having just done this let me offer some tips. 1) if you have a version lower than 51.5 - then you need to update to that spec and then do a second update to 55.7 (the final version 2) The biggest problem I had was getting CD to go into setup - the trick is first press setup and then whilst still holding it down then press the return button (not both at same time as is suggested) hold them for about three seconds then you can then proceed 3) scroll down on screens shown because you have to hit the download button - where that is seems to vary between various YT videos
final thing I just learned today when blue-tooth was not connecting to my phone This is only required if your car is equipped with a Bluetooth hands-free system. Do the update procedure twice using CD2.
found this good guide on ebay selling update disks Three CDs for MMI software update 5.5.70. Note that this is not a navigation map, but your media system update. This update will fix a lot of minor issues - better performance of rain and light sensors, minor sound quality improvements, etc. In addition, there is another bigger improvement - new 3D mode is added for navigation (if your car is equipped with DVD navigation and MMI High)
MMI 2G Software Update - Versions and Features Europe 2120 Volume limit increased. Navigation notifications are off while a phone call is in progress. The volume of music is reduced during navigation notifications. Navigate the arrow while searching for an IP. Low-zoom map marking Europe 3460 3D maps (bird's eye view). Fixes CD players, radio tuner, amplifiers, bluetooth, TV tuner, DAB. Europe 4220 AMI USB sources support. Enhance user interface graphics. Fixes for CD chaners, radio tuner, amplifiers, bluetooth, TV tuner, DAB. Europe 5150 = USA 3360 = Russia 5540 AMI iPod compatibility AMI support for ACC and WAV files over USB Bluetooth handsfree fixes Europe 5570 = USA 4610 = Russia 6030 Convenient switching between media sources. Fixed for amplifier, TV tuner, MP3 CD changer, head unit. Audi dropped support for MMI 2G software updates at version 5570, but continues to publish GPS maps for DVDs each year for this system. Preparation Make sure you have Audi Multi Media Interface 2G (MMI 2G) in your car. Check details in article Audi navigation systems - MMI RNS BNS RMC differences. Check you current software version and confirm that it is lower than 5570. Navigate to CAR → SETUP → Version and check SW line. First 4 digits representing the current software version. Update procedure can take couple of hours. It is important to eliminate any power shortage. If you are in poor condition, we recommend using the battery charger while performing this procedure. Turn any unnecessary devices that can cause battery drain while the key is in the ACC position (HVAC system, interior and exterior lights, audio system, phone charger). During this procedure do not use any electrical accessories (electric windows, power seats, central lock, electric boot lid). Take out CDs from the CD changer that's in the glove box or in the center console. MMI 2G software update version EU 5150 / USA 3360 / Russia 5540 - procedure It is possible to update to version 5570 only from software 5150 or higher. This step is necessary only if you are running a software version lower than 5150. Turn the key to position II and wait for the Audi Multi Media Interface to start. Load CD1 into the first slot in the CD changer. Press and hold the SETUP and RETURN buttons. After a couple of second hidden red menu will appear. Release the buttons. Go to SWUpdate → CD-ROM. Update CD content will be verified. Audio will mute. The list of devices ready for the update will appear on the screen. Scroll down to Start download position and confirm the update. This will take up to 40 minutes. Once the update is complete, you will see the update status. Scroll down to restart the MMI and press it. The system will reboot and return to normal operation. Remove the first MMI 2G Software Update CD from the CD changer.
MMI 2G software update bluetooth This is only required if your car is equipped with a Bluetooth hands-free system. Perform the update procedure twice using CD2. You must do this twice when the first update procedure removes the memory of the Bluetooth device. it will actually install the new software the second time you run the CD2 update.
A small question. I have Audi A6 C6 but when I press on phone button on screen it says Telephone is not installed. So am thinking if I’ll update with them CD you sharing if it will fix this ? And in what format CD should be burned ?
Hello , thank you for video , i made update from 2007 to 2018 maps i remove old original DVD and upgraded to 2018 , upgrade is sucefully but how i change voice language sat navi ? i mean 》 after 500 meters turn the right ...i have in english i would like use Czech ... i cant find location where to set up ... thank you ....
@@user-pv1zz6rj8v My CD changer was in glove box. In the trunk was just navigation module and the navigation DVD. Unfortunately I can not check anything because I sold my Audi few years ago.
Unfortunately a6retrofit.com is not working... I don't know whats happened. Anyway - I uploaded the CD's on my Google disk. Here is the link: drive.google.com/open?id=1CzF5aZ-ld2pttkKlIBmh4ct9iUDFuyhO
Братле , записах ъпдейта на 3 различни диска , с 3 различни скорости и всеки път ми дава Download error Drive error! Metalinfo cannot be analysed! Посъветвай ме как да действам ?
