The starter from hell This AWD equipped Jeep Cherokee with the 948TE transmission PTU was painful
HTML-код
- Опубликовано: 6 фев 2025
- I work at Brothers Motors in Snellville Ga if you want a estimate on repairs. Please note we work on appointments only. So look us up at www.BrothersMotorsLLC.com and set up an appointment. Please NOTE: The bulk of my time in the comment section is spent on comments and questions from SUBSCRIBERS, If you not subscribed, or leave off the question asking are you subscribed, I have to get to those questions after im done with all the subscribers questions. Please understand, this very important. Also guys/gals, if you need to get in contact with me ASAP concerning info or help, please use the CashApp $20 donate feature to $JohnnieRayThomas. Simply donate and a message will come to my phone and I can get in contact with you ASAP, thanks. Or simply leave your comment or question in the comment section. Thanks for viewing an Online Mechanic Tips video with JT the Car Guy. As always ask any questions you may have but please consider subscribing to the channel because I speak about a lot more. Please use the donate links to my Paypal or my Cash App if you wish to donate and help support the Channel. This also sends a direct message to my cell phone alerting me of assistant needed quickly, which means I can get back to you quickly. Thanks in advance. If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: www.paypal.me/...
Cash App here: $JohnnieRayThomas
#JTtheCarGuy
Ptu can be removed without taking the intake off. I have done it multiple times. I remove the starter bolts on the bottom with a ratcheting wrench. I also don't remove the rear prop shaft, I just pop it off the splines and let it sit there.
Interesting
@OnlineMechanicTips do know if you had to remove the PTU connector harness to replace the starter? I just had mine replaced a couple days ago and the technician that was working on it broke the connector and the dealership wants me to pay for it of pocket. I'm trying to figure out if the connector was never touched before why would it break. So my biggest problem is that I have the SRVC 4WD light coming up now that they replaced the starter.
I watched a Ukrainian video the guy removed the sub frame/crossmember whatever that is. Went quickly. PTU fell right out
For a fact, take that trans mount bolt off and jack the engine forward as much as you can PTU will come sliding right out, also for starter bolts up top a half moon wrench works wonders
Had my starter replaced recently on my 2019 Jeep Cherokee at 83K miles. Fortunately, the cost, $1600, was covered by the extended warranty minus a $200 deductible.
Car manufacturers are doing this crap on purpose, gonna be funny when they make it so complicated even factory trained techs can physically get at anything. It will eventually get there until they realize that techs aren’t a dime a dozen anymore
Make me appreciate my old 4.0 liter jeep cherokee inline 6 replace starter in 15 minute.
Your channel is growing fast as ishhh 👍
Thanks Kang
JT where did you get that sweet transfer pump. Love the channel!
Doing one of these RN on a 2019 Cherokee. I want to rip my hair out. Hoping this can help me in some way.
O on my short video I don't show much at all. Only got 60 seconds on these. I just show and talk.
Starter is a pain on the awd for sure. Front wheel drive I can do starter all from the bottom of vehicle. Top bolt can be a pain but i can get it out from bottom with a serp belt tool.
The starter on my 02' Liberty 4WD was a nightmare, also? Dropped the front axle on the first one, had the pinion seal leak 2 weeks later, even though I greased it and was careful? The second, could have just unbolted the motor mounts, thanks for your tip, but was working on the ground? Took the exhaust manifold out, which was a nightmare in itself to get the last starter ever out? Thanks for the tips, JT.
The engineer who designed this knows JT personally 🤣🤣🤣🤣. Did you forget to pay his $10 spot back🤣🤣🤣🤣😂😂😂
3:42 "I'm really starting to use my brain"
Better late than never, Jus Terble. What are you going to do for a career?
Career? Simple, just keep making videos, haters like you will always support that. They cant help themselves.
@@OnlineMechanicTips You work at two shops and do side hustles plus YOUTUG! Dang boo, wurr u berryn it at?
AAY, AAY! Don't stash yo nut in the attic unless you put it in an ammo box, ooohlright?
Im glad my renegade is only front wheel drive
GOOD JOB JT. THEY NEED ENGINEERS TO WORK ON THEM TO SEE HOW MUCH FUN IT IS TO WORK ON.🤨
Jt that starter replacement is ridiculous! Would make you want to leave Dodge/Jeep… 😅. Just about all starters will fail.😮 That starter should have been engineered somewhere else. Intake gaskets will be needed if dried up. Love your videos! 👍🏾
What does this pay under warranty? I haven’t had the displeasure yet.
O.M.G. I've got a '22 3.2L Cherokee w/948 & transfer case! That could be me trying to do that stuff with no "shop" or lift!
I am a used carlot mechanic. I use youtube when i need help. But what book are you talking about? And what do you use for instructions so to say when you need help
Alldata pro or Mitchell most likely
I also have the Jeep Cherokee 4X4*. I got it never needs any of that work. Yikes! That's a job with tight access.
Why I have the sensation that you pumped in the wrong fkuid? The mopar fluid is light brown, not red
You may need to get your sensation feeler checked out my friend.
@@OnlineMechanicTips ok ok, lol 😆
You wouldnt like it if pay was an issue. You would probably love the teaching part though. Nothing like sharing wisdom and watching students' eyes widen and jaws drop.
I have a 2006 Jeep Cherokee Limited 5.7 Hemi i have changed the drive side cv axle gets to 50 won’t change gears sell or fix paid 2500 for it 200 plus on it this market is crazy for car!!
This is interesting since Jeep never put a 5.'7 in the Cherokee. It won't fit!
@@tedlulis973 I will post the engine on my channel🫡
I absolutely despise these multi air vehicles! Would much rather work on the 3.2 versions of these turds...
Omg what a nightmare 😳
Is it any easier to just yank the whole drivetrain out of these and separate on the floor? Just an idea, I don't know. Europeans love to overengineer things. I'm sure someone is gonna correct me in the comments and say oh that's a Jeep. 😂😂😂
That's how you know it's a fiat design
That has nothing to do with why the starter in that position.