The one thing iv learned on the 540xp you can do is put a small leather strap or something on the springs that holds the handle to the body. When you get it pinched and yank it out it pulls the electronics out of the handle. Iv done it several times but we are rough on our saws.
Husqvarna battery in the climbing saws NEVER OVERHEAT! They have ventilated batteries + a fan to suck air thru the battery. You don't whale on the saw ("crank") but as an arborist maybe around 20times total a year the battery will shut down >10second stop & reboot after attempting to drain it on a large load cut. Work around is the Husqvarna battery saw actually runs better & uninterrupted on eco mode for large logs
Your test showed kinda what I was thinking. They both have their good points for sure. I’m kinda in the same boat wondering if I really have enough need for a top handle to justify buying one. Thanks for sharing fellas👊🏻
I have an Echo 330T. I like using the top handle saw for limbing (and marking), especially if you have to reach up so you can redirect the cut limb or hold it. Plus it is much lighter than my regular saws. You illustrated the point well about reasonable expectations for the top handle saws cutting limbs instead of logs.
I agree, I love mine for cutting limbs and brush. They aren’t meant to cut 14” rounds but I wanted to make sure viewers know, one will do it and one won’t for very long. Thank you for watching and sharing your thoughts.
Running the t540i in the bucket chunking down white oak legs I've overheated the battery. It's a rare occurrence but it does happen. But we run our saws pretty hard a lot of our 201s have a problem melting the plastics near exhaust to the point of pieces breaking off.
The 540 is nothing like it will be once it breaks in. It’ll probably be killer with mods. A nicely broken in high quality bar and a chain filed perfectly will make it unbeatable. It’s hard to improve electric saws.
Keep in mind that gas chainsaws require break-in and get better afterwards. Battery saws are as good as it gets right out of the box, and slowly deteriorate with each charge cycle. It would be a better comparison to see some timed cuts after each saw has been used for a month.
I have 10 year old m18 batteries have used them every single day 7days a week batteries last alot longer than you think. And I bet my old batteries is just as good as my new ones I just got.
@@truthisweareallgonnadie. I agree I’ve used Milwaukee batteries for 10 years and have never had a bad one aside from 9.0s that were recalled and discontinued shortly after.
good segment guys. cute saw but it just seems unnatural to cut wood and not hear the engine and smell the fuel mix.....lol. how long will it cut and how long does it take to recharge? would be great for trimming or clearing lanes in the woods for deer season. saw you on "in the woodyard" with Chris.
This same day, I used my saw quite a bit for limbs and small stuff, I would consider it a normal day, and my battery lasted all day. Thanks for watching!
I love the Americans and their "Huska Verna!" pronunciation. It's Hus (With a U like in Huge) and the Qvar is more like Quar in Quarter. So you say it like Hus-Quarna with no pause. But I still like the way you guys say it. It sounds really goofy for a Swede. Nice channel and great info guys.
Hey man how are you doing I'm good nice saw but I'm a stihl guy I have a O29 farm boss I had a 390 but I sold it and I buy a neo ticket it is a same as a stihl 390 it runs well went thru 2 tanks
Great vid boys I’m from Muncie myself went to delta but great review and a Really an awesome saw imo…truly a big leap forward for electric chain saws….I’ve got probably 50 tanks of bar oil thru the 2826 and 10 or 12 tanks thru the 2727 but-glad to see you have mentioned some of the most important flaws like the I’ve seen the past few months with the 2826-20 top handle saw, starting with the tendency it has to utterly destroy batteries, ( the battery’s are still at 18v and not under the low voltage cutoff nor are the strings of cells imbalance) idk if it pulled to much current and overloaded something on the board but that’s my guess..I’ll tear it down soon for inspection but my suggestions would be using A.) Only High output batteries and B.) would be only use packs that are covered under warranty HO packs are 3yr warranty so seriously just look at the bottom of the battery and in the top right there are 3 sets of numbers spaced apart & the first 2 digits of the middle set are year of manufacture…I personally have destroyed 2 of the HO 8.0s with the m18 chainsaws but also the 6&8ah are what ive used most in it. I strictly would stick to the HO batteries with one exception that being the HD12.0 which HO packs are imo mandatory with this saw so like the HO xc6.0, the new forge xc6.0 (less voltage sag when under load) the HO 8.0 & the only one that isn’t high output but high demand is the 12.0 but if you take anything from this heed the advice of only using HO batteries and make certain there under warranty cuz u will need it if u use this saw with any regularity.
