Thank you very much My friend ! I found quite a lot of dark forum with non precise information, and your video saved my project ! Big thanks from France 😀
Amazing, got it working with the help of this video, did the changes in the boot config and then set my IP address manuallt from option 1 configure network interfaces, anew network deviceshowed up re1 before ther ewas only em0, I set the IP on the re1 and voila, i was able to connect to the web interface. thanks a lot!
This is extra fun to figure out with a European QWERTY keyboard 😂 So far I've managed to find these keys: [ = ] is the key left of backspace [ _ ] is [shift] + [questionmark] [ " ] is [shift] + [ä] or ae (replace ä with whatever you have in the same physical location) Now to figure out how to save edit and exit... Neither esc nor any other key seems to work... Guess it's something with a modifier 😢 Update: [del] is functionally backspace when typing [backspace] will exit edit mode (not confusing at all) [shift] + [dash/underscore] will jump the cursor to the command line at the bottom and initialise it with a colon ( : ) After that, all I had to do was add "ws" like you mentioned after the colon and hit [enter]. There goes that hour. I sincerely hope it helps at least one other person :D Got my web interface up and running now. Thanks again!
Dang, I looked at the layout and I'm already confused. If it helps at all, you need to hit Esc to exit out of input mode. Then type :wq :w is save :q is quit You can combine both into one step :wq is save & quit
@@SomethingAzn Update: I ended up finding all the right keys, will add onto the og list in first comment. Unfortunately, esc does not exit edit mode. I'm sure :w and :q would work if I managed to leave edit... I ended up working around it by mounting the iso in Windows (I used PowerISO, but anything similar works), edited the loader.conf file directly in notepad, saved changes and reflashed the iso to the USB. I haven't actually tried installing TrueNAS after this part yet, but I don't see why it won't work. Will drop an update when I do. Thanks for the helpful info in the video :)
@@SomethingAzn Thanks again man, managed to get it up and running with your help. I updated the og comment in case anyone else runs into the same issue as me.
You re a life saver! Thanks a lot. The German keyboard makes it unbelievable hard. Not gonna lie it took me 3 hrs. In the end I just did a button slamming combination to exit edit mode. It's up and running finally! For now I'm just too scared to ever turn it off again. Thank you very much for this comment!!!!!!!
You just saved a very nice computer from being run over. I have been having trouble getting TrueNAS to work. One problem right after another. So I built a whole new computer and ran into this nonsense. You simple fix worked like a champ. Thanks a million.
You really saved me!! This was so much easier than with usb! the only think that i got stuck on was the esc after typing in the boot loader and :wq enter then i was able to exit. Thank you very much!
Thank you dear lord why arent these lines in the default install is beyond me. Thank you so much! Now my NAS works as I thought it was intended to originally work!
Thank you! This took over an hour to find a solution. Almost every other solution was to buy new hardware and avoid Realtek, which isn't always a realistic option. Thank you thank thank you!
Damn, I never comment, but you deserve a thumbs up, comment, and sub for this one. Scratched my head for 20 minutes then solved in 3 minutes with your video. Mobo: MSI MAG B560i Gaming Edge
wooooow...i was having such a hard time with the .conf commands lmfao.....to save and exit you need to hold down shit then press colon then pres w then press enter to save lmfao...same with exit i beleive cant remember now..hold shift press colon then q then enter.....im a bit slow i guess hahahah...but thank you bro 2 years later and this helped me as well from having to buy a freakin nic lol...liked
Like a lot of people my first NAS is made from leftover desktop hardware rather than server-grade equipment, so when I couldn't connect after updating the OS I was spooked. Got it working again with your help, thanks a bunch!
Good brother, I made the installation truenas but it says that they are having a problem in the web interface, I did this in your video but it is not resolvable, could you help me
Thank you very much for your help: actually this screen appeared for my case, insteard of the TrueNAS webpage. I will try what you ded and let you know !! Thanks !!! Michel
Thanks a bunch for this video mate! Was trying to put together a TrueNAS with old PC parts and came across this issue and following your video worked a treat. Probably saved the NAS project. Is the Tunables tweek necessary, or was that only for the Windows BSOD?