Всъщност важното е да се запише на МИНИМАЛНАТА ВЪЗМОЖНА СКОРОСТ, която позволява записвачката. Ползвай дискове Sony, Verbatium. Но винаги има вероятност и самото устройство да е прецакано… все пак е сигурно на 15 години
So I eject all the discs from the charger, insert cd1 in slot 1, cd2 in slot2, cd3 in slot 3 (all in the charger cd) and then just press the sw update? Please be more explicit! Thank you in advance!
@@zm6202 , this is no DVD, but 3 CDs. May be you can update your software in nearest VW-Audi service. Other variant is to download from this location: drive.google.com/drive/folders/1CzF5aZ-ld2pttkKlIBmh4ct9iUDFuyhO to write it on CDs and do the update yourself.
Abhishek Gupta , it seems the web page, where I downloaded the update is not working now. Read the previous comments - you will find the link to a6retrofit.com site. Try to browse it after few days. There is a link where to download the update, and instructions how to do it.
Zdr Brat, imam si6tiya aftomobil audi a6 c6 moi 2g, i iskam da vlizam v zelenia parametir kideto ima aktivirane na blouthouth et takivi o6te ne6ta ama gledah v mnogo video kak go pravat ama s moya aftomobile ne Stava, prosto ne stava be moje bi traybva sa natiskam drugo ne6to ili ne6to tokova, gledam fi te natiskat car i setup, ili pak ima nyakoi natiskat car retourne, a ba vsi4ko probvah ama neznam ve4e kvo da naprava, ako moje6 da mi pomogne6 6e ti sam mnogo blagodaren
За да се активира инженерното меню ти трябва VCSD. В 7-ма група, адаптация, параметър 8 стойността от 0 се прави на 1. Ето видео на руски: ruclips.net/video/xSHwrfkqi6Y/видео.html
It seems that you have a problem with the CD. When you write discs on your CD drive on your computer the speed should be MINIMAL possible - 8x, 4x or 2x. CD should be finalized too. It is important, that CD's have to be with good quality - Sony or Verbatim (for example). If this not help may be your CD player or changer is malfunctioning. Try inserting disk in different slots? shamarr graham
Unfortunately I does it almost 4 years ago, and can not remember what this message means. In my case everything was as it's shown on the clip. May be you should ask for answer Google?
i know it 1 year later, but this happend to me also, no device selected, i believe from the research i made that you dont need cd 2 unless your car has navi and other stuff that my car does not have, i did cd 1 and cd 3 after.
having just done this let me offer some tips.
1) if you have a version lower than 51.5 - then you need to update to that spec and then do a second update to 55.7 (the final version
2) The biggest problem I had was getting CD to go into setup - the trick is first press setup and then whilst still holding it down then press the return button (not both at same time as is suggested) hold them for about three seconds then you can then proceed
3) scroll down on screens shown because you have to hit the download button - where that is seems to vary between various YT videos
final thing I just learned today when blue-tooth was not connecting to my phone
This is only required if your car is equipped with a Bluetooth hands-free system.
Do the update procedure twice using CD2.
found this good guide on ebay selling update disks
Three CDs for MMI software update 5.5.70. Note that this is not a navigation map, but your media system update. This update will fix a lot of minor issues - better performance of rain and light sensors, minor sound quality improvements, etc. In addition, there is another bigger improvement - new 3D mode is added for navigation (if your car is equipped with DVD navigation and MMI High)
MMI 2G Software Update - Versions and Features
Europe 2120
Volume limit increased.
Navigation notifications are off while a phone call is in progress.
The volume of music is reduced during navigation notifications.
Navigate the arrow while searching for an IP.
Low-zoom map marking
Europe 3460
3D maps (bird's eye view).
Fixes CD players, radio tuner, amplifiers, bluetooth, TV tuner, DAB.
Europe 4220
AMI USB sources support.
Enhance user interface graphics.
Fixes for CD chaners, radio tuner, amplifiers, bluetooth, TV tuner, DAB.
Europe 5150 = USA 3360 = Russia 5540
AMI iPod compatibility
AMI support for ACC and WAV files over USB
Bluetooth handsfree fixes
Europe 5570 = USA 4610 = Russia 6030
Convenient switching between media sources.
Fixed for amplifier, TV tuner, MP3 CD changer, head unit.
Audi dropped support for MMI 2G software updates at version 5570, but continues to publish GPS maps for DVDs each year for this system.
Preparation
Make sure you have Audi Multi Media Interface 2G (MMI 2G) in your car. Check details in article Audi navigation systems - MMI RNS BNS RMC differences.
