Great video, very informative. I only wish I had seen I before I attempted to micro weld, it was challenging to say the least to get the jump ring shut !!
I've been looking for a video that addresses the issue of securing a jump ring so my jewelry doesn't fall apart. Thank you so much for such a detailed and informative video. I'll try to use the Micro Welder in hopes I don't blow myself up. (just kidding).
LOL - you won't blow yourself up with the welder, but I did blow away a jump ring with my flame torch when I was first started soldering and set the flame too high. It literally flew, hit my curtain, then burned my carpet where it landed! It was like something right out of a movie.
I want to buy a welder like the one you use in the video that you talk about welding jump rings. So I was wondering which Orian model you use. . It looks like the model that costs ~ $2000+ .Do you have an extra $2000 you'd like to lend a starving artist? Ok, I'll settle for knowing what welder you have. so, thanks for your advice. I love your videos!
Hi! Thanks for the great video! I am having a hard time with bracelets staying together - lately I got multiple clients saying there bracelets fell off! And I just don't know what I am doing wrong or what I should switch up?
Don't get frustrated - you are not alone, but this is easily remedied. If you haven't already solved your problem after watching my video, I may be able to help with a few quick checklist items. What gauge (or thickness in mm, if you don't know gauge) jump rings are you using? What power setting (assuming you are using Orion, or if you're not, that they're similar in power settings)?
I need help. I'm having a terrible time trying to weld jump rings. out of maybe 30 I've welded 3 of them. I've tried a variety of sizes... I could use some guidance.
Hi! I enjoy your videos! Quick question.. i hear a lot that the ground cable should go on pliers, not the chain or jump ring. I see in most of your videos you put it directly on the jump ring.. can you explain the benefits? Thanks!!
Thank you for watching! Arc pulse welding works by running the current from the electrode to the grounding clip. The farther it has to travel, the weaker it is. The difference is slight, but I have found that I get more secure / stronger welds when I am closer to the seam I'm trying to weld. This is also the way that I was taught by the Orion instructor at a tradeshow booth demonstrating it. It has always worked best for me that way, too.
Thanks for the video! Question- I just got my welder and I was surprised on the stainless steel practice tests how many sparks were flying. Is this normal? I can’t see any sparks in the videos I’ve watched but I’m wondering if the camera just doesn’t catch it.
there are sparks in the video, but not always a lot. I've welded tin and other objects (household fixes) and it does seem some metals spark more than others.
You can use the argon gas - it will reduce the fire scale. Also, you can also help it be less black by keeping your electrode clean (less sooty) by regularly sanding it. It will only minimize, and not completely avoid.
I'm seeking guidance with my new Amazon Jinhu welder for jewelry making. Specifically, I'm having difficulty consistently welding small 2.5mm 14k gold-filled jump rings. Here are the challenges I'm facing: - Settings 1 and 3 often fail to produce a spark. - Higher settings tend to weld the rings but often result in them blowing out. - Other settings occasionally produce a single spark or do nothing at all. - I am not using argon gas (yet) Could you please provide advice on effectively using the welder to permanently join these small jump rings? Any tips or adjustments to settings would be greatly appreciated!
Hello! My apologies, I have never used the Jinhu welder and I don't know how many watts those 1-3 settings produce. I would suggest that you start off with larger diameter (but same thickness/gauge) jump rings and find the best setting. Then reduce to smaller diameter jump rings. WIth tiny ones, you have to have more precision in holding them steady and they're hard to see. As long as they're the same thickness, the same setting will work. As far as setting is concerned, find the setting that doesn't blow out, but might overmelt. If you can consistently weld securely, then reduce the power to the next lower. Practice and make sure you are able to consistently weld, before moving yet lower power. Rinse and repeat. Finally, you will find the ideal setting where anything lower you will not get a secure weld, and anything higher, you'll flat top (over melt). I hope this helps. Dana
I watched several videos on this machine and half the people say they use the argon gas, half of them don't. When is it advisable to use it and when is it not necessary?
if you're doing pop up events, don't. The tank is a heavy set up and take up room. Really, if you're doing permanent bracelets, where you're welding a tiny jump ring, I advise against the add expense. You can remove the fire oxidation with a fibreglass pen (available everywhere) or a white eraser.
I typically just do one weld at 7.5w for 22 ga. I like doing 5w when the diameter of the ring is under 5mm, but sometimes it opens when I use 2 pairs of pliers to twist and try to break the bond. So, although it did weld, it was not a secure long-term bond; it snaps and breaks open again.