This is so funny because I was doing research for building a PLEX and thought TRUENAS sounds great but has quiks like drivers etc. which may or may not work on your "non server" grade hardware. There are things I could do like you described but in the end going windows myself simply because it works out of the box and the simplicity and familiarity of it. Also the community is definitely hit or miss for sure lots of old curmudgeons who are stuck in old ideologies. Thanks for the vid. :)
Did not work for me... still having Connecting to TrueNAS ... Make sure the TrueNAS system is powered on and connected to the network. , at last truenas is a buggy system for some hardware sadly...
Doesn't work for me on a Gigabyte B450-I AORUS PRO WIFI. It doesn't work when I use an USB to Ethernet adapter either. What's the best alternative to TrueNAS for someone not very comfortable with command line stuff? Like I just want something that works. Maybe later when I'm more comfortable with things I can change to something else. I'm looking to setup a personal cloud server, not a media server.
@@RpR456 hey, so this probably doesn't apply to you, but for me it ended up being a borked in-wall ethernet port. I have two next to eachother, and only one of them works correctly. based on this, I'd say consider going over your ports and cables on both/all sides, to make sure there isn't an issue there. as soon as I plugged the server into the other port, everything worked. and anything I plug into the broken port has no internet (though it does see/establish a connection)
Hi Everyone .. So I working on my first TrueNas Core box .. I am trying to edit the file as shown but when I try to save and exit nothing happens .. or I get Q is not a valid command .. Help as I am stuck until I can get TrueNas to see my onboard network card ..
I am using the GA-H61M-DS2V board using Realtek 8111F chip. Could the problem you mentioned be solved in the same way? I just started NAS setup and ran into the same problem. Please help me.🤕
thankyou so much! changed my nas mobo over to a brand new b560 with 2.5gbe port and truenas wouldnt detect network. still only says 1000baseT as interface. you wouldnt happen to know how to change it to 2500baseT?
@@SomethingAzn unfortunately for me after i restarted system i was back to same problem. followed the instructions again and the commands were still in there but just wont work. put my old 10year old motherboard back in there and connects straight away. i guess truenas doesnt like new equipment
If you haven't changed anything, your error is probably not this. However, this doesn't really remove anything. It only adds checks to use something that's already there but not currently enabled. Worst case, if it doesn't fix your error, you can remove the added lines
I will try this, but I am running truenas scale however i have installed it on a TERRAMASTER F4-423 as I didnt like terramasters OS - I have tried everything and since my NAS was assigned a different IP adress after a reboot (i never set a static IP) i cannot access the web interface. Do you have any idea how i could fix this? @@SomethingAzn
i swear this worked for me before but now i am having network issues again, changed some network hardware. I am using TrueNAS Scale and I cannot see the loader.conf file in the boot directory. Not sure if something changed.... any help?
Quick question, I'm getting this error after moving to a new place with a new IP ofc, will doing this delete the data already on my Trunas? P.S I'm a noob I know lol.
Trying this fix, but I can't get it to add lines, hitting enter just moves the cursor down. I am on version 13, so I don't know if that was something that changed.
@@SomethingAzn I did, just like the video. And colon Q and W weren't being recognized as legit commands. But I was able to get the MoBo's onboard NIC to work. With any luck I won't need to dig out the graphics card again. And I got the turntables setup, so going by the video it shouldn't be a bother going forward.
My TruNAS system was working fine for a few weeks. Then I added a static IP on my router, and the system continued to work for another week. Randomly I started getting this issue. I tried your method, but it did not work. Would an update remove drivers?
This issue is mainly for people setting up new servers or updating existing ones. I don't think your problem relates to this unless there was some other update that you didn't know about
Typing in this command line is making me want to throw my NAS off my balcony. Why the fuck is it constantly switching what I'm doing when I just want to type???
