I'm a Solidworks guy trying to learn Creo, and this helped a TON with learning the assembly process. I already knew how to make parts, so it helped having pre-made parts so I didn't have to spend large amounts of time making parts just to learn how to assemble them.
Hello Ivan, Creo educational version files are specifically wrtitten to not be opened in a full version. PTC does have an Import Translator but i believe it's an extra cost for corporate use. Just import my Inventor 2014 Exercise 5 files into Creo. It should work.
I tried that one but didn't work either. It said something went wrong with the Inventor pro license. However the IGES files worked. Thank you for uploading those!
Hi community, i'm gonna be honest. I'm doing the tutorial in my free time at work. But since i got a work license, i am not able to open the files :( What can i do? Do you guys know a please where i can find the files, but not for the student'
Great tutorial, thanks! But when I tried to save the file, I saved it as a copy and when I reopened it, it said some components failed to regenerate and I lost most of the parts which I had assembled? Any idea what happened there? How can I avoid that in the future?
Hi, I am learning creo parametric 2.0 with your exercices. For me, I learn very well with them. But, I try to learn with exercice 5 but how do you find the parts for the assemble? Thank you
OK, I already found it, but I have another problem, I tried to assemble a part and it says it's impossible because that part is created in the educational version and it isn't compatible, could you tell me how to solve it?
Hi, thanks for video..But once i un-tick the (Allow Assumptions) during assembly the second part. The msg (Not Fully Constrained) shown and i can't complete the assembly before using the (Drag Component) function.
I tried to migrate the file and this came up ! "The file was created with an educational version of Creo Parametric and is not compatible with the version of PTC creo Parametric you are running"
hello I'm just learning creo 2.0 from your videos. And I want to thank u. You are telling very good. But I have a problem. When I try to open exercise 5 parts there is '' .... was created with an educational version of creo parametric and is not compatible with the version of creo parametric you are running''. So is there any solution about this problem. Thank u.
Hi vertanux1 I was having the same issue as Ivan el Grande and followed your instructions to download Inventory 2014 Exercise 5 files (.ipt and .iam format) however when opening those files i get an error stating "Inventor License Error" please help. Thanks
vertanux1.com part files has all the files available. I'm sorry Eddie. I don't know why Inventor is not opening your files. Try Autodesk technical support..
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Great tutorials. I learned more here in 4 hrs than what i learned from my teachers at college. Thanks a Lot!!
I'm a Solidworks guy trying to learn Creo, and this helped a TON with learning the assembly process. I already knew how to make parts, so it helped having pre-made parts so I didn't have to spend large amounts of time making parts just to learn how to assemble them.
wow you are the best creo teacher i have ever seen! thank you very much!
Im a solidworks guy ! your videos really saved me .. Thank you , please keep doing this !
thank you very much @vetanux1 . its a great experience here on your channel. your teaching methods are great.
this is my channel ruclips.net/channel/UCCZOJPqHJqQt76UO8tsegBA?view_as=subscriber
thank you so much, your videos are great instruction for us
Hello Ivan, Creo educational version files are specifically wrtitten to not be opened in a full version. PTC does have an Import Translator but i believe it's an extra cost for corporate use. Just import my Inventor 2014 Exercise 5 files into Creo. It should work.
I tried that one but didn't work either. It said something went wrong with the Inventor pro license.
However the IGES files worked. Thank you for uploading those!
Great tutorials I learn more modelling process
Great tutorials. Where is the location of the part files?
you are great, thanks very much!
thanks. the tutorial was helpful. Please consider a tutorial on involute gears..
Great tutorilal , thanks very much , can you please consider a tutorial on gear \ worm drive mechanism , i was not able to find any on youtube
Hi community, i'm gonna be honest. I'm doing the tutorial in my free time at work. But since i got a work license, i am not able to open the files :(
What can i do? Do you guys know a please where i can find the files, but not for the student'
having the same situation
Good job
Great tutorial, thanks! But when I tried to save the file, I saved it as a copy and when I reopened it, it said some components failed to regenerate and I lost most of the parts which I had assembled? Any idea what happened there? How can I avoid that in the future?
Hi, I am learning creo parametric 2.0 with your exercices. For me, I learn very well with them. But, I try to learn with exercice 5 but how do you find the parts for the assemble? Thank you
If I were to add this assembly into another assembly will it also rotate?
OK, I already found it, but I have another problem, I tried to assemble a part and it says it's impossible because that part is created in the educational version and it isn't compatible, could you tell me how to solve it?
where can I find the parts for the assemble?
Sir these files are not opening please tell me which medium i used to open these files.
Hi, thanks for video..But once i un-tick the (Allow Assumptions) during assembly the second part. The msg (Not Fully Constrained) shown and i can't complete the assembly before using the (Drag Component) function.
your tutrials are so good. it helped me a lot. thanks for doing this. can u do the same for unigraphics NX 10?. please, make it to. and thanks a lot
I tried to migrate the file and this came up ! "The file was created with an educational version of Creo Parametric and is not compatible with the version of PTC creo Parametric you are running"
with this type of assembly, if one part is modified (size), the other parts get modified automatically??...as in video 10?
not able to find the assembly part , please guide me where ican find this part
Muhammad Shariq Abbas - the parts are availble at vertanux1 com
vertanux1 . 3rd
but unofrtunately the autocad or solid works parts in not opening in m y creo2.0
+vertanux1 How to create the parts?
vertanux1 com - part files
parts uses in this assembly session should be in creo e1-e4 for better understanding.
nice one
hello I'm just learning creo 2.0 from your videos. And I want to thank u. You are telling very good. But I have a problem. When I try to open exercise 5 parts there is '' .... was created with an educational version of creo parametric and is not compatible with the version of creo parametric you are running''. So is there any solution about this problem. Thank u.
Try downloading and importing either Inventor, SolidWorks or NX versions.
Hi I have tried opening all other part files as well but still its not opening, Help me..
I only have educational files, that will not work with a full license. Have you tried the IGES?
Hi vertanux1 I was having the same issue as Ivan el Grande and followed your instructions to download Inventory 2014 Exercise 5 files (.ipt and .iam format) however when opening those files i get an error stating "Inventor License Error" please help.
Thanks
Hi Eddie, Try importing the SolidWorks, Creo or NX Exercise 5 files and using them.
vertanux1 HI , i couldn't fine the files. It would be a great help if you provide me the link to download the files for assembly .
vertanux1.com part files has all the files available. I'm sorry Eddie. I don't know why Inventor is not opening your files. Try Autodesk technical support..
download link:
vertanux1.com , go to files part and then exercise 5 parts
could help me in pro eng drawing ???
can someone give me the downloadlink to the parts i couldnt follow his voice in the video^^
ah it s his name sry i got it :D