Ещё бы оно соответствовало прямому назначению.То что он делает - явно что то странное. Такой паз делается фрезой на фрезерном станке. Деньги вроде есть у товарища,а вот на даже ручной фрезер не додумался раскошелиться.Даже с ручным фрезером выйдет быстрее.
Maybe... but you can buy 12" radial arm saws USED all day long for 250. Do your homework, watch and be patient, and you can get a 14" Delta for 200 like I did.
@@theprojectproject01 $200 huh? But how much more did you spend to replace all the bearings and bushings? I agree you can find some deals buying used equipment. Most people aren't going to do that. They are working some one-off project and need to know the best way with what they have on hand. For most people, that means a circular saw and/or possibly a portable table saw. Even I, as a contractor, don't have a shop full of stationary equipment.
Imagine if this dude was a cook making hamburgers. Hands down This man Would be asked to do every single McDonald’s Commercial. Excellent Presentation This is Hard work AND dedication.
Justo alguien lo dijo, esto es arte, podrán decir que es por la maquinaria, pero ser tan perfeccionista y usar toda esa tecnología así y hacer cosas con algo tan noble como la madera es una genialidad sin igual. Siempre es tan satisfactorio ver tus trabajos
en realidad para mi eso no es arte, eso es solo programar y operar una maquina, ¿acaso el que escarba tierra con una escabadora es artista? El verdadero arte es el que haces con tus manos, espigas a mano, rebajas a mano, usas formones, y claro usas gubias para tallar, haces muebles asi con tus ideas y con tus manos usando pulso, eso es arte creeme
@@VivalavidaLuck Tu idea del arte es demasiado romatica. Es como decir que para que sea arte debes seguir usando tus manos y herramientas del pasado. La herramienta sin la habilidad necesaria no es nada.
@@Artes-orientalesBlogspot por eso mismo no todo el mundo es artista, solo los que consiguen esas habilidades, no estoy en contra del uso de maquinas, yo tambien uso maquinas modernas en mi taller, pero cuando vas hacer algun trabajo significativo, es ahi donde usas tu habilidad de moldear la madera
У каждого свой стиль работы,я например тоже бы просто заштриховал слегка,то что предназначено к выпиливанию.... Оборудование супер! Наверное всю мебель бы сделал своими руками в доме?! А ещё бы такую штуку,которая вырезает на древесине виноградную гроздь,листья,морды львов например,то вообще было такие вещи бы делал!?😮❤
this is high-end state of the art woodworking. normally it's very difficult to get accurate depth dadoes with a radial arm saw and long boards. they need to be perfectly jointed/flat/straight or they'll lift slightly off the table at points and your millwork will not be consistent. in my shop i would use a circular saw with edge guide to kerf out the dadoes and a chisel to finish. and if i had that shop i probably wouldnt do anything
I’d hate to see the destruction if that was to kick back. Awesome job as usual. Looks like a single piece of wood at the end the joints are so perfect.
При выполнении данной работы, больше всего времени ушло на то, чтобы по линейке заштриховать области которые надо выпилить )))
😂😂 Realmente, desnecessário!😊😊
That’s what I was thinking, somebody’s got waaay too much free time!
The dust collection is phenomenal
Thanks!!
I didn’t realize until I saw your comment that shit is real as fuck dawg damn
@@danielinacarp.
Should change name to dustless lumber Co
@@boroklasnja1562 p for piss (urine)
God what I wouldn’t do for a work shop like that, amazing skill, every video is a trip into preciseness, it is truly a pleasure to watch what you make
It almost brings a tear to your eyes when a sharp blade cuts wood so precisely!!!
работа на хорошем оборудовании - одно удовольствие.
😅😅
paha
I think he needs more lines telling him where to cut, seriously?
Не подскажете как называется такой станок?
Ещё бы оно соответствовало прямому назначению.То что он делает - явно что то странное. Такой паз делается фрезой на фрезерном станке. Деньги вроде есть у товарища,а вот на даже ручной фрезер не додумался раскошелиться.Даже с ручным фрезером выйдет быстрее.
This is not woodworking, this is art! Your workshop is a temple of skill.
Looks like a Rockler store. Maybe he makes videos there after hours
You can’t really see his cutting skills this fast, his lines are exactly perfectly perpendicular. Talented man.
You are a great carpenter and you handle tools very wel.
Thanks 👍
С каким довольным лицом человек работает! Круто! Работа должна доставлять удовольствие мастеру!!
что он сделал? что за решетка? работает ради х3рhи для видосиков?