Thank you for the video! This was very helpful. What material are the jump rings you are using? I'm working with stainless steel and would love a comparison in terms of recommended wattage :)
I've been able to weld giant washers onto a steel nut. So, it is possible. However, I feel that the aesthetic result would not be as good as solder. It is hard not to leave little pitted marks. Having very high power, high enough to go fuse thick ga wire together might warp it / melt it. It would take more work to straighten. However, if you do not solder, definitely, I'd try the welder.
A spark doesn't necessarily mean that it has welded correctly. Also, no spark doesn't necessarily mean it did not weld securely. The best way to be sure is to try to open the jump ring with two pairs of pliers. You should always test for security anyway - you'll feel more at ease.
depends on whether it is silver or gold filled (gf and solid gold requires slightly more power than 925 silver); also depends on whether it is a very sharp (almost new) or rather dulled electrode ( sharper the lower power you need). In general: 22 ga - 7.5w 21 ga - 7.5w to 10w 24 ga - 5w I will post shortly a video demo on the different metals and wattages, as well as shape of the electrode. Pls stay tuned!
Thanks! I use chain nose pliers - flat ones with short nose (don't buy long needle nose - they give you less control). I find pointed tip easier to see, rather than square nose.
Aside from a decent writer you guys should actually spend some money and hire someone to do your videos that knows what they are doing since I can not see whatever it is you are trying to communicate.
These are the best videos. Every knows what the SHOULD do. But it always makes things easier when you know what NOT to do!
thank you!! I had experienced all of of those mistakes and fails at the beginning.
I love all of these videos. They sets well done and very informative
Glad you like my low budget videos! You've made my day!!!
I didn't know the placement of the ground mattered, too. This is great info thank you
Glad it was helpful!
Great video, very informative. I only wish I had seen I before I attempted to micro weld, it was challenging to say the least to get the jump ring shut !!
Thanks, Bruce. Glad this helped - it's very easy to pick up, though. Good luck with your future projects!
I've been looking for a video that addresses the issue of securing a jump ring so my jewelry doesn't fall apart. Thank you so much for such a detailed and informative video. I'll try to use the Micro Welder in hopes I don't blow myself up. (just kidding).
LOL - you won't blow yourself up with the welder, but I did blow away a jump ring with my flame torch when I was first started soldering and set the flame too high. It literally flew, hit my curtain, then burned my carpet where it landed! It was like something right out of a movie.
@@stonesandfindings Oh Dear!! What model Orian Welder do you use?
I want to buy a welder like the one you use in the video that you talk about welding jump rings. So I was wondering which Orian model you use. . It looks like the model that costs ~ $2000+ .Do you have an extra $2000 you'd like to lend a starving artist? Ok, I'll settle for knowing what welder you have. so, thanks for your advice. I love your videos!
Hi! Thanks for the great video! I am having a hard time with bracelets staying together - lately I got multiple clients saying there bracelets fell off! And I just don't know what I am doing wrong or what I should switch up?
Don't get frustrated - you are not alone, but this is easily remedied. If you haven't already solved your problem after watching my video, I may be able to help with a few quick checklist items.
What gauge (or thickness in mm, if you don't know gauge) jump rings are you using? What power setting (assuming you are using Orion, or if you're not, that they're similar in power settings)?
I need help. I'm having a terrible time trying to weld jump rings. out of maybe 30 I've welded 3 of them. I've tried a variety of sizes... I could use some guidance.
send me an email and I will send you a checklist of what you need to do. No worries - we can rectify this quickly.
Actually, I found that you're our customer and sent you an email already.
Hi! I enjoy your videos! Quick question.. i hear a lot that the ground cable should go on pliers, not the chain or jump ring. I see in most of your videos you put it directly on the jump ring.. can you explain the benefits? Thanks!!
Thank you for watching! Arc pulse welding works by running the current from the electrode to the grounding clip. The farther it has to travel, the weaker it is. The difference is slight, but I have found that I get more secure / stronger welds when I am closer to the seam I'm trying to weld.
This is also the way that I was taught by the Orion instructor at a tradeshow booth demonstrating it. It has always worked best for me that way, too.
Thanks for the video! Question- I just got my welder and I was surprised on the stainless steel practice tests how many sparks were flying. Is this normal? I can’t see any sparks in the videos I’ve watched but I’m wondering if the camera just doesn’t catch it.
there are sparks in the video, but not always a lot. I've welded tin and other objects (household fixes) and it does seem some metals spark more than others.
I’m struggling with a burn look to each jump ring even after wiping it? Also on low Ws any suggestions?