Check you current software version and confirm that it is lower than 5570.
Navigate to CAR → SETUP → Version and check SW line. First 4 digits representing the current software version.
Update procedure can take couple of hours. It is important to eliminate any power shortage. If you are in poor condition, we recommend using the battery charger while performing this procedure.
Turn any unnecessary devices that can cause battery drain while the key is in the ACC position (HVAC system, interior and exterior lights, audio system, phone charger). During this procedure do not use any electrical accessories (electric windows, power seats, central lock, electric boot lid).
Take out CDs from the CD changer that's in the glove box or in the center console.
MMI 2G software update version EU 5150 / USA 3360 / Russia 5540 - procedure
It is possible to update to version 5570 only from software 5150 or higher. This step is necessary only if you are running a software version lower than 5150.
Turn the key to position II and wait for the Audi Multi Media Interface to start.
Load CD1 into the first slot in the CD changer.
Press and hold the SETUP and RETURN buttons.
After a couple of second hidden red menu will appear. Release the buttons.
Go to SWUpdate → CD-ROM. Update CD content will be verified. Audio will mute.
The list of devices ready for the update will appear on the screen. Scroll down to Start download position and confirm the update. This will take up to 40 minutes.
Once the update is complete, you will see the update status. Scroll down to restart the MMI and press it. The system will reboot and return to normal operation.
Remove the first MMI 2G Software Update CD from the CD changer.
MMI 2G software update bluetooth
This is only required if your car is equipped with a Bluetooth hands-free system.
Perform the update procedure twice using CD2.
You must do this twice when the first update procedure removes the memory of the Bluetooth device. it will actually install the new software the second time you run the CD2 update.
From where did you get the file to upgrade the mmi?
Do not you need to enter Сd chnanger (0x0102) in the settings? For some reason, I just don't see Cd chnanger (0x0102)
thank you my friend, eve tho i didnt understand a word it was a better video than all the english ones, thank you so much it worked for me
A small question. I have Audi A6 C6 but when I press on phone button on screen it says Telephone is not installed. So am thinking if I’ll update with them CD you sharing if it will fix this ? And in what format CD should be burned ?
Whats new in this update vs the before?
Hello , thank you for video , i made update from 2007 to 2018 maps i remove old original DVD and upgraded to 2018 , upgrade is sucefully but how i change voice language sat navi ? i mean 》 after 500 meters turn the right ...i have in english i would like use Czech ... i cant find location where to set up ... thank you ....
I put the dvd in the cd charger but some error CD cannot be read , I use original MMI dvd help me plz .. need 2 dvd ?
Hm... no way to read DVD in CD drive. Something is wrong with your original DVD
Здравей имам проблем със радиото изписва ми че радиото не е инсталирано може ли малко помощ
Сd chnanger (0x0102) no, what should I do?
Не знаю / I don't know
@@vesselinv Do you need to put a dvd navigator in the trunk?
@@user-pv1zz6rj8v My CD changer was in glove box. In the trunk was just navigation module and the navigation DVD. Unfortunately I can not check anything because I sold my Audi few years ago.
@@user-pv1zz6rj8v If you are in USA use the 2 USA discs, if you are in EU use 3 EU discs!
Can u please , send a link for the update site
Thx
Unfortunately a6retrofit.com is not working... I don't know whats happened.
Anyway - I uploaded the CD's on my Google disk. Here is the link:
drive.google.com/open?id=1CzF5aZ-ld2pttkKlIBmh4ct9iUDFuyhO
there is 3 content to download should which one is the right or shiould i download all
Does this work for a 2005 Audi?
Mine was exactly 2005
Zasto nema na koji broj davas pozovem pitam i porucim sta zelim da kupim .molim vas objavite broj telefona za svenas hvala jova
Братле , записах ъпдейта на 3 различни диска , с 3 различни скорости и всеки път ми дава Download error
Drive error!
Metalinfo cannot be analysed!
Посъветвай ме как да действам ?
Всъщност важното е да се запише на МИНИМАЛНАТА ВЪЗМОЖНА СКОРОСТ, която позволява записвачката. Ползвай дискове Sony, Verbatium. Но винаги има вероятност и самото устройство да е прецакано… все пак е сигурно на 15 години
Hi there. Is this update good for USA or Europe?
I'm sure it's OK for Europe. This is NOT ОК for the cars, made for United States.
For more information see:
a6retrofit.com/blog/2015/01/14/mmi-software-update-4f0-998-961-4610-4-6-10-americas/
So I eject all the discs from the charger, insert cd1 in slot 1, cd2 in slot2, cd3 in slot 3 (all in the charger cd) and then just press the sw update? Please be more explicit! Thank you in advance!