Will this resolve issues with RealTek 1Gb onboard hardware or is it specific to 2.5Gb? Mine will sometimes handle 60MB/s file accesses for hours before failing, and at other times it will fail after 5 minutes and my NAS disappears from the network. I just picked up an Intel NIC, but would love to be able to resolve my problem by just adding 2 tunable entries.
No idea, but no harm in trying. I remember reading about someone else having problems with a RealTek 1Gb, but I don't remember if they found a solution
@@SomethingAznThanks For getting back to me! I'll try adding the two statements via the editor. If that works, I'll add them as tunables. If it fails and I can't access the NAS over the network, I can always just edit out the two lines. I'll update this comment later either way in case others will benefit from this experience.
No joy. I made the changes and fired up a bunch of file transfers from one TrueNAS machine to another via a Windows 10 desktop. The transfer reached 60MB/s, ran for about 7 or 8 minutes, then the source machine dropped off the network. I'll probably just install a couple of Intel-based 1Gb nics and be done with screwing around. At about $25 each, it isn'r worth my time to keep messing around. Thanks again for making the video and responding to my question! Much appreciated, sir.
@@SomethingAzn I installed an Intel NIC in one of my TrueNAS machines and did some large file transfers to a Windows-based PC. It worked great, transferring about 500GB of data at 90+ Mb/s. I did the test transfer twice and it went without any problems both times. I'm pleased that a $25 NIC and just a little bit of time and effort has resolved my issues.
Based on the forum comments, Realtek is not supported by default. However, they added a beta driver that needs to be enabled. It should be enabled automatically in some future version, but based on people still having this problem, I'm guessing this future version has not arrived yet
@@SomethingAzn Nope, it does not support out of the box, like Core. I’ve tried both before found your video :) now I am on core, planning to test scale this weekend
Good info and it worked. But some people who setup truenas aren't experts and most of your steps you didn't explain. Also, warnings should come before you tell us to save and reboot. Not after.
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
2 years later and this saved me. So many forum post saying "you card must just not be compatible" when this is all it took. Thank you!
Thank you very much My friend ! I found quite a lot of dark forum with non precise information, and your video saved my project ! Big thanks from France 😀
this guy deserves 1million more subscribers. this guy is super helpful on issues that ive seen no one else solve
AGREED! This video saved me!
This video just saved my first NAS project! Spent hours digging through forums and the config console before finding this. Thank you!
Amazing, got it working with the help of this video, did the changes in the boot config and then set my IP address manuallt from option 1 configure network interfaces, anew network deviceshowed up re1 before ther ewas only em0, I set the IP on the re1 and voila, i was able to connect to the web interface. thanks a lot!
worked as of today on Truenas 13.0. Thanks
Thank you so much for this! Couldn't find anything remotely helpful anywhere else.
This is extra fun to figure out with a European QWERTY keyboard 😂
So far I've managed to find these keys:
[ = ] is the key left of backspace
[ _ ] is [shift] + [questionmark]
[ " ] is [shift] + [ä] or ae (replace ä with whatever you have in the same physical location)
Now to figure out how to save edit and exit... Neither esc nor any other key seems to work... Guess it's something with a modifier 😢
Update:
[del] is functionally backspace when typing
[backspace] will exit edit mode (not confusing at all)
[shift] + [dash/underscore] will jump the cursor to the command line at the bottom and initialise it with a colon ( : )
After that, all I had to do was add "ws" like you mentioned after the colon and hit [enter]. There goes that hour.
I sincerely hope it helps at least one other person :D
Got my web interface up and running now. Thanks again!
Dang, I looked at the layout and I'm already confused. If it helps at all, you need to hit Esc to exit out of input mode. Then type :wq
:w is save
:q is quit
You can combine both into one step
:wq is save & quit
@@SomethingAzn
Update: I ended up finding all the right keys, will add onto the og list in first comment.
