Dyson V11 - How to clean the filter

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • The video shows how to best clean the filter of your Dyson V11 with tap water. The Dyson V11 is the top model of the Dyson cordless vacuum cleaners.
    1. Turn the filter holder counterclockwise. 2. Slide out the filter from the handle. 3. Knock off the most giant pieces of collected dust. 4. Rinse the entire filter in lukewarm warm tap water. 5. Let it dry overnight until dry inside. 6. Mount back by turning counterclockwise.
    Good luck! It's a straightforward job.
    FYI: I seldom recommend people to purchase things, and the whole point of this video is 'do-it-yourself.' In this case, I admit that I bought a spare set of 2 filters for 20 dollars because it allows me to finish my vacuum cleaning without having to wait 24 hours for the wet filter to dry.
    amzn.to/3Ldidsh
    The link takes you to the correct part number (Replace Part # 970013-02 ) for Dyson V11 Animal, V11 Torque Drive V15 Detect Cordless Vacuum.
    #ad #dyson #cleaning #diy #amazon
    Disclosure: As an Amazon Associate I earn from qualifying purchases.

Комментарии • 73

  • @williamwebb7917
    @williamwebb7917 14 дней назад +1

    Great, thank you for the cleaning demonstration. Yours is the easiest one I found on RUclips. Much appreciated.

  • @patriciacz8622
    @patriciacz8622 3 года назад +7

    So this morning my dyson v11 is getting its first filter bath. Thank you for the instructions!

  • @gmc8810
    @gmc8810 Год назад +1

    Thanks for the tip! I just ordered a Dyson v11. Hopefully, the negative comments I have been seeing are very rare.

  • @pusheencat7722
    @pusheencat7722 Год назад +3

    I have a suggestion. I know I"m a bit late. But I use a second vacuum, and I put a brush attachment on it. I then vacuum the filter with that, getting all the large things off. Then, I run it under the water. It works great, and I don't have to touch the dirt :D I do put the vacuum on low power setting so I do not damage the filter.

  • @valentine572
    @valentine572 2 года назад +1

    Your video is way better than the video explanation for the oficial dyson site ! Thank u

  • @kimberlyblaszyk7341
    @kimberlyblaszyk7341 2 года назад +3

    Thank you for the easy step-by-step!

  • @pjfan173
    @pjfan173 11 месяцев назад +1

    Exactly what I needed and thanks for doing this video.

  • @nancycollins8824
    @nancycollins8824 2 года назад +2

    Thank you so so much! 💓 Explanations easy to follow!

  • @adamkaczanowski73
    @adamkaczanowski73 3 месяца назад +1

    Great video thankyou for sharing this 👍💜

  • @JNFGambler24-7
    @JNFGambler24-7 2 года назад +4

    If you are careful you can remove the lower filter from the main body to give a more in depth clean. It is held in place with 2 clips, so carefully locate them and use light pressur from a large flat screwdriver to prize the the clips apart. You need a bit of common sense and a feel of when something may break. If you don't possess both of these requirements then stick to the standard wash.

    • @3vilMTV
      @3vilMTV Год назад +1

      Ah man I can't find any pictures or videos of how to seperate the purple housing from the filters, any tips on where I should be looking out for? Is it the two long pieces that's hanging on one end only?

  • @anthonydownes8525
    @anthonydownes8525 Год назад +1

    I think a powerful air blower is more effective.
    If dust gets wet, it just goes into a soggy mush, harder to remove in my opinion

  • @magnum3550
    @magnum3550 3 года назад +35

    This guy Forgot to say the most important part, you do not put a wet filter back on let it dry for 24 hours minimum then shake the filter if you still see excess water let it dry longer. Never put a wet filter on this will only cause bad smells down the track

    • @Ken_Sweden
      @Ken_Sweden  3 года назад +1

      Here is more to help You:
      ruclips.net/video/0uolTVzlpSo/видео.html

    • @midnightblue131
      @midnightblue131 3 года назад +13

      Listen, at 4:10 he mentions it.

    • @suebean3873
      @suebean3873 2 года назад +6

      He certainly does mention it, he said let it dry for 24 hours.

    • @kimberlyblaszyk7341
      @kimberlyblaszyk7341 2 года назад +3

      I heard him say that! Just listen a little farther along

    • @zlataconnolly2918
      @zlataconnolly2918 2 года назад +3

      It is a common sense NOT to put the wet filter back on😂😂.
      Does he really need to say that?🤦‍♀️😂😂

  • @graceacuna7673
    @graceacuna7673 2 месяца назад

    Thank you 🙏 😊😊😊

  • @crusherlarue6718
    @crusherlarue6718 2 года назад +3

    Great explanation. Easy to follow. Thank you very much!

  • @davidcoen6553
    @davidcoen6553 2 года назад +1

    Bra förklaring!

  • @kenn1936
    @kenn1936 2 года назад

    Awesome tutorial - thank you!

  • @P.C-x5p
    @P.C-x5p 9 месяцев назад +2

    Did you suck up scrabbled eggs 😂😂😂😂😂😂

  • @stackett82
    @stackett82 3 года назад +11

    That’s the nastiest filter I’ve ever seen!

