I have the same tractor and my position control doesn't work. It will lift and lower but I have no in between. The inside lever(closest to you with the square knob) does pretty much nothing. Any ideas what I could look for? I'm going to try to change fluid and filters soon. Mine also has multipower(which doesn't work)
Can someone tell me what is wrong with my Massey Fergerson 165 Hyd.? I was going a hill using a box scrape and dropped off into a steep deep gully and rear tires came off ground as only the scrape and front tire were supporting the tractor. Speed of tractor keep tractor going and and tractor continued on but box scrape was all the way up and would not lower. Help. After tractor sits implement will drop to ground when not running but will rise upon starting tractor with control lever in any position. same with draft lever or any combination of both.
I had the same problem. Decided to put in a new hydraulic pump and that solved the problem. It was around $500 CDN for the pump and winter was coming on so I went with that instead of a rebuild. Not a bad job.
I have the same tractor and my position control doesn't work. It will lift and lower but I have no in between. The inside lever(closest to you with the square knob) does pretty much nothing. Any ideas what I could look for? I'm going to try to change fluid and filters soon. Mine also has multipower(which doesn't work)
Wedge 2x4 wood blocks between the front of the oil pan and front axle on both sides and it can't pivot side to side.
FoMoCo1 True I almost lost front from tilt.
Assistente trator Massey Ferguson aí também nos Estados Unidos
Can someone tell me what is wrong with my Massey Fergerson 165 Hyd.? I was going a hill using a box scrape and dropped off into a steep deep gully and rear tires came off ground as only the scrape and front tire were supporting the tractor. Speed of tractor keep tractor going and and tractor continued on but box scrape was all the way up and would not lower. Help. After tractor sits implement will drop to ground when not running but will rise upon starting tractor with control lever in any position. same with draft lever or any combination of both.
Where you able to find your problem? My 165 has the same problem
Just wondering if you could give me some insight as to why my 3 point hitch won’t pick up a load
I had the same problem. Decided to put in a new hydraulic pump and that solved the problem. It was around $500 CDN for the pump and winter was coming on so I went with that instead of a rebuild. Not a bad job.
I broke my speed lever ... Didn't take round covers off first.
11MNGO
بدي الكلام بالعربية
هلوو حبي يشرح على جهاز كنترول الهودرليك تبع الرفع
Kardaş Türkçe konuşki anlayak
يول لاتمظرط كول المضخه عاطله ونهي الموضوع
فلم س
فلم نيك