Unfortunately, esc does not exit edit mode. I'm sure :w and :q would work if I managed to leave edit...
I ended up working around it by mounting the iso in Windows (I used PowerISO, but anything similar works), edited the loader.conf file directly in notepad, saved changes and reflashed the iso to the USB. I haven't actually tried installing TrueNAS after this part yet, but I don't see why it won't work.
Will drop an update when I do. Thanks for the helpful info in the video :)
@@SomethingAzn Thanks again man, managed to get it up and running with your help. I updated the og comment in case anyone else runs into the same issue as me.
You re a life saver! Thanks a lot. The German keyboard makes it unbelievable hard.
Not gonna lie it took me 3 hrs. In the end I just did a button slamming combination to exit edit mode. It's up and running finally! For now I'm just too scared to ever turn it off again.
Thank you very much for this comment!!!!!!!
Update from my side: button slamming wasn't smart. As it only started it once but didn't save the changes so back to zero
Excellent! you saved me from having to do a complete reinstall of my server. Thank you!
You just saved a very nice computer from being run over. I have been having trouble getting TrueNAS to work. One problem right after another. So I built a whole new computer and ran into this nonsense. You simple fix worked like a champ. Thanks a million.
You really saved me!! This was so much easier than with usb! the only think that i got stuck on was the esc after typing in the boot loader and :wq enter then i was able to exit. Thank you very much!
Thank you very much! Fixed my issue using a MSI mobo for TrueNas setup 🎩
Thank you dear lord why arent these lines in the default install is beyond me. Thank you so much! Now my NAS works as I thought it was intended to originally work!
Thank you for this. I panicked a bit after reading TrueNAS having issues with AMD Gaming Mobos. I'm really glad it worked!
Yo thanks for saving me!
Love it that it is right to the point and no 3 min intro.
Keep up the great work!
Thanks for the video, I just put together a TrueNAS system together tonight and was stuck at this part for awhile
Dude, I just update TrueNAS and I got the same problem. THANK YOU!
Thank you! This took over an hour to find a solution. Almost every other solution was to buy new hardware and avoid Realtek, which isn't always a realistic option. Thank you thank thank you!
Damn, I never comment, but you deserve a thumbs up, comment, and sub for this one. Scratched my head for 20 minutes then solved in 3 minutes with your video. Mobo: MSI MAG B560i Gaming Edge
DUUUUUDE! This was a huge lifesaver! Thank you!
wooooow...i was having such a hard time with the .conf commands lmfao.....to save and exit you need to hold down shit then press colon then pres w then press enter to save lmfao...same with exit i beleive cant remember now..hold shift press colon then q then enter.....im a bit slow i guess hahahah...but thank you bro 2 years later and this helped me as well from having to buy a freakin nic lol...liked
Just saved me a lot of stress today, thank you so much!
Thank you man! Not even Truenas has known an answer.
Thanks for the pointers. Fixed my issue. I appreciate your presentation style too. Keep it up.
This saved my ass again when I updated my NAS and lost connection to it completely.
Thank you. Saved me buying another nic 🎉
Thank you so much for this. You’re a real one. Much appreciated
Thank you!! You're a life (and stress) saver!
YES! Thank you my dude!
Like a lot of people my first NAS is made from leftover desktop hardware rather than server-grade equipment, so when I couldn't connect after updating the OS I was spooked. Got it working again with your help, thanks a bunch!
Thanks 🙏 Helpt me a lot..Keep up the great work!
Thanks a lot, this worked. Much appreciated.
Good one it helped me from recovery.... keep up the good work. 😀
THANK YOU I was about to take my mobo back to the store lol.
Mille merci mon j'ai aussi sauvé mon projet :)
Dude! You are incredible!