@@eric_nkа какая разница, работа с деревом, работа в кайф, есть деньги на хороший инструмент. И мы с Вами посмотрели, да комментарии оставили)
@@yurievich_workshop как какая, я хочу знать что он сделал и куда применит
@@eric_nk да куда заказчик заказал, туда и применит. То что не показан результат, согласен с вами. Но в целом это приятная и интересная работа.
где тут мастер?
How to create half laps with a $300 dado stack in a $5k saw.
It’s a pro Woodworking shop and the best tool for that particular job. I miss having a radial arm saw.
Maybe... but you can buy 12" radial arm saws USED all day long for 250. Do your homework, watch and be patient, and you can get a 14" Delta for 200 like I did.
@@theprojectproject01 $200 huh? But how much more did you spend to replace all the bearings and bushings? I agree you can find some deals buying used equipment. Most people aren't going to do that. They are working some one-off project and need to know the best way with what they have on hand. For most people, that means a circular saw and/or possibly a portable table saw. Even I, as a contractor, don't have a shop full of stationary equipment.
@@scottsatterthwaite4073 How much? $64 plus shipping. 8 units from Aurora Bearing at $8 per.
The delta doesn’t turn and do 90 degree cuts though. Probably isn’t compatible with a dado set either.
Классная работа,классная техника,великолепное отношение к своим изделиям и процессу!!!👍👍👍
Мечтаю тоже о таком .
Не подскажете как называется этот станок?
You always look like you really enjoy what you're doing. That makes your videos over-the-top fun to watch. 😊👏
I could watch him work for days…so precise…..look at his grin as it all slots into place….he’ll yeah 😊
Когда есть весь инструмент, всё по полочкам и руки откуда надо растут очень приятно смотреть, даже самому попробовать хочется, но недолго😊
Я сам станочник, только по металлу. Я в восторге, от оборудования и от умения, красавчик, всё чётко!!!
Your workshop is so epic. This channel is for dreaming only for me 🥺
A MAN I LOVE WHAT YOU ARE DOING... THAT IS AWESOME JOB BROTHER 👍👍👍👍👍👏👏👏👏👏👏
Imagine if this dude was a cook making hamburgers.
Hands down This man Would be asked to do every single McDonald’s Commercial.
Excellent Presentation This is Hard work AND dedication.
That is an awesome tool for cutting joints, and so clean cut smooth, no chiselling, nothing, just that fancy new blades,👏
Justo alguien lo dijo, esto es arte, podrán decir que es por la maquinaria, pero ser tan perfeccionista y usar toda esa tecnología así y hacer cosas con algo tan noble como la madera es una genialidad sin igual. Siempre es tan satisfactorio ver tus trabajos
Согласен 👍,
en realidad para mi eso no es arte, eso es solo programar y operar una maquina, ¿acaso el que escarba tierra con una escabadora es artista?
El verdadero arte es el que haces con tus manos, espigas a mano, rebajas a mano, usas formones, y claro usas gubias para tallar, haces muebles asi con tus ideas y con tus manos usando pulso, eso es arte creeme
@@VivalavidaLuck Tu idea del arte es demasiado romatica. Es como decir que para que sea arte debes seguir usando tus manos y herramientas del pasado. La herramienta sin la habilidad necesaria no es nada.
@@Artes-orientalesBlogspot por eso mismo no todo el mundo es artista, solo los que consiguen esas habilidades, no estoy en contra del uso de maquinas, yo tambien uso maquinas modernas en mi taller, pero cuando vas hacer algun trabajo significativo, es ahi donde usas tu habilidad de moldear la madera
Я не знаю что это и для чего , но как же приятно и завораживающее смотреть на работу с деревом 😍
Везет тебе мужик.. Так много хороших станков у тебя.
Con éstos vídeos se antoja aprender carpintería 🧐 🤔 😊 👍
I was doing that at age 14 in the garage with my step dad's Craftsman Radial Arm Saw...
In 1977
I have restored a couple old DeWalt radial arm saws. When they are running true and everything is dialed in they are amazing tools.
Nice work. I can tell you're getting more comfortable with your RAS, and your fits are really getting dialled in. Well done.
Asombrarme del arte, su labor y como mantiene la precisión, sin saber nada de carpintería es mi pasión.
That dado stack blade is putting in work.
Thank you for curing my ED. Lol
У каждого свой стиль работы,я например тоже бы просто заштриховал слегка,то что предназначено к выпиливанию.... Оборудование супер! Наверное всю мебель бы сделал своими руками в доме?! А ещё бы такую штуку,которая вырезает на древесине виноградную гроздь,листья,морды львов например,то вообще было такие вещи бы делал!?😮❤
Ну это фантастика! Станки; расходники; материалы. ! Не ужели такое возможно?