    • @MisterVolts
      @MisterVolts 2 года назад +2

      I have a big dog & 2 birds and mine isn't half as bad, lol

    • @valentine572
      @valentine572 2 года назад

      Oh dear ! You haven’t seen mine ! 😬

    • @kristianelix1632
      @kristianelix1632 2 года назад +1

      Mine was pretty gross too but that’s probably because I vacuum every other day.

    • @kristinak6092
      @kristinak6092 Год назад

      How does his still work????!!!! Mine gets like five particles of dust and it shuts off and tells me the filter needs to be cleaned.

  • @elizabethmartinez2703
    @elizabethmartinez2703 2 года назад +3

    Es increíble la cantidad de agua que desperdicia para el lavado de un filtro de una máquina que, al no tener que reemplazarlo, ayuda al medio ambiente. :(

    • @b.r.9171
      @b.r.9171 2 года назад

      You can give some water in a bowl or small bucket and wash the filter their.

  • @jetli3333
    @jetli3333 3 года назад +1

    Thanks

  • @MisterVolts
    @MisterVolts 2 года назад +2

    Just as a general precaution, one should disconnect the battery pack before doing maintenance on the device. (Coming from an electronics technician)
    Thanks 👍

    • @567CHRISPY
      @567CHRISPY 2 года назад +1

      how do we disconnect the battery pack?

    • @CB-gi6yr
      @CB-gi6yr 2 года назад +2

      This is 100% unnecessary according to the manual.

    • @Ken_Sweden
      @Ken_Sweden  11 месяцев назад

      Yes. Not suppose to do that…

  • @yehlenbumagat9535
    @yehlenbumagat9535 2 года назад +1

    Our dyson v8 doesn't have filter..I don't know f the service guy removed it,,,n I found out only when it wasn't working properly.do u think, it was d reason why it didn't work properly???
    Thanks fbu could answer my question

    • @leelee12123
      @leelee12123 2 года назад

      They have a filter. Look for it on RUclips….

  • @harrymoore6748
    @harrymoore6748 Год назад +1

    After doing all that light says filter not sealed.

    • @Ken_Sweden
      @Ken_Sweden  Год назад

      I've looked at your comment and the only seal that I can see is possibly problematic and frequently replaced is the ‘dust bin top sealing ring’. Google it and you see which one I mean but I think first you best just take apart and reassembly all of it.

  • @VanlilfewithDaleandBailey
    @VanlilfewithDaleandBailey 2 года назад +4

    Don't put you hepa filter back in wet. You will have to get it repaired. FYI. Get a second filter instead.

    • @Ken_Sweden
      @Ken_Sweden  6 месяцев назад

      A link to additional filters on SALE in the description!

  • @stephdaigle2900
    @stephdaigle2900 2 года назад +1

    0:31- U skipped the Part that I needed to learn how to Open up

  • @karaokemawmaw
    @karaokemawmaw 4 месяца назад

    It won’t n open after I put it back together , what do
    I do

    • @Ken_Sweden
      @Ken_Sweden  4 месяца назад

      It's the hinges, let it sit if some dirt is working as glue, and dry it out. Then remember to do firm anti-clockwise and it should slide right off. There are no obstacles or similar in the way.

  • @malin7919
    @malin7919 3 года назад +3

    Shouldn't you rinse the plastic canister too?

    • @MisterVolts
      @MisterVolts 2 года назад +1

      I do!

    • @b.r.9171
      @b.r.9171 2 года назад +1

      Not necessary, as soon you hoover it gets dusty again ..

    • @thegreatujo
      @thegreatujo Год назад +1

      The user manual says the canister should be wiped with a wet cloth. Perhaps there's a reason behind that but they don't explain it further. The bin has a lot of seals and small hatches, sharp corners,etc. Perhaps water droplets can get stuck in some places where they can't evaporate in 24 hours and then the humidity may potentially damage the motor. Just guessing here, I may be wrong.

  • @user-fh2bx6zy2j
    @user-fh2bx6zy2j Год назад

    Can a wait filter damage motor ?
    My dyson is not working after replacing wait filter

    • @Ken_Sweden
      @Ken_Sweden  Год назад

      If you accidentally got water in there, it could be a more extensive problem. I would remove the battery and let it dry for 48 hours before doing anything. Sorry

  • @stephdaigle2900
    @stephdaigle2900 2 года назад +1

    HOW do u Remove that part though?!

  • @Xanduur
    @Xanduur 2 года назад +1

    I bought a second one of these filters so I don’t have to wait 24 hours to dry.

    • @Ken_Sweden
      @Ken_Sweden  6 месяцев назад

      Check link in description for SALE on extra filters

  • @toninosweden5217
    @toninosweden5217 3 года назад +4

    Can it be washed in the dishwasher?

  • @MoEliq
    @MoEliq 4 месяца назад

    Ecco perché io pulisco il filtro ogni tre mesi

  • @sofnaji
    @sofnaji 2 года назад +2

    Step 1 Wear gloves and a face mask

  • @NightmareCrab
    @NightmareCrab Год назад +1

    almost meme worthy video