It actually shows 0.00 of humidity and temperature, the screen brightness would lower and it seems like the sensor heats up so much that it started to melt the plastic shell (when it was plugged in, idk why because it's the same sensor) Edit: I found out that it was the wrong pinout (it seemed pretty obvious because it was heating up), the PCB didn't indicate what were the pins so I had to look for the pinout on the website that sells them and after connecting the right cables it worked
Looks like you have done a mistake with the power connections... Please check if you are using the right sensor... If it is a different Humidity Module, then you might have to check power specifications.
Hi, I wanted to build a small weather station with the Arduino uno R3, a 2.8 SPI TFT display and a SHT35 sensor, can it work or is it better to use an ESP32 ? Is there a box on the market to fix the 2.8 display and the Arduino ?
Where we can find the code
Great video! Very simple and well explained! Thank you :^)
It actually shows 0.00 of humidity and temperature, the screen brightness would lower and it seems like the sensor heats up so much that it started to melt the plastic shell (when it was plugged in, idk why because it's the same sensor)
Edit: I found out that it was the wrong pinout (it seemed pretty obvious because it was heating up), the PCB didn't indicate what were the pins so I had to look for the pinout on the website that sells them and after connecting the right cables it worked
Check connections... Something is loose somewhere
Looks like you have done a mistake with the power connections... Please check if you are using the right sensor... If it is a different Humidity Module, then you might have to check power specifications.
@@ElectronicsSimplified7 Yea it was different but as I said in the comment (edit) I found out that it had a totally diferent pinout
Can you scratch the lcd and display it on a lap?
You can use serial monitor to view the status
Hi, I wanted to build a small weather station with the Arduino uno R3, a 2.8 SPI TFT display and a SHT35 sensor, can it work or is it better to use an ESP32 ? Is there a box on the market to fix the 2.8 display and the Arduino ?
Well explained sir😊
♥️
@ElectronicsSimplified7 how to set up in a box can you please help doing the same project
but my lcd is not on and not showing any text
How to put this set up in a box ?
Use your creativity. As long as the sensor is exposed to the surroundings. And the rest of it can go in the box. It will do the job.
@@ElectronicsSimplified7 ok thanks
MAGIC!
keep on going!
Yes.
New Video coming soon
@@ElectronicsSimplified7 cant wait!!
Very cool, thank you! Does it show the temp in Celsius or Fahrenheit?
You can do the changes in the code if you want any other SI unit
For the current project its °C
it just shows 0.00 on humidity and temp?
Please check your connections if they are correct and check that the wires are not losely connected.
@@ElectronicsSimplified7 they are all well connected.
do you have research paper of it .
I have on other articles. But this is just a part of my hobby.
Could you please share the article for this project
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
here you go Ajay. Cheers!
@@ElectronicsSimplified7 Thank you so much sir
Sorry, but where is the code. Thanks
bro I mean when I upload the code. then led is showing humidity : 0 and temperature:0
there are no real number coming.
2 cases:
1. Your DHT sensor is not connected properly (check for lose connections)
2. Your DHT sensor is gone bad.
@@ElectronicsSimplified7 ok bro got you thanks for the help
BRO AT THE END. MY. DISPLAY IS. SHOWING 0 0 ON BOTH LINES CAN YOU TELL ME WHATS AN ISSUE
Reduce the contrast of your display by turning the potentiometer at the back of your I2C
bruh same
Can you send the code sir
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
www.electronicssimplified.in/feed/mini-weather-station-using-dht11-and-lcd-16x2-interfaced-with-arduino/
Where is code?!?!
Code is the description
Could you please share the circuit diagram to clearly know about the connections
drive.google.com/file/d/1NNU1yc-Pb-TZh4PHgEzcD3Rqf0XBLLfN/view?usp=drivesdk
Sir getting error sir
What's the error?
kyu re kayki alas
coding
my lcd is not on and not showing any text