This is the second video I've seen of an 8.0 battery overheating. (Brayden Somers also had that happen with an 8.0) Supposedly the 12AH runs cooler because it has more cells. I'd be interested to see if thats true.
I got the top handle yesterday the Milwaukee I like it but overheated my battery. I think for small limbs or one to have with you to clear a trail from a downfall. I also have the Milwaukee pole saw and love it. Both has there place.
Run the 12ah battery that will help alot and have 2 or 3 batteries so you can swap out. Some like the 8ah and I noticed they usually over heat never seen a 12ah over heat but get 2 or 3 of the 8ah if that's what you're running or 2 12ahs
I run a tree business and we have every brand top handles and gas and electric. The Stihl 201t is the strongest of them all but all my guys grabs the new 18v Milwaukee and the Echo 2511t bc it’s lightweight. We just use these for limbs then the 500i or the 572xp comes out.
What size bar did you have on the T540 Mark III? Looks like a 16”. I’m buying this saw soon and undecided between the 12”-16” bars. I’m thinking of going in the middle and getting the 14” bar. Nice video.
Go with a 12. They’re a climbing saw. If you need a bigger bar, just pull up a 550xp or a 261, 500i or 592 that have the power and speed to get through bigger wood. You have well over 20” of reach with a 12” bar still.
Hey guys just stumbled across your video, curious what chains/bars are you running on your T handles? are they 3/8 low pro? I've been running a t435 husqvarna and having some issues so been looking to upgrade, Had a look at a 201 but not really ergonomic for me, so might consider a 540. Have you run it much more and how has your experience been with it and do you like it?
We have a 201 vs 540 video coming out next Saturday you may want to watch before purchasing. My 201 runs 3/8s low pro. Can’t remember what the 540 runs but it’s not the same as my 201.
@@765Guys I'll keep an eye out for it. I've talked to a few pro climbers and they said they prefer the 201 because it has better torque and is easier to restart. But I'll be curious to see it on video.
If you’re doing tree work you should be making enough money not to worry about $300. Buy the t540i with 2 batteries and the regular qc330 charger. You’ll be happy and cutting better than this new junk mark 3 they just put out. It’s a disgrace imo Also the battery top handle husqy dose not overheat. Ever
Hello Guys, based on my thirty years + as a tree climber, dogs on top handles are something you remove as an arborist because they damage the bark for pruning cuts so totally irrelevant. The T540XP2 is A1 - used for 10 years so can't see the point in this upgrade but the T540i battery is a lot lighter and way more user friendly. For firewood cutting don't bother with top handled chainsaws.
@@765Guys I've always heavily used top handled saws on the ground for ease of use but it's important to remember they are supposed to be primarily for climbing work where you need to be able to use the saw one handed when reaching out aloft (not that any of the manufacturers ever say you should use them one handed).
At this point , you almost need to disassemble the case to tell difference. To be fair , you should have tried a different battery. Milwaukee actually warrantied a1/2 impact for me before they figured out the battery was counterfeit
The one thing iv learned on the 540xp you can do is put a small leather strap or something on the springs that holds the handle to the body. When you get it pinched and yank it out it pulls the electronics out of the handle. Iv done it several times but we are rough on our saws.
I’ve been told this is a completely redesigned saw, maybe it’s fixed?
Husqvarna battery in the climbing saws NEVER OVERHEAT! They have ventilated batteries + a fan to suck air thru the battery.
You don't whale on the saw ("crank") but as an arborist maybe around 20times total a year the battery will shut down >10second stop & reboot after attempting to drain it on a large load cut.
Work around is the Husqvarna battery saw actually runs better & uninterrupted on eco mode for large logs
I have a Jonsered gas and a Makita battery top handles. Use them very seldom, but, they are handy!! Stay Hydrated and Have a Safe Day
Your test showed kinda what I was thinking. They both have their good points for sure. I’m kinda in the same boat wondering if I really have enough need for a top handle to justify buying one. Thanks for sharing fellas👊🏻
Thanks for watching Todd!
Top handles are nice for brushing out so you have one hand on branches to flip out of the way. That was the reason I bought mine years ago.
I have an Echo 330T. I like using the top handle saw for limbing (and marking), especially if you have to reach up so you can redirect the cut limb or hold it. Plus it is much lighter than my regular saws. You illustrated the point well about reasonable expectations for the top handle saws cutting limbs instead of logs.
I agree, I love mine for cutting limbs and brush. They aren’t meant to cut 14” rounds but I wanted to make sure viewers know, one will do it and one won’t for very long. Thank you for watching and sharing your thoughts.
Came over from "In the Woodyard" after I watched your video with Chris. I subscribed and can't wait to watch all your videos!!
