Bucklos 25.4/31.8mm Handlebar Aluminum Alloy Riser Bar. link www.ebay.co.uk/itm/154874569981?ssPageName=STRK%3AMEBIDX%3AIT&var=454989115527&_trksid=p2060353.m2749.l2649
Looks so much better with the new bars. I’m searching for a folding e bike and it’s so confusing with the amount out there. I’m 6ft so I need one that will be comfortable for my height.
Are they wider bars ? Make some difference ive similar on a m21pro Bigger battery and controller the motors in them can do so much more as u probs know by now 👍@@dan9283
How much slack was on the cables ? would love to get some higher bars on my M1, I feel like I’m leaning over the handlebars too much as I have the seat quite high
There's not that much, maybe 2 inches, A lot of people change the handle bars and stem for BMX type and that gives them more reach, but I think you may need to replace some of the cables, if you join this group, there's loads of ideas and info facebook.com/groups/847976069396641
Bucklos 25.4/31.8mm Handlebar Aluminum Alloy Riser Bar. link www.ebay.co.uk/itm/154874569981?ssPageName=STRK%3AMEBIDX%3AIT&var=454989115527&_trksid=p2060353.m2749.l2649
Im looking at putting some 75mm higher bars on my m21 (when it turns up) do you think the cables will be long enough or do you think I might have to buy longer cables?
@@dragon-rides I've seen a few putting bmx bars on. But apart from the look I dont see the point as they are still at the same hight as the original bars. But I think some a bit wider and higher by 75mm would look good. And unlike fitting the bmx bars. I should still be able to fold them down to transport in the car
@@dragon-rides struggling to find some better bars to fit. Where did you get yours? And how wide are they? They do look much better than the standard straight fiido bars
@@dragon-rides fitted the same bars as you did today. Feels much better to ride and definitely improves the look of the bike. Going to fit a better rear shock next and hydraulic calipers are on order
I'm thinking of doing the same, but with bmx handle bars for a bit more height, good video as always.
I installed a 12cm rise bar and it is working fine. No re wiring needed.
Good 'how to' but no detail about the bars ...... what size (diameter) are they at the centre clamp ? Do you have a link ? Thanks
Bucklos 25.4/31.8mm Handlebar Aluminum Alloy Riser Bar. link www.ebay.co.uk/itm/154874569981?ssPageName=STRK%3AMEBIDX%3AIT&var=454989115527&_trksid=p2060353.m2749.l2649
Looks so much better with the new bars. I’m searching for a folding e bike and it’s so confusing with the amount out there. I’m 6ft so I need one that will be comfortable for my height.
get the M1 pro its great
Im 5.8 The bikes fine but the handle bars you may find a little low at 6' You can get the parts to make the higher but its a bit work
@dragon-rides how would you make the handlebar higher for a 6ft person? Definitely find its an odd riding position.
Thank you
Are they wider bars ? Make some difference ive similar on a m21pro Bigger battery and controller the motors in them can do so much more as u probs know by now 👍@@dan9283
Just done the same thing. 50mm riser bars from Tredz.
Awesome! What do you think would be the maximum rise keeping the original cables?
How much slack was on the cables ? would love to get some higher bars on my M1, I feel like I’m leaning over the handlebars too much as I have the seat quite high
There's not that much, maybe 2 inches, A lot of people change the handle bars and stem for BMX type and that gives them more reach, but I think you may need to replace some of the cables, if you join this group, there's loads of ideas and info facebook.com/groups/847976069396641
Hello,
If I change the handlebar to gain height, what is the maximum height that can be mounted without changing the length of the cables?
no idea on the max, but I recon about 5cm
I just got my M21 yesterday, & definitely need to replace the handlebars, way too narrow, what's the replacement size 31.8mm?
Bucklos 25.4/31.8mm Handlebar Aluminum Alloy Riser Bar. link www.ebay.co.uk/itm/154874569981?ssPageName=STRK%3AMEBIDX%3AIT&var=454989115527&_trksid=p2060353.m2749.l2649
@dragonrides Is the middle section 25.4mm or 31.8mm? Many thanks, Gwen
Im looking at putting some 75mm higher bars on my m21 (when it turns up) do you think the cables will be long enough or do you think I might have to buy longer cables?
I recon you might just get away with 75mm. Id be interested to know if they work ok
@@dragon-rides I've seen a few putting bmx bars on. But apart from the look I dont see the point as they are still at the same hight as the original bars.
But I think some a bit wider and higher by 75mm would look good. And unlike fitting the bmx bars. I should still be able to fold them down to transport in the car
@@dragon-rides struggling to find some better bars to fit. Where did you get yours? And how wide are they?
They do look much better than the standard straight fiido bars
@@maxv77 There's quite a few on eBay and Amazon, search for Bucklos 25.4/31.8mm Handlebar Aluminum Alloy Mountain/BMX Cycling Flat/Riser Bar
@@dragon-rides fitted the same bars as you did today. Feels much better to ride and definitely improves the look of the bike. Going to fit a better rear shock next and hydraulic calipers are on order
Great video! One question: My m1pro do some crack noises in the back when I am on... I think that is normal mechanical sounds, this is normal?
Check the wheel spokes, may need tightening
I had the same issue on my M21 and it was the wheel spokes. Halfords true'd the wheel for me and it sorted the problem. it's only £10
Thank the two so much, i checked my bike and one spoke is missing...
What handle bar did u get ? What re the dimensions
25.4 630mm
What make are the handle bars dude
Bucklos 25.4
Is the bike legal in UK?
I think it depends on where you use them. I'v had no issues