Actually you have to insert cd1 in slot No. 1. After the system finishes with cd1 you should insert cd2 again in slot 1 and so on.
Thank you for reply!
Vesselin Vassilev where can I buy this DVD ?
@@zm6202 , this is no DVD, but 3 CDs. May be you can update your software in nearest VW-Audi service. Other variant is to download from this location:
drive.google.com/drive/folders/1CzF5aZ-ld2pttkKlIBmh4ct9iUDFuyhO
to write it on CDs and do the update yourself.
@@vesselinv at what speed i must burn cd in my pc? 10x 16x 8x?
hi there could u share link to download this update and let us know how to copy it in cd , example is it in zip format in cd ?
Abhishek Gupta , it seems the web page, where I downloaded the update is not working now. Read the previous comments - you will find the link to a6retrofit.com site. Try to browse it after few days. There is a link where to download the update, and instructions how to do it.
А как се активира парктроника можеш ли да помогнеш?
mine says cd cannot be read... any help?
Had the same issue. You have to burn the file on to a CD-R.
Hey vassilen..
Can you help me to repaier mmi ? Ist totaly Dead. Nothing work anything,Radio,Navigation,or cd.
Thank you in Advance👍
Qaisar Khan , so sorry, but I am not an expert :( may be you should ask any advanced diagnostic specialist.
Ok ill chek..Thank you man
Qaisar Khan
Zdr Brat, imam si6tiya aftomobil audi a6 c6 moi 2g, i iskam da vlizam v zelenia parametir kideto ima aktivirane na blouthouth et takivi o6te ne6ta ama gledah v mnogo video kak go pravat ama s moya aftomobile ne Stava, prosto ne stava be moje bi traybva sa natiskam drugo ne6to ili ne6to tokova, gledam fi te natiskat car i setup, ili pak ima nyakoi natiskat car retourne, a ba vsi4ko probvah ama neznam ve4e kvo da naprava, ako moje6 da mi pomogne6 6e ti sam mnogo blagodaren
За да се активира инженерното меню ти трябва VCSD. В 7-ма група, адаптация, параметър 8 стойността от 0 се прави на 1.
Ето видео на руски:
ruclips.net/video/xSHwrfkqi6Y/видео.html
please help me
I got a cd cannot be traded error any help
I don't understand. What error?
Vesselin Vassilev when I hit SWU UPDATE I GET "Error CD cannot be read"
It seems that you have a problem with the CD. When you write discs on your CD drive on your computer the speed should be MINIMAL possible - 8x, 4x or 2x. CD should be finalized too. It is important, that CD's have to be with good quality - Sony or Verbatim (for example).
If this not help may be your CD player or changer is malfunctioning. Try inserting disk in different slots?
shamarr graham
Vesselin Vassilev where can I get the Info for the cd and where do it go
How you get your CD's? Did You write them on PC, borrow from friend or bought from dealer?
Hi , i can not download the cd 2 because it saying " no device selected for updating " can you help me please
Unfortunately I does it almost 4 years ago, and can not remember what this message means. In my case everything was as it's shown on the clip. May be you should ask for answer Google?
i know it 1 year later, but this happend to me also, no device selected, i believe from the research i made that you dont need cd 2 unless your car has navi and other stuff that my car does not have, i did cd 1 and cd 3 after.
Moze za AUDI Q7???
Most possibly
Този ъпдейт работи ли за Audi A8 D3 2004 модел? Благодаря предварително за отговора ;)
Soufl3x , не е важен модела на колата, а модела на MMI. Ако твоят интерфейс изглежда като този от клипа, значи си с 2G и ъпдейтът е подходящ за теб.
Vesselin Vassilev може ли да ми дадеш телефонен номер на лс да ти изпратя снимки?
Soufl3x изпрати ми на veselinv@hotmail.com
Vesselin Vassilev този ъбдеит от каде може даси го купя за моето ауди
На мен ми пише Cd cannot be read
On CD2, it stuck on Handyvorb2 - Status: Initialise the device, over an hour, nothing...
You have to run cd2 twice!
Now you can download CD images from:
drive.google.com/drive/folders/1CzF5aZ-ld2pttkKlIBmh4ct9iUDFuyhO
Do you also have (USB) update for Audi A3 from 2013?
Sw version MSTD_AU_P2440
Navigation version 8V0919866B 0036 ECE 2014
thanks in advance
No
Thanks man
a6retrofit.com/mmi-software-update-4l0-998-961-5570-5-5-70/
Download and write CD's
Follow the instructions.
Erorr mi izliza