Glad to have you along! Thanks for subscribing, hope you enjoy!
I've been a stihl guy a long time i own the ms201tc but i always wanted the husqvarna t540
Coming up we’ll have a video on both!
Running the t540i in the bucket chunking down white oak legs I've overheated the battery. It's a rare occurrence but it does happen. But we run our saws pretty hard a lot of our 201s have a problem melting the plastics near exhaust to the point of pieces breaking off.
The 540 is nothing like it will be once it breaks in. It’ll probably be killer with mods. A nicely broken in high quality bar and a chain filed perfectly will make it unbeatable. It’s hard to improve electric saws.
Great video. I hate to admit but that new Husky top handle has my interest. I've been looking at adding a top handle to the fleet.
I think we might get a white one, top of the line unit to try against this one.. but this husky is going to be tough to beat!
Congrats on the 1k!!! Good work! Also, I just remembered ...congrats on the wedding!!!
Thanks Chris!
We have a Milwaukee chainsaw. It works well.
Keep in mind that gas chainsaws require break-in and get better afterwards. Battery saws are as good as it gets right out of the box, and slowly deteriorate with each charge cycle. It would be a better comparison to see some timed cuts after each saw has been used for a month.
Coming soon!
it's more like a bell curve with gas saws
I have 10 year old m18 batteries have used them every single day 7days a week batteries last alot longer than you think. And I bet my old batteries is just as good as my new ones I just got.
@@truthisweareallgonnadie. I agree I’ve used Milwaukee batteries for 10 years and have never had a bad one aside from 9.0s that were recalled and discontinued shortly after.
Hey guys. I found you on Chris’ channel and wanted to check in. Looking forward to seeing what you’re up to
Thanks for stopping by, hope you enjoy the videos!
The problem I have is you work them hard and the battery heats up and you can’t recharge them until they cool . You also shorten the life expectancy
good segment guys. cute saw but it just seems unnatural to cut wood and not hear the engine and smell the fuel mix.....lol. how long will it cut and how long does it take to recharge? would be great for trimming or clearing lanes in the woods for deer season. saw you on "in the woodyard" with Chris.
This same day, I used my saw quite a bit for limbs and small stuff, I would consider it a normal day, and my battery lasted all day. Thanks for watching!
I love the Americans and their "Huska Verna!" pronunciation.
It's Hus (With a U like in Huge) and the Qvar is more like Quar in Quarter.
So you say it like Hus-Quarna with no pause.
But I still like the way you guys say it. It sounds really goofy for a Swede. Nice channel and great info guys.
Hey man how are you doing I'm good nice saw but I'm a stihl guy I have a O29 farm boss I had a 390 but I sold it and I buy a neo ticket it is a same as a stihl 390 it runs well went thru 2 tanks
The huskies saw battery over heats as well
Not suprised, battery technology is only so good and I think Milwaukee is one of the best out there for cordless tools.
Great vid boys I’m from Muncie myself went to delta but great review and a Really an awesome saw imo…truly a big leap forward for electric chain saws….I’ve got probably 50 tanks of bar oil thru the 2826 and 10 or 12 tanks thru the 2727 but-glad to see you have mentioned some of the most important flaws like the I’ve seen the past few months with the 2826-20 top handle saw, starting with the tendency it has to utterly destroy batteries, ( the battery’s are still at 18v and not under the low voltage cutoff nor are the strings of cells imbalance) idk if it pulled to much current and overloaded something on the board but that’s my guess..I’ll tear it down soon for inspection but my suggestions would be using A.) Only High output batteries and B.) would be only use packs that are covered under warranty HO packs are 3yr warranty so seriously just look at the bottom of the battery and in the top right there are 3 sets of numbers spaced apart & the first 2 digits of the middle set are year of manufacture…I personally have destroyed 2 of the HO 8.0s with the m18 chainsaws but also the 6&8ah are what ive used most in it. I strictly would stick to the HO batteries with one exception that being the HD12.0 which HO packs are imo mandatory with this saw so like the HO xc6.0, the new forge xc6.0 (less voltage sag when under load) the HO 8.0 & the only one that isn’t high output but high demand is the 12.0 but if you take anything from this heed the advice of only using HO batteries and make certain there under warranty cuz u will need it if u use this saw with any regularity.
Sorry for the ramble….talk to text makes it ez to ramble 😂
This is the second video I've seen of an 8.0 battery overheating. (Brayden Somers also had that happen with an 8.0) Supposedly the 12AH runs cooler because it has more cells. I'd be interested to see if thats true.
