This is really a great work..that animation of asking students to concentrate might look cheezy but it actually helped me get back on it again, every concept is properly explained and revised properly so that it gets into the student's mind...And video making skills are just too great
There are many MISTAKES in the video.. 1) 4:09 transformer ratio should be Np/Ns 2) 6:41 copper loss equations (is that exchanged with each other) 3) 12:44 check all 4 Equations formulas 4) 14:12 copper loss on Half load calculation R01 should be 12.25 . If I'm wrong then correct me in replies... Thank you.. If you found the same doubt 👇hit LIKE to help others.
Four of the equations on the screen at 12:45 are incorrect, should edit video to show correct equations that you derived earlier and then use in the calculation.
Really good learning video. But R02 = 0,03 + 0,25 * 0,05^2 = 0,03 Ohms solution is correct. W Cu FL => R1 = 0,25 not 0,025 solution is correct. W Cu HL = (0,5 * I1)^2 * R1 (I hope not R01). So (16,66 * 0,5)^2 * 0,25 = 17,35 W not 2,0816 W.
There are many MISTAKES in the video.. 1) 4:09 transformer ratio should be Np/Ns 2) 6:41 copper loss equations (is that exchanged with each other) 3) 12:44 check all 4 Equations formulas 4) 14:12 copper loss on Half load calculation R01 should be 12.25 . If I'm wrong then correct me in replies... Thank you.. If you found the same doubt 👇hit LIKE to help others.
This is really a great work..that animation of asking students to concentrate might look cheezy but it actually helped me get back on it again, every concept is properly explained and revised properly so that it gets into the student's mind...And video making skills are just too great
Thank You Mahima Soota. Please subscribe to our EzEd channel for more such videos
Great video, they could explain at university like this...I have learnt more in 15 minutes than in three months... Thanks!
Thank You +Javier Gutierrez. Please subscribe to our EzEd Channel for more such videos.
There are many MISTAKES in the video..
1) 4:09 transformer ratio should be Np/Ns
2) 6:41 copper loss equations (is that exchanged with each other)
3) 12:44 check all 4 Equations formulas
4) 14:12 copper loss on Half load calculation R01 should be 12.25
.
If I'm wrong then correct me in replies...
Thank you..
If you found the same doubt
👇hit LIKE to help others.
Btw... Knowledge delivering technique in few minutes is unbeatable..
Thank you very much for this explanation and i think there was Inadvertent error at 4:43 that loss is for winding not for core>
You're doing great work...Thank you so much❤️
Ps: I love that animated person... making us to concentrate more..❤️
at 6:41 the copper losses you wrote for the two cases .were they correct, please check it once again?
amazing video. i dont know why there are not more views
Thank You Alex Obrien. Please subscribe to our EzEd channel for more such videos.
Sir mind Browning teaching
Nice video
Thank you +sandip . Please subscribe to our EzEd Channel for more such videos.
sir awesome lecture this video makes easy to every one to understand plz upload remaining topics of transformer it makes easy for us to go through
Mind blowing lecture!!!❤️
great language so simple thanx for this video please upload more
+manshi bharti Thank you. Please subscribe to your EZEd Channel for more such videos.
subscribed sir plz make a video on d.c. machines
ruclips.net/video/zaOGMpimJLs/видео.html
superb and mind blowing teaching sir
Thank You NEYYELA AMRUTHA RAO. Please subscribe to our EzEd channel for more such videos
wow you are genious, Thank you very much.
Thank You +bereket molla. Please subscribe to our EzEd channel for more such videos.
Super sir
Just now am a big fan for ur teaching
For view
Thank YOu. Please Subscribe to our EzEd Channel for more such videos
thanks and Love for that 💯💯
Good Video
Thank You +Priyank Kela. Please subscribe to our @EzEdChannel for more such videos
Brilliant teaching 😍😍
Thank you +Amit KuMar. Please subscribe to our EzEd channel for more such video
No words sir...🙏
at 14;15 IN HALF LOAD CALCULATION Ro1 =12.25 BUT U PUT 0.030 WHY ??
Plzzz can u do more videos
Hi +824726 Fantastic Scenes Please subscribe to our @EzEdChannel for more such videos.
Thank you.
You are welcome @Pasta. Plese subscribe to our EzEd channel for more such videos.
Good explanation 👍
Four of the equations on the screen at 12:45 are incorrect, should edit video to show correct equations that you derived earlier and then use in the calculation.
Osm vedio
Solid
Very helpfull lecture sir. 👍
Thank you sir🙏
Thank you sir my love and thanks.
Thank You +hussien itani. Please subscribe to our EzEd channel for more such videos
Adam o kadar güzel hazırlamış ki harika
Really good learning video.
But R02 = 0,03 + 0,25 * 0,05^2 = 0,03 Ohms solution is correct.
W Cu FL => R1 = 0,25 not 0,025 solution is correct.
W Cu HL = (0,5 * I1)^2 * R1 (I hope not R01). So (16,66 * 0,5)^2 * 0,25 = 17,35 W not 2,0816 W.
👍👍👍👍👍👍👍👍👍👍
Vry clear
Hi +Salma Mohammad. Please subscribe to our EzEd video for more such videos.
thank you so much sir , please can you create more videos for single and 3-phase transformers
Hello Ahmed Elkholy, We have more such videos on our EzEd channel. Please subscribe to EzEd Channel to access other videos.
maza aa gaya well done sir
Thank You +Gaming with ROCKO. Please subscribe to our EzEd Channel for more such videos
Definition of copper loss is wrong,the correct one is
The loss that takes place in copper winding is called as Copper Loss
the sound is very low . Good video though
Thank youuuuuuuuuuuuuuuuuuuuuuu
You are welcome @Mohamed. Plese subscribe to our EzEd channel for more such videos.
How you know i am not concentrating
Sir ye video Hindi me bhi banaya kijiye
There are many MISTAKES in the video..
1) 4:09 transformer ratio should be Np/Ns
2) 6:41 copper loss equations (is that exchanged with each other)
3) 12:44 check all 4 Equations formulas
4) 14:12 copper loss on Half load calculation R01 should be 12.25
.
If I'm wrong then correct me in replies...
Thank you..
If you found the same doubt
👇hit LIKE to help others.
Thank you @Shailesh. We will get it verified with our content team.