You are a life saver! 🙏🙏🙏
Thanks. This works perfectly
Good brother, I made the installation truenas but it says that they are having a problem in the web interface, I did this in your video but it is not resolvable, could you help me
Thank you very much for your help: actually this screen appeared for my case, insteard of the TrueNAS webpage. I will try what you ded and let you know !! Thanks !!! Michel
TO EXIT AFTER TYPING esc -> :w -> enter -> :q -> enter (should put you back at the root) THEN TYPE exit -> enter -> 10 -> enter -> y -> enter
its saying q isnt a vi command
don't just click " : ", make sure it shows up on the screen (may require holding shift when clicking " : ").
this guy saved my life!
Thanks a bunch for this video mate! Was trying to put together a TrueNAS with old PC parts and came across this issue and following your video worked a treat. Probably saved the NAS project. Is the Tunables tweek necessary, or was that only for the Windows BSOD?
thanks it worked. for my German friends, please use a keyboard with U.S layout
This is so funny because I was doing research for building a PLEX and thought TRUENAS sounds great but has quiks like drivers etc. which may or may not work on your "non server" grade hardware. There are things I could do like you described but in the end going windows myself simply because it works out of the box and the simplicity and familiarity of it. Also the community is definitely hit or miss for sure lots of old curmudgeons who are stuck in old ideologies. Thanks for the vid. :)
Honestly same, I kept seeing it mentioned in LTT videos, but it's definitely not for everyone
You are amazing!
Thanks, worked great!
Amazing post
Thanks man
I can't tipe" _"
Thanks a lot king
Thanks Alot man
Not able to save q isnt a vi command
Where is this file located in the latest Truenas Scale 22?
Cant seem to find it anywhere
Sorry, not sure. Can’t believe it’s still a problem on 22 😪
Did not work for me... still having Connecting to TrueNAS ... Make sure the TrueNAS system is powered on and connected to the network. , at last truenas is a buggy system for some hardware sadly...
thanks for help, it works for me
F ya legendary.
MUCH HELP SUCH CODE wow
I can't figure out how to go up a directory "cd.." does not work
"cd .." Don't forget the space
@@SomethingAzn Wow, you learn something new every day. Thank you very much for the reply
Doesn't work for me on a Gigabyte B450-I AORUS PRO WIFI. It doesn't work when I use an USB to Ethernet adapter either.
What's the best alternative to TrueNAS for someone not very comfortable with command line stuff? Like I just want something that works. Maybe later when I'm more comfortable with things I can change to something else. I'm looking to setup a personal cloud server, not a media server.
Did you found an alternative software or solution?
@@RpR456 hey, so this probably doesn't apply to you, but for me it ended up being a borked in-wall ethernet port. I have two next to eachother, and only one of them works correctly. based on this, I'd say consider going over your ports and cables on both/all sides, to make sure there isn't an issue there.
as soon as I plugged the server into the other port, everything worked. and anything I plug into the broken port has no internet (though it does see/establish a connection)
Hi Everyone .. So I working on my first TrueNas Core box .. I am trying to edit the file as shown but when I try to save and exit nothing happens .. or I get Q is not a valid command .. Help as I am stuck until I can get TrueNas to see my onboard network card ..
Never mind everyone .. I am an idiot .. I hitting ; and not : when trying to do the commands .. Sorry ..
Is this for Core or Scale? On Scale I do not see the same file structure, but have the web interface issue.
This is for Core. I read that Scale should have the driver built in already (I haven’t used it before though)
@@SomethingAzn Thanks, probably an issue with a cable or port, I will keep checking.
I have the same issue, did you find a fix?
@@beecee793
How do you fix this for Scale?
@@Ace-fi8or I accidentally had my cable plugged into my IPMI slot only which was the cause for me
LIFE SAVER
I am using the GA-H61M-DS2V board using Realtek 8111F chip.
Could the problem you mentioned be solved in the same way?
I just started NAS setup and ran into the same problem.
Please help me.🤕
No harm in trying! If it doesn’t work, just revert it
WHAT?! HOW IS POSSIBLE THAT THIS ALSO WORKS FOR WHEN INSTALLING TRUENAS INSIDE OF VMWARE?! JESUS!