We’ll have to test that theory soon! Thanks for watching!
Just picked up a T540xp MK III today
I got the top handle yesterday the Milwaukee I like it but overheated my battery. I think for small limbs or one to have with you to clear a trail from a downfall. I also have the Milwaukee pole saw and love it. Both has there place.
Run the 12ah battery that will help alot and have 2 or 3 batteries so you can swap out. Some like the 8ah and I noticed they usually over heat never seen a 12ah over heat but get 2 or 3 of the 8ah if that's what you're running or 2 12ahs
I run a tree business and we have every brand top handles and gas and electric. The Stihl 201t is the strongest of them all but all my guys grabs the new 18v Milwaukee and the Echo 2511t bc it’s lightweight. We just use these for limbs then the 500i or the 572xp comes out.
Good information! I think we need to get a 201t to try against this husky. It’s a tough one! Thank you for watching!
I think I'm gonna get a 2511t it might chug through the wood a little slower but the insanely low weight makes the tradeoff worth it.
Stihl 20T, 200T and now the 201T😉 Perhaps a future video you could compare Pfanner, Husqvarna, Stihl and CLogger.
Possibly stihl, I’ve never heard of pfanner or clogger!
@@765Guys chainsaw pants and chaps.
Put my name on a T540 MK3 today. Should be at my dealer very soon.
Awesome!
Can you show how you swaped out the the tree spike on Milwaukee
We can mention it in a video coming up! Thanks for watching!
Wonder how well the battery saws will work in the teens during the winter?
If it’s like power tools probably not great.
@@765Guys Husqvarna it is!
What's the weight of both?
What size bar did you have on the T540 Mark III? Looks like a 16”. I’m buying this saw soon and undecided between the 12”-16” bars. I’m thinking of going in the middle and getting the 14” bar. Nice video.
16”
Go with a 12. They’re a climbing saw. If you need a bigger bar, just pull up a 550xp or a 261, 500i or 592 that have the power and speed to get through bigger wood. You have well over 20” of reach with a 12” bar still.
Hey guys just stumbled across your video, curious what chains/bars are you running on your T handles? are they 3/8 low pro? I've been running a t435 husqvarna and having some issues so been looking to upgrade, Had a look at a 201 but not really ergonomic for me, so might consider a 540. Have you run it much more and how has your experience been with it and do you like it?
We have a 201 vs 540 video coming out next Saturday you may want to watch before purchasing. My 201 runs 3/8s low pro. Can’t remember what the 540 runs but it’s not the same as my 201.
@@765Guys I'll keep an eye out for it. I've talked to a few pro climbers and they said they prefer the 201 because it has better torque and is easier to restart. But I'll be curious to see it on video.
@@BenOfficial94 the new 540 mark 3 really is a good one..
Put a 12ah in it
If you’re doing tree work you should be making enough money not to worry about $300.
Buy the t540i with 2 batteries and the regular qc330 charger. You’ll be happy and cutting better than this new junk mark 3 they just put out. It’s a disgrace imo
Also the battery top handle husqy dose not overheat. Ever
What is junk about the mark 3? I’ve seen other comments stating the 540i does overheat🤷♂️
Hello Guys, based on my thirty years + as a tree climber, dogs on top handles are something you remove as an arborist because they damage the bark for pruning cuts so totally irrelevant. The T540XP2 is A1 - used for 10 years so can't see the point in this upgrade but the T540i battery is a lot lighter and way more user friendly. For firewood cutting don't bother with top handled chainsaws.
That’s good information! We love using top handles too clear the limbs from downed trees to get to the firewood.
@@765Guys I've always heavily used top handled saws on the ground for ease of use but it's important to remember they are supposed to be primarily for climbing work where you need to be able to use the saw one handed when reaching out aloft (not that any of the manufacturers ever say you should use them one handed).
@@angelwars3176 be sure to check out the video coming out tomorrow if you like top handles!
Certain tools are better for Certain applications!
For sure! Thanks for watching!
That battery is a fake. Been down that road.
It is 100% not a fake. I have never purchased a fake or clone Milwaukee anything.
Ya. Thats what I thought too. They are almost identical. Try a different battery
100$ on Amazon ? Almost guaranteed fake
@@orangielegros it’s real lol. I’ve been using Milwaukee daily tools for 15 years. I’m well aware how to spot fakes.
At this point , you almost need to disassemble the case to tell difference. To be fair , you should have tried a different battery. Milwaukee actually warrantied a1/2 impact for me before they figured out the battery was counterfeit
That was the weakest husky top handle iv seen