This was really helpful as I’ve just fitted ours to the car and wasn’t sure if I had done it correctly. There were little to no instructions in the pack. Thank you for this.
at the back there's a slot on the leg. You need to turn the isofix upside down on the floor. Pull the leg in as far as it can go/fold in and then put it in the slot on the back. This will stop the beeping.
It's to stop rotation misuse. As you need to legally reward face up to 15 months, the base will not allow you to forward face your infant car seat. Once your child is 15+ months, you can flip this button, and the base will turn toward facing.
Hello, thank you for the video, I’m bloked because my isofix couldn’t rotate (I just bought and installed it for the first time). It seems to be locked in the position. Do you have the solution?
I installed mine, the only question is: is it ok if there's space between the base and the seat when the isofix are green and the leg is green too? Do you suggest to use a cushion of some kind to fill the gap?
@@BabyLadyUK1991 yes, there's a gap, I guess it's just how the seat is designed. The rebound bar touches the back but the bottom is almost floating. Should I fill the gap then?
@@BabyLadyUK1991 yes it is, I suppose it's just the car seat design, being kind of sporty it' more inclined than a usual seat. I'll put something in between
Silver handle, below the hood at the rear of the car seat. Squeeze the handle and push down to pop into the recline position. Note: on the Base T, there are only 2 recline positions. Off the base, there are 3 :)
I've got the same problem. The thing beeps all the time. Even when I have it in the trunk. Just popped out the battery. And yeah, it's a flimsy build quality, but I guess they all are
Really useful video, thank you! Has given me peace of mind that we’ve fitted ours correctly ☺️
This was really helpful as I’ve just fitted ours to the car and wasn’t sure if I had done it correctly. There were little to no instructions in the pack. Thank you for this.
Can the baby lie completely flat when in isofix base
Thanks from the Netherlands. Very helpful
You’re a life saver! Very helpful
ThAnk you I am glad you found it helpful
Thank you so much for this video. It was so helpful 🥰
We are so happy you found this helpful
So helpful and clear, thank you
Best video on this!
Very helpful vidéo 👌👌
Excellent
Thanks!
Very helpful but what about the beeping noise when the base is removed?
at the back there's a slot on the leg.
You need to turn the isofix upside down on the floor. Pull the leg in as far as it can go/fold in and then put it in the slot on the back. This will stop the beeping.
Aha! Thank you. 1:26
@@richardnorthcote5675 You are very welcome we are glad this helped
Thank you
Done everything you’ve done everything shows green, but mine moves side to side is this normal. Thank you
Some movement is normal, as the base can move on your isofix points - if you are worried we would always suggest checking with your retailer
Are the latched supposed to be able to move from side to side while they're latched?
Hi Jasmine, there will be some slight movement along the isofix points, this is perfectly normal
Great video. What does the button do on the inside of the base? It’s located near your left hand at the end of the video.
It's to stop rotation misuse. As you need to legally reward face up to 15 months, the base will not allow you to forward face your infant car seat.
Once your child is 15+ months, you can flip this button, and the base will turn toward facing.
Many thanks!!
Is this car seat compatible with the YOYO 2 stroller/adapters? And does this car seat fit in a fiat 500 (with or without isofix base)? Thank you !
Hello, thank you for the video, I’m bloked because my isofix couldn’t rotate (I just bought and installed it for the first time). It seems to be locked in the position. Do you have the solution?
If the base is installed correctly and not rotating we would recommend contacting your retailer to take a look and help resolve the issue
I installed mine, the only question is: is it ok if there's space between the base and the seat when the isofix are green and the leg is green too? Do you suggest to use a cushion of some kind to fill the gap?
Hi Holly, is there a gap underneath the base? It should be flat on the seat, with the rebound bar also touching the back of the seat as well.
@@BabyLadyUK1991 yes, there's a gap, I guess it's just how the seat is designed. The rebound bar touches the back but the bottom is almost floating. Should I fill the gap then?
@@hollyjaw3303 Hi Holly, yes, there should be no gap between the bottom of the base and the seat. Is the isofix leg extended to far up?
@@BabyLadyUK1991 yes it is, I suppose it's just the car seat design, being kind of sporty it' more inclined than a usual seat. I'll put something in between
Anyone else have issues with the size? I’ve got an x3 and my passenger seat has to come so far forward to fit all in
Literally just noticed the same thing! Just bought an X3 this week and passenger seat does have to be quite far forward unfortunately
You don't show how you lay the car seat down?
Silver handle, below the hood at the rear of the car seat. Squeeze the handle and push down to pop into the recline position. Note: on the Base T, there are only 2 recline positions. Off the base, there are 3 :)
I've got this and the base is terrible. The extender leg is joke, poorly made but constantly beeps until you put it in a 'unstable' position.
I would suggest retuning this to the retailer you purchased it from as we haven't had any compliants here so it might be bset to get it checked.
I've got the same problem. The thing beeps all the time. Even when I have it in the trunk. Just popped out the battery. And yeah, it's a flimsy build quality, but I guess they all are
Is this carseat compatible with the iCandy all terrain?
We are still waiting for the official report to be made on compatibility for pushchairs but hopefully this should be available soon :)