@@ThePattapoil 3 choses à condition que les planches soient bien rabotées : L'outil dans le trou central aide à faire un trou droit (90°), les tourillons s'ils sont équidistants servent à caller le guide pour qu'il soit au milieu de la planche de bois, et enfin ça sert à aller plus vite en évitant d'avoir à mesurer et marquer.
You can buy it from the German company "Wolfcraft" for more than 20 years, nicer, wirh proper handle, more safe and for three sizes (6,8,10mm) in one. It is very affordable and much less dangerous than this improvisation here.
It does need to be central, it just needs to line up. Could have hoth sides with holes near the base or near the top edge, as long at they line up the board should be flat no? Or am I overslimplifying things?
For anyone watching, you don't have to use a full on bearing for this. It doesn't spin, it's glued in. Bearings cost more than a simple steel collar. A steel collar is like 1/4 the cost.
@@TonyNguyenFR Right, but a collar or even just a simple spacer or bushing at the hardware store is like $2 or less if you don't have any of that shit lying around, or you don't feel like ruining whatever you take it out of. I understand what you are saying.
@@sparrowhawk81it's easier to find a shop selling bearings than one selling offcuts of hardened seamless tubing & it will do a better job for longer.
The *outside* ring of the bearing is glued in and does not spin. The inner ring of the bearing, that is touching the drill, is not glued. It will spin. Allowing the inside ring to spin means you are nicer with the drill bit.
Берешь брусок пилишь его на палочки размером 8 на 8мм и прогоняешь через другое приспособление. У тебя получается круглая палочка 8мм в диаметре. Пилишь ее на нужной длины шканты ruclips.net/video/4bd2IubGdZ0/видео.htmlsi=3ja_v4mBGTQIDpZg
Использовать подшипник как направляющую для сверла хорошая идея.Но есть проблема.Стружка при сверлении забивается между сверлом и внутренней втулкой подшипника.У неё нет возможности перетереться.Она крутится вместе со сверлом.И сверло начинает застревать.Чтобы этого избежать, нужно оставлять небольшое пространство для стружки.Между заготовкой и подшипником.Или разобрать подшипник и использовать только внутреннюю втулку
For us newbies, is that a small bearing in the middle? And that liquid squirted on it and the dowels, is that machine oil, or superglue maybe? Wish there was a bit more info or even captions to go with the visuals (they're not that difficult to add while editing).
Good for ONE size bit. And either a choice of bit snagging on bit, or too much space in hole to center. Also, who has bearings sitting round a wood shop.
I think any imperfection in centering the bearing between the two dowels will be canceled out if you make sure the same dowel is against both mating faces. It'd be a good idea to mark the dowels to facilitate this. The drilled holes might not be perfectly centered between the edges, but it doesn't matter as along as they are both the same distance from their mating edges.
@@ashleypowell8066 I guess what I mean is, you can have the line in "the window" so to speak, but it might not be dead center in the bearing. I guess for what it's for it would be close enough and this jig is pretty versatile when it comes to different widths of boards. Nice idea.
السلام عليكم ورحمة الله وبركاته. زادكم الله بسطة في العلم والجسم. وصلى الله وسلم وبارك على سيدنا وحبيبنا محمد وعلى آله وصحبه وسلم تسليما كثيرا إلى يوم الدين.
Я на 3д принтере такое сделать могу 😅 Подшипник, кстати, лишнее, я думаю, обычно все присадочные шаблоны делают просто со отверстием в металле или латунной втулкой
It's only worthwhile if you are doing a lot of repeated holes the same size like this where you might be using dowels to pin a large piece together. Like if you were constantly building workbench tops this would be great.
Es imposible q quede exacto sin aplicar la meticulosidad requerida para este trabajo. El punto o punteado para realizar los agujeros tiene q ser a la décima d milimetro y aquí se ve como yerra en los puntos.
Finally a tip I can see uses for
I have seen a lot of these on the web, but this one is amazing. Thank you very much for sharing your knowledge.
A quoi ça sert ce bidule ? D'ailleurs c'est quoi ce machin ?? Je vois pas tout sans doute ..
@@ThePattapoil Às vezes é muito difícil furar no ponto certo segurando a furadeira manualmente. Este equipamento parece muito útil.
@@ThePattapoil 3 choses à condition que les planches soient bien rabotées : L'outil dans le trou central aide à faire un trou droit (90°), les tourillons s'ils sont équidistants servent à caller le guide pour qu'il soit au milieu de la planche de bois, et enfin ça sert à aller plus vite en évitant d'avoir à mesurer et marquer.
@@ThePattapoilthe purpose is to put the drill central in the width of the job.
@@alanhat5252 и соблюсти вертикаль
Omg! Why have I been messing with so many dowel jigs. So easy and so good 😭 great work 👍🏼💯
Add a stop collar on the drillbit
Make a video of your collar.
For what? Close is good enough with dowels. There for alignment more than strength or anything else.
Such a simple and perfect design.
Весь мой мир разрушился! Как я без этого раньше жил? Хотя, отверстие влево немного уходит.