😂 that’s crazy
cd.. is not working
Its cd .. not cd..
thankyou so much! changed my nas mobo over to a brand new b560 with 2.5gbe port and truenas wouldnt detect network. still only says 1000baseT as interface. you wouldnt happen to know how to change it to 2500baseT?
I think there might be a fix out there somehow, but I was happy enough getting it to work, so I gave up looking
@@SomethingAzn unfortunately for me after i restarted system i was back to same problem. followed the instructions again and the commands were still in there but just wont work. put my old 10year old motherboard back in there and connects straight away. i guess truenas doesnt like new equipment
@@todd1748 Yeah once you get in the first time, you're supposed to setup the tuneables or else it won't persist upon restart
What about i have this error on my current set up? I cannot access. If i do this method, will i lose all my data?
If you haven't changed anything, your error is probably not this. However, this doesn't really remove anything. It only adds checks to use something that's already there but not currently enabled. Worst case, if it doesn't fix your error, you can remove the added lines
I will try this, but I am running truenas scale however i have installed it on a TERRAMASTER F4-423 as I didnt like terramasters OS - I have tried everything and since my NAS was assigned a different IP adress after a reboot (i never set a static IP) i cannot access the web interface. Do you have any idea how i could fix this? @@SomethingAzn
@@jaipee12 You probably have to check your router to see what IP address it was assigned
I’ve had a look and it does not come up, maybe it’s been assinged an ip address that’s not in range?
@@jaipee12 It could also be because the hardware doesn’t support true nas. Sorry, I don’t know too much. I gave up on TrueNAS
i swear this worked for me before but now i am having network issues again, changed some network hardware. I am using TrueNAS Scale and I cannot see the loader.conf file in the boot directory. Not sure if something changed.... any help?
Sorry for the late response, but this method should only work with Core
WHAT KEYS THAT PRESS TO MAKE TWO LINE?
King
thanks .pls tell is it possible to partition the boot pool
Sorry, I don’t use TrueNAS anymore
wdym colen q and colen space nothing is workingplz help
After you finish the edits, hit Esc to exit the edit mode. Then, type “:wq” and press enter to save and quit the text editor
Quick question, I'm getting this error after moving to a new place with a new IP ofc, will doing this delete the data already on my Trunas? P.S I'm a noob I know lol.
It shouldn’t but it also doesn’t sound like the same problem
You could always unplug your drives and try the fix first to see if it does anything
@@SomethingAzn yeah I tried that, unfortunately it didn't work :(
@@mohji295 Yeah, probably a different error 🙃
Just wondering how you push the lines downward? 😅
Could you clarify what you mean? Pressing enter should work
Trying this fix, but I can't get it to add lines, hitting enter just moves the cursor down. I am on version 13, so I don't know if that was something that changed.
Did you press “I” to enter input mode? Sounds like you’re in visual mode
@@SomethingAzn I did, just like the video. And colon Q and W weren't being recognized as legit commands. But I was able to get the MoBo's onboard NIC to work.
With any luck I won't need to dig out the graphics card again. And I got the turntables setup, so going by the video it shouldn't be a bother going forward.
@@SomethingAzn Press I where? During boot? I have the same problem
@@miljororforsprakpartiet290 Inside the text editor. You need to enter “input” mode before it’ll let you change anything
@@SomethingAzn just when typing? Doesn't typing "if" then disable that mode again?
My TruNAS system was working fine for a few weeks. Then I added a static IP on my router, and the system continued to work for another week. Randomly I started getting this issue. I tried your method, but it did not work. Would an update remove drivers?
This issue is mainly for people setting up new servers or updating existing ones. I don't think your problem relates to this unless there was some other update that you didn't know about
@@SomethingAzn TY for the insight.
Could i hire you to help me?
