!!! my pump stopped working after 2 days of use! I had a replacement from another aystem so I got by.. luckily. I just flipped the existing rubber pieces and it makes noise again.... it works for now!!!

  • @legendfpv
    @legendfpv 4 года назад +1

    Great music, thanks.

  • @dahliaday17
    @dahliaday17 9 лет назад +5

    I agree with the unnecessary music... Explanation on what exactly your doing and trial and error wisdom of the pump would be a lot more helpful. Also DO NOT use a heavy material for the gaskets! The thinness of the rubber material helps its flap allowing air to pass through the holes. Other than that interesting vague video on fixing stuff.

    • @gardenpondfishgreenhouse573
      @gardenpondfishgreenhouse573 4 года назад +2

      Why shows you exactly what to do, does he need to explain with words, "undo screw, cut rubber". A moron should be able to follow this, nice job, very helpful. Muted it then, he took the time to make this for us, you think you could spend the 2 seconds or less it takes to mute it if you don't like. "Do everything the way I like or I will complain", signed Snowflake a hole.

  • @Allaahesuno
    @Allaahesuno 12 лет назад +1

    great video. keep them coming

  • @shanemenz1877
    @shanemenz1877 9 лет назад

    u saved me $115!! THANKS AGAIN.....

  • @Mr1SUPERB
    @Mr1SUPERB  12 лет назад +1

    @marthale7 no problem ..thx

  • @PorterCountyIWLA
    @PorterCountyIWLA 11 лет назад +1

    big help-- I appreciate your willingness to help-- I was able to repair mine with the help of the video--need advice-- can I use any kind of oil to lubricate the piston? I am pretty sure mine needs it

  • @Mr1SUPERB
    @Mr1SUPERB  11 лет назад +1

    i used 45mil pond liner on this one but you can try the 20mil or double it

  • @tainchains
    @tainchains 7 лет назад +1

    My ecoplus commercial air 1 is losing pressure. Will this modification help with that?

  • @mikedisher30
    @mikedisher30 4 года назад

    Nice video who cares about the music great fix now to fix mine 👍😁

  • @GoldThumbGardens
    @GoldThumbGardens 10 лет назад

    Will you have to change those round rubber pieces latter? Also what exactly do the round rubber pieces do for it? This is awesome video I have been looking for a fix for my commercial 110L Active Aqua air pump (AAPA110L). Do you think this will work for it? Its getting a little weak on the air pressure.
    Other pumps offer a diaphragm replacement but I don't think these style of pumps have replaceable diaphragms.

  • @akangel7298
    @akangel7298 8 лет назад

    good job !

  • @nilasetitik2658
    @nilasetitik2658 2 года назад

    let's listen to his knowledge and experience...
    please support and greetings from nila setitik chanel 🙏🙏🙏

  • @daniel3484
    @daniel3484 12 лет назад

    thanks

  • @mathewbinkley
    @mathewbinkley 11 лет назад +1

    I've been looking at the EcoPlus 1 Commercial to see if I can convert it into a small vacuum pump, but there's not much info to go on. Is the air intake the offset tube sticking out of the black cap? Is it big enough to accept a 1/4" barb adapter of some sort? Thanks for the video, it was helpful.

    • @kevinwayne7055
      @kevinwayne7055 4 года назад

      find a tiny Refrigerator that the compressor still works -- makes a Great Vacuum Pump and very powerful and quiet. And should use no more than a 60watt light bulb to run.

  • @NIGHTSKYE1
    @NIGHTSKYE1 11 лет назад +2

    does what you did to the pump make it quieter?

  • @Haleigh267
    @Haleigh267 11 лет назад

    Where did you get that air diffuser? It looks really cool and like it can put out some serious air.

  • @Mr1SUPERB
    @Mr1SUPERB  12 лет назад

    yes

  • @antonioflauzino
    @antonioflauzino 9 лет назад

    do you think tire tubes will work? and the screw for the "front" diapraghm, is not original from the pump right? so i need one too

    • @BlackJedi169
      @BlackJedi169 7 лет назад +1

      Yeap Inner tubes work just use the old rubber as a template or use a compass, thats what ihad to do to my 60ltr a minute has it was sounding like a airplane and was way much louder than my bigger pump.when i repaired it , it was much quitter and then i done the same for the bigger one now they are both lower in Db (decibels)

  • @krowtenip
    @krowtenip 8 лет назад

    if the windings coils are burnt can it be repaired ?

  • @jaspercats
    @jaspercats 12 лет назад

    hi can you tell me did you use 20ml or 45ml liner, are both cut outs the same size, thanks and keep up the helpful videos!!!!

  • @allanfloresvalverde7499
    @allanfloresvalverde7499 9 лет назад

    Hello, you saw a bomb buy Hydrofarm AAPA45L but after half an hour of use is heated and stops working, some suregerencia or help to correct the problem, thanks in advance

  • @InfraredVision
    @InfraredVision 11 лет назад

    I have been trying to find reviews on these pumps.. there isn't much out there.. I ordered a EcoPlus Commercial Air 7 200Lpm 200Watts hope it works good... How long did the pump run before it broke?

  • @nickharwell9909
    @nickharwell9909 11 лет назад

    Company wouldn't give it a tune up?

  • @johnlim8618
    @johnlim8618 8 лет назад

    sir myy pump is pumping less air compare to the first day i bought it. what happened?

  • @alibernard1366
    @alibernard1366 6 лет назад

    Music sux. Ruins video. Was the purpose to make the pump louder?

  • @MrMac5150
    @MrMac5150 10 лет назад +11

    Loose the music, it ruins your video.

    • @gardenpondfishgreenhouse573
      @gardenpondfishgreenhouse573 4 года назад +1

      muted it then, he took the time to make this for us, you think you could spend the 2 seconds or less it takes to mute it if you don't like. Do everything the way I like or I will complain, signed Snowflake a hole.

  • @jwardcomo
    @jwardcomo 6 лет назад

    This does not work. The pump requires a bell shaped rubber part, not a flat rubber piece as shown.

    • @legendfpv
      @legendfpv 4 года назад

      You tried it and tested?

  • @Makyang09
    @Makyang09 7 лет назад +8

    Are you a mute??? Explain yourself!

    • @gardenpondfishgreenhouse573
      @gardenpondfishgreenhouse573 4 года назад +1

      Why shows you exactly what to do, does he need to explain with words, "undo screw, cut rubber". A moron should be able to follow this, nice job, very helpful.

    • @30eesh
      @30eesh 3 года назад

      @OP go watch porn tat should clear things up for you...

  • @iamhe981
    @iamhe981 5 лет назад

    This guy doesn't have a clue what he is doing. Doesn't even show the flapper valve that needs replacing.

    • @loubapache
      @loubapache 2 года назад +1

      For this type of pump, what he replaced are the two "flapper" valves. The one on the piston is the intake and the one on the (front) body is the output. They serve the same purposes as the "flapper" valves in a diaphragm pump. It is a piston pump so no diaphragms are needed.