You can buy it from the German company "Wolfcraft" for more than 20 years, nicer, wirh proper handle, more safe and for three sizes (6,8,10mm) in one. It is very affordable and much less dangerous than this improvisation here.
Oh no way. How brilliant thank you
Look on the last image at the 15mm wood. It says all about accuracy! 😂🔫
yeh! i’m not saying they did! but they could have put it together & planed it, then took it apart, & rejoined it for the camara ?
I thought the same thing horribly off centered
It's only as accurate as you make the center hole
It does need to be central, it just needs to line up. Could have hoth sides with holes near the base or near the top edge, as long at they line up the board should be flat no? Or am I overslimplifying things?
This might be the first time I've seen a useful tip that I will actually use in the shop on RUclips.
Зачем было пилить, что бы потом склеивать?)
А приспособление прикольное.
For anyone watching, you don't have to use a full on bearing for this. It doesn't spin, it's glued in. Bearings cost more than a simple steel collar. A steel collar is like 1/4 the cost.
But you can find bearings around the house for free if you or your kids have old roller skates, blades, skateboards, scooters, etc.
@@TonyNguyenFR Right, but a collar or even just a simple spacer or bushing at the hardware store is like $2 or less if you don't have any of that shit lying around, or you don't feel like ruining whatever you take it out of. I understand what you are saying.
@@sparrowhawk81it's easier to find a shop selling bearings than one selling offcuts of hardened seamless tubing & it will do a better job for longer.
The *outside* ring of the bearing is glued in and does not spin.
The inner ring of the bearing, that is touching the drill, is not glued. It will spin. Allowing the inside ring to spin means you are nicer with the drill bit.
@@perwestermark8920 Ok see now that is something I hadn't thought of. Thanks, that actually makes sense.
Only as central as the initial tool hole, which is punched off centre at the beginning and shows on the last 15mm hole.
True but it was pretty damn close though…
You can make it as precise as you like by wrapping aluminum tape around the long side.
Only as central as your visual judgement centers the marking...!
Отличная приспособина, удобная, спасибо!
Отличная приспособа для склеивания ступенек
Mil gracias por compartir tus ideas es muy util
Uso isso ha 20 anos, mas sem o rolamento. Simplesmente no meio, um furo da mesma largura de um lápis, sem folga. Assim marco o meio exato.
Interessante. É um centralizador de furo. Gostei 👏🏽👏🏽👏🏽👏🏽
Keep them coming good sir!
Генеально и просто!
генИально
Great, now I need to learn how to make pegs.
Dowels. They’re very inexpensive and can buy them by the hundreds
He asked how to MAKE them dowels. Well, nobody knows… it’s like milk, it comes from the package. 🤷🏼♂️
They’re dowels and you can buy them by the bag full!!
Берешь брусок пилишь его на палочки размером 8 на 8мм и прогоняешь через другое приспособление. У тебя получается круглая палочка 8мм в диаметре. Пилишь ее на нужной длины шканты
ruclips.net/video/4bd2IubGdZ0/видео.htmlsi=3ja_v4mBGTQIDpZg
ruclips.net/video/4bd2IubGdZ0/видео.htmlsi=3ja_v4mBGTQIDpZg Ютуб все знает. Там еще легче
Bonza! Fiendishly simple, unfailingly correct!
Building this today- thx
Willy-nilly CA glue for the bearing, chaotic choice. I like
Priceless!
👍 An excellent and amazing video of woodworking!! Thank you very much for sharing your work.
Good idea I like things like this on the small budget
absolutely brilliant!
Goodness, this needs a "love" button.
Great simple jig 👍 👌
Absolutely genius ..
Awesome....I think it would be even better with smaller diameter registers and smaller diameter bit.
wolfcraft has those with 3 holes and also for end grain facing holes too
Have a scribe emerging from the center instead and you can use it for scribing centers!
Dude! You didn't match up the knots..lol. Great idea.
@@rednissan96 He purposely did it that way for strength. LOL
Not quite flush on the edge, but still good. Easily able to be sanded to make it flush.
Is it not flush? Looks flush to me.
Great! Doing mine in 1, 2, 3,...
This was so nice
Amazing invention.
Finally, a useful tip!
This is bloody brilliant. Probably the first RUclips hack I'm actually going to use!
Está muy bien.... Pero necesitamos distintos rodamientos,para distintas medidas de broca😮🤔🤔
Максимум пара. Для мебели так и одного хватит!))
Pues tan simple como tener distintos tamaños. No se tarda demasiado en hacer uno. Y no vas a usar 25 medidas de broca ¿verdad?
he's using it for dowels & we only see one size dowel
Until now I have only used one diameter of wooden plugs, where it's extra relevant to have perfectly centered holes.
That finger looks like the drill slipped. Been there too many times lol
Amazing
Awesome. Great way to save money and make your own self-centering jig
Использовать подшипник как направляющую для сверла хорошая идея.Но есть проблема.Стружка при сверлении забивается между сверлом и внутренней втулкой подшипника.У неё нет возможности перетереться.Она крутится вместе со сверлом.И сверло начинает застревать.Чтобы этого избежать, нужно оставлять небольшое пространство для стружки.Между заготовкой и подшипником.Или разобрать подшипник и использовать только внутреннюю втулку
I'll add this to the list of "handy hacks I'll never make. "
This is a very useful tip, but the final 2 pieces of wood didn't align that well. Something has to be done more accurately.
