Thank you for not playing distracting music. This allowed me to focus on the video . The occasional tapping of the hammer when setting things was almost therapeutic in nature, like icing on a cake.
So many "Tip/jig' videos are either blindingly obvious, been around for decades and everyone uses them or are something one can buy cheaply without making it yourself. This was the exact opposite, thank you for some genuinely useful and unique tips and tricks.
Wow, that was absolutely fantastic to watch. No distracting talking, straight to the point. Thank you so much for sharing that with us. I will definitely be making those Jigs. Thumbs UP
That seemed like more than six, lot of great information. It's so simple when you see how it's done but not so simple to come up with the idea's. I'm subscribing on the basis of this video, not something I've ever done before, normally watch at least 4~5 video's before I decide if channel is worth the time. Very well done, thank you.
*I'd like to take this opportunity to give it up for the trees. Without them we wouldn't have wood, and without wood the evolution of the human race would be incredibly different.* I've never really thought of this until just now. But imagine what early humans would have been without wood as a fuel and building material. No fires to cook or heat, no timber to make tools or shelter. No boats. Thumbs up please to say "thank you Trees!".
Szacunek dla mistrza, tu było konkretnie pokazane co i jak robi - szybciej ludzie zrozumieją za pomocą obrazu Można wszystko pokazać innym narodowością i bez słów zrozumieją. Bez słów same konkrety
Truly next-level spatial perception. Genius jigs, this is my newfound favorite woodworking channel. Brilliant non-verbal method of clear presentation. Gratitude.
You are an AMAZING craftsman and your mind thinks in very ingenious ways. Your videos are so very helpful and inspiring and make me a better woodworker.
Pure piece of art. You recognize true talent when a very difficult task is accomplished and presented very easily. One of the rarest videos where the technical skill matches the editing skill. Thank you so much. Gangsammidaa 😁
I subscribed to your channel, and had a look. You have a lot of things for all us novice woodworking to contemplate and make life easier. Thank you so much.
@13:41 you will notice that when you used the centering jig on the 15mm strip, the hole you drilled was not in the center. I suspect either one or both of the dowels were not perfectly round, or it may have been possible that you did not get both dowels snug against the 15mm strip resulting in the drill bit bearing hole not being centered.
Your precision is remarkable! How do you get those threaded inserts to screw in squarely? Mine always lean, even when I crank them in with the drill press! Nice video and skills
I work with steel. To be more precise, I work with blade sharpening. It is in moments like this, when I see a human being demonstrating the beautiful and wonderful creative capacity of the species, that I still have hope that this wonderful planet will not be dominated by ignorant people. Not without a fight, not without intelligent and creative resistance, even if we are few. My sincere compliments, and true congratulations on your demonstration of talent!!! Congratulations!!! (Sent here from Brazil)
I toke specialized woodworking classes... I would've hated the teachers if they made me do this😂😂😂 it's unatteinable beautifully cut😅. I'm stressed out just watching him cut😅 just perfect!!!
Добрый день! Отличные видео. В самом начале видео, для изготовления центровочного приспособления вы используете угольник "MICROMA",Скажите точное название пожалуйста, какой марки угольник и где его можно приобрести?!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I can't believe how many geniuses there are in the world. Whether you learned it or invented it you are a true craftsman and artist!
Thank you for not playing distracting music. This allowed me to focus on the video . The occasional tapping of the hammer when setting things was almost therapeutic in nature, like icing on a cake.
Amosmoses - Je hebt helemaal gelijk, het werkgeluid is de muziek. 😊
Thank you. Have a good day
Spoken like a true weak mind. Yikes
Cake icing, the most therapeutic of all foods ;)
So many "Tip/jig' videos are either blindingly obvious, been around for decades and everyone uses them or are something one can buy cheaply without making it yourself. This was the exact opposite, thank you for some genuinely useful and unique tips and tricks.
Thank you. Have a good day
The most impressive thing is acquiring all this skill and still having fingers.
Thank you for this video. It's actual tips that are useful, and not the 99% trash that we see on YT.
Wow, that was absolutely fantastic to watch. No distracting talking, straight to the point. Thank you so much for sharing that with us. I will definitely be making those Jigs. Thumbs UP
That seemed like more than six, lot of great information.
It's so simple when you see how it's done but not so simple to come up with the idea's.
I'm subscribing on the basis of this video, not something I've ever done before, normally watch at least 4~5 video's before I decide if channel is worth the time.
Very well done, thank you.
So that’s how logs are made! 😉
*I'd like to take this opportunity to give it up for the trees. Without them we wouldn't have wood, and without wood the evolution of the human race would be incredibly different.* I've never really thought of this until just now. But imagine what early humans would have been without wood as a fuel and building material. No fires to cook or heat, no timber to make tools or shelter. No boats. Thumbs up please to say "thank you Trees!".
Double rainbow guy, is that you????
How did you get bold test in your comment?
Thank you for a very entertaining a interesting video. I am sure I could find a use for all of your jigs in my small workshop.
Szacunek dla mistrza, tu było konkretnie pokazane co i jak robi - szybciej ludzie zrozumieją za pomocą obrazu Można wszystko pokazać innym narodowością i bez słów zrozumieją. Bez słów same konkrety
Truly next-level spatial perception.
Genius jigs, this is my newfound favorite woodworking channel.
Brilliant non-verbal method of clear presentation.
Gratitude.
Спасибо!!! Очень полезная информация!
Видно , что мастер 👍
Nice way of doing joins, with a few nice tools to add. Thanks! 👍💪✌
One of the best ive seen and no annoying music. Thanks O.P.
