Yes seen this happen with other explorer where the bad coil will interfere with the ecu and transmission module... best to scan to pin point the issue tho
Hey I have a 07 Ford Explorer my wrench was on I changed the clutch pedal sensor and the throttle body, the wrench going off running great I hope it helps you
Hey bud I done a typo sensors not a clutch pedal sensor itself just a plain old throttle pedal sensor you get you got it now I know it's going to help you
I have a 08 , it just started making weird wind noise then I guess it went into limp mode so I pulled over and cut it off and waited like 5 mins and now it just doesn’t move at all
I replaced my PCM and it fixed that issue but I was still having problem with it dieing at idle so I replaced the fuel rail pressure sensor and its been fine ever sense hope this helps
For certain models that carry coils all you have to do is change your coils on your left the ones on the side of the ECU.
Yes seen this happen with other explorer where the bad coil will interfere with the ecu and transmission module... best to scan to pin point the issue tho
I had the same problem Change the computer and the Harness And I promise you will fix the problem
I have a 2010 and mine don't have coils only spark plugs wires so I need a solution out there anymore??
Hey I have a 07 Ford Explorer my wrench was on I changed the clutch pedal sensor and the throttle body, the wrench going off running great I hope it helps you
Hey bud I done a typo sensors not a clutch pedal sensor itself just a plain old throttle pedal sensor you get you got it now I know it's going to help you
I'm currently dealing with the same issue on 07 4.0 as well. Any luck locating the problem
My PCM needed replacing
Thank you that's what mine is currently getting replaced on it.
I have a 08 , it just started making weird wind noise then I guess it went into limp mode so I pulled over and cut it off and waited like 5 mins and now it just doesn’t move at all
I have same issue on my 06 explore I’ve change throttle body gas pedal sensor and still the same any solutions out there?
I replaced my PCM and it fixed that issue but I was still having problem with it dieing at idle so I replaced the fuel rail pressure sensor and its been fine ever sense hope this helps
I’m having the same problem on mine it’s 2013 ford explore
My 06 did samething...it was the computer
I have the same issue for the same year.
Replaced the PCM and fixed the issue
@@willnotcomply4144 What is the PCM????
@@willnotcomply4144 Like what does PCM stand for??? Please and thank you....
Electronic control module or pcm.
@@jasonsnider8749 It ended up being the MAF sensor for me...
Mass Air Flow sensor.
Cheap and simple.
Unplug, plug in, and go.
Very easy fix.