Nice idea ❤❤
For us newbies, is that a small bearing in the middle? And that liquid squirted on it and the dowels, is that machine oil, or superglue maybe? Wish there was a bit more info or even captions to go with the visuals (they're not that difficult to add while editing).
Surely it's glue to keep the bearing and pegs in there. And clearly a bearing, so that it wouldn't wear from the spinnig drill.
Good for ONE size bit. And either a choice of bit snagging on bit, or too much space in hole to center. Also, who has bearings sitting round a wood shop.
Genial idea de herramienta Por lo simple que es 👍
Looks cool. How can you be sure the line is in the center of the bearing opening?
I think any imperfection in centering the bearing between the two dowels will be canceled out if you make sure the same dowel is against both mating faces. It'd be a good idea to mark the dowels to facilitate this. The drilled holes might not be perfectly centered between the edges, but it doesn't matter as along as they are both the same distance from their mating edges.
@@ashleypowell8066 I guess what I mean is, you can have the line in "the window" so to speak, but it might not be dead center in the bearing. I guess for what it's for it would be close enough and this jig is pretty versatile when it comes to different widths of boards. Nice idea.
Good enough for Government work!
@@leemcgaha2212 Absolutely! Love that saying lol
This only works if the two pieces of wood are exactly the same thickness
I have no idea what all that was for but it looks cool!
the manufactured jig is to put the drill central in the wood.
Fantastic 😊
I feel like I've just witnessed the invention of the modern equivalent of the marking gauge.
wolfcraft had these dowel aids for years
This is why I watch RUclips vids. Would you have ever come up with this idea on your own. I’m a smart guy but this is crazy smart!!
Thx❤😂 for sharing😊
Only issue is what are you going to do when you wish to drill a different size hole? Source many different sized bearings?
Perfeito !!!❤👍👏👏👏🇧🇷
BRILLIANT 😊
Buen vídeo, es un método muy antiguo. En tu ejemplo, solamente te sirve para esa medida de broca. Saludos.
Very nice work
Very good, very clever! Thank you for sharing! 😊
السلام عليكم ورحمة الله وبركاته.
زادكم الله بسطة في العلم والجسم.
وصلى الله وسلم وبارك على سيدنا وحبيبنا محمد وعلى آله وصحبه وسلم تسليما كثيرا إلى يوم الدين.
You made my mouth water, how'd you do that?
Я на 3д принтере такое сделать могу 😅
Подшипник, кстати, лишнее, я думаю, обычно все присадочные шаблоны делают просто со отверстием в металле или латунной втулкой
NICE!!!
Works amazing for the purpose shown! But what if you are using a smaller drill bit? You’d still have to guess on the center spot
It's only worthwhile if you are doing a lot of repeated holes the same size like this where you might be using dowels to pin a large piece together. Like if you were constantly building workbench tops this would be great.
Очень грамотное изобретение 👍
Excelente idea 👍
Boa ideia, o problema é que vc vai ter que fazer várias medidas de brocas.
Excelente idea, me gustó gracias
Is this just to center drill holes?
E achas pouco?
The bearing did it! Yes, must be a bearing and not just a hole...dowels should be steel, wood wears out.
When Einstein's baby is swapped with the carpenters by mistake : 😂
You can put a pencil in the middle to create a perfect centerline
Great jig, what are the measurements to make it?
Não é crítico, a distância entre os pinos tem que ser maior que a espessura das tábuas.
Oh the look on his face when he realizes he owns a drillpress
А потом внутренний диаметр уйдёт у подшипника и будет биение и не точный размер
I gotta try this. It took me hours to buy a $5 drill guide 😮
와우 특별한 장비 없어도 되니 하나 만들어 봐야겠네요
What is the point of the bearing?
Good except if you want to use a different drill bit
Brilliant!
Beautiful
В комментариях обязательно найдётся какая-то крыса.
За труд спасибо!
Especially if they see someone speaking Russian... Reeeee😱
Perfetto! 👏🏻👏🏻👏🏻
Biena idea. Sólo que no deben golpearse directo los ruleman o rodamientos
Achei que ia ser usado pra outra coisa, mas entendi pra que que serve só no final😮😮
Хоч тут, щось нове. Вже не зварювання підшипника, а склеювання. 😊👍
Thanks for sharing
Lol i saw the thumbnail for the video and i thought i was going to watch someone making a wooden fidget spinner
Genius!
Excelente jig
У вас есть сверлильный станок? Но вы сверлите шуруповёртом? Доктор Дью к вам выехал
What are the measurements of this tool.
Magnífico centrador
Es imposible q quede exacto sin aplicar la meticulosidad requerida para este trabajo. El punto o punteado para realizar los agujeros tiene q ser a la décima d milimetro y aquí se ve como yerra en los puntos.
They actually make a tool for exactly this out of aluminum and its adjustable