Welding Symbols Session 2 (Both Sides/ Weld All Around/ Field Weld/ Supplementary Symbols(Tagalog)

Welcome to my channel I do vlog a mix of Biking/ Fishing/ Welding tutorials and reviews.
Sa ikalawang bahagi pinapaliwanag naman dito yong Both Sides, mga Supplementary Symbols, All Around at Field Weld .

[@Dazielkim]

Very informative sir, lalo na ngayon nag aaral ako ng welding.

[@Dazielkim]

Kung mag aaral man ako gusto ko ikaw mag tuturo sa akin hehe

[@Je-Welds]

Maraming Salamat , maraming magagaling dyan stin..

[@johnlorentobato3131]

salamat sa paliwanag Idol malaking tulong

[@Je-Welds]

maraming salamat din syo

[@jhajhaboac-yb9hg]

Boss thank you po for your information, very impormative, keep going boss..

[@Je-Welds]

maraming salamat , weld safe

[@ariestoledo6799]

Good day ser..
Ako po madami g gustong matutunan sa inyo.. god blessed po..

[@Je-Welds]

Maraming salamat sa pagtiwala, subaybay lang po humahanap lang ako ng tyempo, weld safe

[@MelvzRepzTV]

Thank you sir god bless po

[@Je-Welds]

thank you...

[@jhoncarlorubi5404]

Maraming salamat sa kaalaman sir

[@Je-Welds]

thank you

[@AngelitoTuboran-pq3ox]

Thanks idol Dami ko natutunan

[@Je-Welds]

thank you..weld safe!

[@williamjarito5582]

Sulit sir ganda ng explanation

[@Je-Welds]

Maraming Salamat''

[@TotongRojo]

Thank you Boss sa pahturo 😊

[@Je-Welds]

salamat din

[@emilyanfone7086]

Thanks sa kaalaman idol..

[@Je-Welds]

Maraming Salamat

[@ronaldenriquez9440]

grabee sobrang galing magturo at magpaliwanag , dami kong natutunan ngayon , salamat ! tuloy lang boss ! THANKYOUUUU

[@Je-Welds]

Maraming Salamat sa positibong komento, Weld safe

[@markmaravilla]

Salamat po galing nyo po mag paliwanag.

[@Je-Welds]

Maraming salamat

[@reinajeananoylo2054]

Thanks po dagdag kaalaman po more to come

[@Je-Welds]

thank u...

[@ariestoledo6799]

Sana po mabigyan nyo pa po Ako Ng madaming tutorial.

[@Je-Welds]

Pwede mong panoorin ang playlist piliin mo lang kung alin ang hinahanap mo, weld safe

[@reginereybautista9158]

Sir ano naman po yung counter sink for plug welds?

[@Je-Welds]

Cunter sink for a plug weld involves preparing a hole by beveling its edges to allow for better fusion and penetration of the weld material. Here are the key steps for creating a countersink for a plug weld:
1.Drill the Hole:
Drill a hole of the appropriate diameter for the plug weld in the top piece of metal. The size of the hole depends on the thickness of the metal and the requirements of the weld.
2.Create the Countersink:
Use a countersink bit or a larger drill bit to bevel the edges of the hole. The countersink angle is typically around 90 degrees, but this can vary based on the specific welding requirements.
Ensure the countersink is deep enough to allow the weld material to penetrate and fill the hole adequately, ensuring strong fusion with the base material.
3.Clean the Area:
Remove any debris, oil, or oxidation from the hole and surrounding area to ensure a clean surface for welding.
Align the Parts:
Position the top piece with the countersunk hole over the base piece where the plug weld is to be made. Ensure proper alignment and secure the pieces in place.
4.Perform the Plug Weld:
Weld the hole, starting from the center and moving outward to fill the countersink completely. Ensure proper penetration to achieve a strong weld.
5.Inspect and Clean:
Inspect the weld for any defects or insufficient fill. Grind and clean the weld as necessary to ensure a smooth surface.
This preparation ensures the plug weld has adequate material for strong fusion and helps avoid issues such as weld porosity or weak joints.

[@haymztv1885]

Link for part 3 po

[@Je-Welds]

ruclips.net/video/XAZVQgKbeGU/видео.htmlsi=ZmPL_PD6hKHC7PzN ....session 3
ruclips.net/video/nvxGVEEtdNo/видео.htmlsi=c3MNzWx1xizfbyL3 ...session 4
ruclips.net/video/lFfW941842w/видео.htmlsi=sf3xm2Uzr9t_LD2C...session 5

[@bonixmachineworkz6379]

sir..may video kaba..mag kabit ng wire sa fcaw? anu po pala pinagkaiba ng fcaw at ng mig weld sir?

[@Je-Welds]

ruclips.net/video/YFMjqOWv14s/видео.html

[@Je-Welds]

Paki watch nlang dito bka sakaling may mapupulot ka. Weld safe.ruclips.net/video/UdEH_d-JKOg/видео.html

[@Je-Welds]

ruclips.net/video/Y2nk5Zpc_2A/видео.html

[@user-to6eq8nm5g]

Sir yung mga symbol po Ba na nabanggit yun po Ba yung mga common na tinatanong sa interview?

[@Je-Welds]

Yes po

[@redraider8891]

Sir tanong ko lang po yung sa butt weld may 3mm gap at 60 degress wla po bang symbol para sa landing o ilang mm or automatic narin po bang 3mm...salamat po...

[@Je-Welds]

Salamat sa tanong ..yong landing o root face ay depende na kung anong welding process at welding position kung may backing plate o wala kung uphill o downhill weld kapag downhill minsan wala ng landing o root face lalo na kung may backing plate.

[@redraider8891]

@@Je-Welds....ok po sir...salamat po....god bless ....

[@CBMoto.]

ano messenger mo sir

[@Je-Welds]

Jenier galarpe

[@MariaJudylynNolCabarles-be5mt]

Idol anung name mo sa facebook

[@Je-Welds]

Jenier Galarpe, thanks