How to save this configuration am not get w to save and q to quit
Type :w then press enter to save. Then type :q then press enter to quit. You can do it all in one step with :wq
How to exit edit mode esc does not work
Press Esc to exit typing mode, then type :wq to save and quit
Typing in this command line is making me want to throw my NAS off my balcony. Why the fuck is it constantly switching what I'm doing when I just want to type???
thank you!
Will this resolve issues with RealTek 1Gb onboard hardware or is it specific to 2.5Gb? Mine will sometimes handle 60MB/s file accesses for hours before failing, and at other times it will fail after 5 minutes and my NAS disappears from the network. I just picked up an Intel NIC, but would love to be able to resolve my problem by just adding 2 tunable entries.
No idea, but no harm in trying. I remember reading about someone else having problems with a RealTek 1Gb, but I don't remember if they found a solution
@@SomethingAznThanks For getting back to me!
I'll try adding the two statements via the editor. If that works, I'll add them as tunables. If it fails and I can't access the NAS over the network, I can always just edit out the two lines.
I'll update this comment later either way in case others will benefit from this experience.
No joy. I made the changes and fired up a bunch of file transfers from one TrueNAS machine to another via a Windows 10 desktop. The transfer reached 60MB/s, ran for about 7 or 8 minutes, then the source machine dropped off the network.
I'll probably just install a couple of Intel-based 1Gb nics and be done with screwing around. At about $25 each, it isn'r worth my time to keep messing around.
Thanks again for making the video and responding to my question! Much appreciated, sir.
@@theElderberryFarmer Dang, hope the Intel ones solve it!
@@SomethingAzn I installed an Intel NIC in one of my TrueNAS machines and did some large file transfers to a Windows-based PC. It worked great, transferring about 500GB of data at 90+ Mb/s. I did the test transfer twice and it went without any problems both times.
I'm pleased that a $25 NIC and just a little bit of time and effort has resolved my issues.
not working
Does it work on PCIE OR USB adapter?
Depends on the actual network card attached to the adapter. This is mainly for realtek cards
Hi the command : colon W for save and : for Q is not responding reply pls
:w for save, :q for quit
Thx man can you give an explanation on why it does this
Based on the forum comments, Realtek is not supported by default. However, they added a beta driver that needs to be enabled. It should be enabled automatically in some future version, but based on people still having this problem, I'm guessing this future version has not arrived yet
what is the colum w how do i do that
" :w ", press Esc to exit edit mode, then type :wq to save and quit
@@SomethingAzn thank you !
how to save and exit from loader file
Type :w to save. :q to quit
You might have to hit escape to exit edit mode.
Does this trick work on SCALE?
I think Scale is supposed to have Realtek support built in. If not, I assume the process is similar since it’s linux based
@@SomethingAzn Nope, it does not support out of the box, like Core. I’ve tried both before found your video :) now I am on core, planning to test scale this weekend
I did everything right and still have same problem sadly
Your card might not be compatible then ☹️
I tried this but facing same issue.
What issue are you having?
The same error as before. I’m having it too
@@arpitsoni5217 Unfortunately, you might not have a compatible ethernet card then
Wtf is "colon + Q"?
Could've shown that in the video.
":q" ?
speedrunning 1o1
Good info and it worked. But some people who setup truenas aren't experts and most of your steps you didn't explain.
Also, warnings should come before you tell us to save and reboot. Not after.
Doesn't work for me. As soon as I type vi loader.conf, my screen fills with blue ~ symbols. And at the bottom it says "loader.conf" [new file]
If you see [new file], it means the file doesn't exist, so you might be in the wrong directory
Thanks, helped me out
went to the bottom and hit enter after each of the :w and :q commands
not sure if that's required or not but worked for me
Not sure what you mean about going to the bottom, but yes, you have to hit enter after each command. My bad if that wasn't clear!
how do you do this in truenas scale?
I think Scale is supposed to have Realtek support built in. If not, I assume the process is similar since it’s linux based