Спасибо тебе, добрый человек! От всей души спасибо! Дай бог тебе и твоим близким всего, чего сами себе пожелаете! 🤝🤝🤝
You are an AMAZING craftsman and your mind thinks in very ingenious ways. Your videos are so very helpful and inspiring and make me a better woodworker.
Pure piece of art. You recognize true talent when a very difficult task is accomplished and presented very easily. One of the rarest videos where the technical skill matches the editing skill. Thank you so much. Gangsammidaa 😁
Мастер, с большой буквы Мастер, спасибо за подсказки ещё делитесь Вашим опытом.
I subscribed to your channel, and had a look. You have a lot of things for all us novice woodworking to contemplate and make life easier. Thank you so much.
That shows that it’s not only about the tool, it’s about the brain behind.
Thank you. Have a good day
Very nice! I am a woodworker by myself and I love your content!
Чудові приспособи!, автору- повага!
Danke, sehr gut gemacht, aitäh, kiitos!
Классные идеи!!
@13:41 you will notice that when you used the centering jig on the 15mm strip, the hole you drilled was not in the center. I suspect either one or both of the dowels were not perfectly round, or it may have been possible that you did not get both dowels snug against the 15mm strip resulting in the drill bit bearing hole not being centered.
Learn something new everyday. I'm going to set up the bearing pins for my router. Thanks.
I second the no music in the back ground. Great ideas and jigs thanks.
Ты просто МАСТЕР. Только уважение тебе здоровья добра и мира Брат
Very impressed! Thanks for sharing your expertise and ingeneuity. Very inspiring.
Genius on the spot. I never knew it is actually so simple!
Very very very nice ideas 😊😊😊😊😊😊😊🎉❤❤❤❤❤❤❤❤I like 👍
Мужик , ты просто голова , молодец . Так много реально полезных и интересных приспособлений .
Your precision is remarkable! How do you get those threaded inserts to screw in squarely? Mine always lean, even when I crank them in with the drill press! Nice video and skills
One of the best I've seen. Thanx.
Dude. Genius idea to ensure you are on center. I especially love the step block idea!
You can use a pencil compass and get the same result.
Bravo ébéniste et merci pour les cours ❤
Молодец !
روعة روعة. منتهى الروعة، عمل مذهل!!
Wonderful job.. (Y.R👍)
🇵🇸🇵🇸🇵🇸
This is insane! Well done! I could not look away AND i learned a few new techniques.
I work with steel. To be more precise, I work with blade sharpening. It is in moments like this, when I see a human being demonstrating the beautiful and wonderful creative capacity of the species, that I still have hope that this wonderful planet will not be dominated by ignorant people. Not without a fight, not without intelligent and creative resistance, even if we are few.
My sincere compliments, and true congratulations on your demonstration of talent!!! Congratulations!!! (Sent here from Brazil)
Your technique is very good, I liked it a lot.
Genius 🤩
Que des belles astuces ! bravo
Nice work as always 😍😍
Thank you so much for this very useful video.
You are just amazing!!!
Estupendas ideas y muy bien hechas!! Si señor 😉
Happy to watching. Thank you
Thank you. These 5. is the best!
I rate it a 10! In fact I plan to build ond for myself. Don't suppose that you have plans that I can buy?
блин хотел уже 4 раз поставить ролику лайк :)
All my congratulations from France! Yu're a genious!
PARABÉNS…, muitas ideias e faculdades para o dia dia, gostei…, obrigado.
Abraço aqui do Brasil 🇧🇷
Decisamente di un livello superiore! Bravissimo
Show você assim nos ajuda muiiiito mesmo nota 10 😄 valeu.👍👍👍
I toke specialized woodworking classes... I would've hated the teachers if they made me do this😂😂😂 it's unatteinable beautifully cut😅. I'm stressed out just watching him cut😅 just perfect!!!
7:30 에 나오는 것은 기가 막히네요.. ㅎㅎ 그리고 꼭 아크릴 아니라도 되겠네요.
Добрый день! Отличные видео. В самом начале видео, для изготовления центровочного приспособления вы используете угольник "MICROMA",Скажите точное название пожалуйста, какой марки угольник и где его можно приобрести?!
Real beauty of invention and precision 👍❤
Wow you are fantastic I never seen things done that way very impressive
Great video. Mr. Centrepoint jig is going to be my new best friend
super pomysły bardzo przydatne dzięki i pozdrawiam.😇👍👍🌼🌻🌺
Ingeniero carpintero un genio !!!!
Saludos desde Argentina
LOVED the router centering cone!
very good ideas & great info thanks for sharing Godbless
Lots of brilliant hints at being more accurate
Really great jigs (tools). Much appreciated.
Love your creativity an Courage ❤🎉
This is absolutely Extraordinary
Well, that was truly impressive. Thanks
와우. 자랑스러운 한국의 장인이시네요.
BRAVO,MASTER!
Супер! Особенно последнее!
wow very useful, thank you!
Great! Simply.
Gracias por compartir.
You are a dern genius!!
Fantastico. Complimenti
Excelente, de los mejores videos de hacking de carpintería.
Лайк и подписка😊👍
This is totally awesome.
Verdaderamente impresionante. Un grandisimo trabajo
Perfect - 💪💪👍👍👍🙏🙏👏👏👏👏
Отличная работа!
🙏🙏🙏🙏🙏 Invaluable experience
Im interested in what types of glues is used?
Mistr super 👌 cool 👍👍👏
Muito bom seu trabalho
Awesome Idea's
unglaublich perfekt!!!
Awesome, thanks
these are awesome!
Top notch!
This is next level thinking
👍👍👍👍👍👍 viele Ideen die ich so noch nie gesehen habe ‼‼Danke ‼
👏👏👍🤝класс!!
What a skill 😮
Pure satisfaction.
This guy is awesome
Спасибо, сохранил этот ролик на будущее.