That is just poetry in motion!
I never really cared for a radial alarm saw … but now I don’t think I can live without one😮
So clean and smooth! 👏👍
Eres un héroe con la madera, la dominas como si fuera plastilina.
Your vid’s make me smile and dream.
I love watching a master and his machinery at work. There is always something new he's busy on ❤❤
I always tell my wife “with the right tools you can do anything” and she she says “no kidding” 😢
C’est incroyable ce qu’il est possible de réaliser à la perfection et au millimètre quand vous êtes bien équipé 😃
Всегда смотрю его работус удовольствием! Браво!!!
Perfecto amigo Dusty
Блин . Белая зависть задушила 😊
Everything he makes is always amazing...must be appreciated👍👏
Dusty teacher, it is a pleasure to see him work and at the same time learn, greetings from Chile
👏
Very clean and very precise cutting
This guy's shop is another level
That fitment 😚👌👍
How Beautiful was that !
Great work! Love the fast action and no talking. Thanks for sharing.
Que fregón mi guerazo no. 1 de la carpintería fina!!!
His skilz always amazes me,but also he the machinery,very efficient!✊
This is the definition of satisfying! haha what's a man with a new toy!?
Все супер пупер но купить какой инструмент это не реально.....🔥🔥🔥👌👌👌👍👍👍
That's a huge tic-tac-toe board. Nicely made, too...
Idk why, but turning my finger into hamburger meat has really slowed my drive to do woodworking lol
Group sandbox for the crazy cat lady? 😂
El rey de los ensambles!!! Maravilloso maestro
Good drumming at the end!
Отличная работа -👍
Молодець чудова робота 👍👍👍
всегда завидовал хорошему инструменту с таким работать легко и просто
Beautifully clean
Beautiful workmanship.
Essa máquina e meu sonho de consumo, mas seu talento é o melhor brother 👏👏👏👏👏👏👏👏👏🇧🇷
This man is master of equipment
this is high-end state of the art woodworking. normally it's very difficult to get accurate depth dadoes with a radial arm saw and long boards. they need to be perfectly jointed/flat/straight or they'll lift slightly off the table at points and your millwork will not be consistent. in my shop i would use a circular saw with edge guide to kerf out the dadoes and a chisel to finish. and if i had that shop i probably wouldnt do anything
Show parabéns ferramenta top
The tools you use are so mint. I would enjoy the heck out of precise equipment!
المهنة الحقيقية صاحب الخبرة ❤
I've been watching your work for a while now, damn good. Learned a lot, thank you for sharing
Forget radial arm saws, I just stick a dado stack in my sliding miter saw
The precision on those cuts, absolutely clean
I’d hate to see the destruction if that was to kick back. Awesome job as usual. Looks like a single piece of wood at the end the joints are so perfect.
Con esas tremendas máquinas ese man fábrica lo qué quiera
🙌
This guys an artist
Damn I think I just shed a tear...
A finely tuned arm saw 👌🤌 Great work
Freud wood B proud of U !
Love this man's gadgets😂
Tuyet voi ...khi toi duoc su dung chiec may nhu vay ❤❤❤❤
🙌
Boa noite parabéns seus trabalhos e muito caprichado
That's cool that instead of using a motor it creates airflow to spin the blade 😮
Amo sei trabalho!!!
He looks so happy the end ☺️
Your a great machinist
Used to rig my table saw with Dado setup. This is outstanding.
Everyone tells me not to get those saws too dangerous but damn they are cool
Fantastic. Shows what the right tool can do.
Завораживающая работа!!!
完璧👌ですね👍見てて気持ちイイ😊
Estos videos me hacen dar cuenta de lo jodido que estoy...chale ya quisiera pa un serrucho de costilla😢😢😢
i loveeee this man’s work
What the saw dust and wood chips, me Seeing this Saw Blades combination for the first time!
Кайфую от его работы и инструментов
С таким инструментом работать одно удовольствие.
Is anyone else not just terrified of radial arm saws??? I mean, I've never used a nice one like this, but those things just make me worry. Lol
Love this guy!!!!!! 😊
Я понимаю,что он придерживает станок и делает нагрузку на руку,Но!! При вращении пилы от себя и движение станка должно быть от себя!!
Nhìn dàn máy thấy thích quá cảm ơn bạn đã cho xem clip này
the best wood working in the world..👍👍👍
Que excelentes trabajos ❤ saludos desde tegucigalpa Honduras