You can use the argon gas - it will reduce the fire scale. Also, you can also help it be less black by keeping your electrode clean (less sooty) by regularly sanding it. It will only minimize, and not completely avoid.
I'm seeking guidance with my new Amazon Jinhu welder for jewelry making. Specifically, I'm having difficulty consistently welding small 2.5mm 14k gold-filled jump rings. Here are the challenges I'm facing:
- Settings 1 and 3 often fail to produce a spark.
- Higher settings tend to weld the rings but often result in them blowing out.
- Other settings occasionally produce a single spark or do nothing at all.
- I am not using argon gas (yet)
Could you please provide advice on effectively using the welder to permanently join these small jump rings? Any tips or adjustments to settings would be greatly appreciated!
Hello! My apologies, I have never used the Jinhu welder and I don't know how many watts those 1-3 settings produce.
I would suggest that you start off with larger diameter (but same thickness/gauge) jump rings and find the best setting. Then reduce to smaller diameter jump rings. WIth tiny ones, you have to have more precision in holding them steady and they're hard to see. As long as they're the same thickness, the same setting will work.
As far as setting is concerned, find the setting that doesn't blow out, but might overmelt. If you can consistently weld securely, then reduce the power to the next lower. Practice and make sure you are able to consistently weld, before moving yet lower power. Rinse and repeat. Finally, you will find the ideal setting where anything lower you will not get a secure weld, and anything higher, you'll flat top (over melt).
I hope this helps.
Dana
@@stonesandfindings Thank you!
SO HELPFUL THANK YOU
Glad it helped!
I watched several videos on this machine and half the people say they use the argon gas, half of them don't. When is it advisable to use it and when is it not necessary?
if you're doing pop up events, don't. The tank is a heavy set up and take up room. Really, if you're doing permanent bracelets, where you're welding a tiny jump ring, I advise against the add expense. You can remove the fire oxidation with a fibreglass pen (available everywhere) or a white eraser.
forgot - please see my video on argon gas for a more comprehensive explanation and result comparison.
How many welds is typically needed for 22gauge 4.3mm?
I typically just do one weld at 7.5w for 22 ga. I like doing 5w when the diameter of the ring is under 5mm, but sometimes it opens when I use 2 pairs of pliers to twist and try to break the bond. So, although it did weld, it was not a secure long-term bond; it snaps and breaks open again.
Thank you for the video! This was very helpful. What material are the jump rings you are using? I'm working with stainless steel and would love a comparison in terms of recommended wattage :)
In this video, I am using 925 silver. I do not use stainless steel, but I have heard that it requires higher wattage than sterling silver.
Great video! Do you think this could this be used to weld thicker wire like 10g for bangle bracelets? Higher temperature and multiple passes maybe?
I've been able to weld giant washers onto a steel nut. So, it is possible. However, I feel that the aesthetic result would not be as good as solder. It is hard not to leave little pitted marks. Having very high power, high enough to go fuse thick ga wire together might warp it / melt it. It would take more work to straighten. However, if you do not solder, definitely, I'd try the welder.
Even if it does spark is it welding correctly ?
A spark doesn't necessarily mean that it has welded correctly. Also, no spark doesn't necessarily mean it did not weld securely. The best way to be sure is to try to open the jump ring with two pairs of pliers. You should always test for security anyway - you'll feel more at ease.
What wattage do you use for very fine jump rings? Also do you use argon?
Hi! I use 5W power. If your electrode is a bit dull and it's not connecting properly, either sharpen the electrode or up the power to 7.5w.
Thank you.
You're welcome! I hope this was helpful.
How many watts would you recommend for jump rings that are 3mm/22gauge, 3.5mm/21 gauge, 3mm/24 gauge and 2.5/24 gauge?
depends on whether it is silver or gold filled (gf and solid gold requires slightly more power than 925 silver); also depends on whether it is a very sharp (almost new) or rather dulled electrode ( sharper the lower power you need). In general:
22 ga - 7.5w
21 ga - 7.5w to 10w
24 ga - 5w
I will post shortly a video demo on the different metals and wattages, as well as shape of the electrode. Pls stay tuned!
Wonderful video! Thank you for the tips. What pliers do you use?
Thanks! I use chain nose pliers - flat ones with short nose (don't buy long needle nose - they give you less control). I find pointed tip easier to see, rather than square nose.
@@stonesandfindings Who makes these or where did you purchase them?
Aside from a decent writer you guys should actually spend some money and hire someone to do your videos that knows what they are doing since I can not see whatever it is you are trying to communicate.
I appreciate the comment, Media Content Creator :)