Diode Laser lens cover cleaning and replacement
HTML-код
- Опубликовано: 4 июл 2024
- If you've noticed a drop in laser power you have have a dirty or crack lens cover. In this video I'll show you how to clean and or replace the lens cover to get your diode laser back and running at it best performance.
Check out my replacement lens cover kits in my Etsy shop here: vintaurisworkshop.etsy.com/li...
The following links are amazon affiliate links for items used in this video. Using these links does provide a small commission to me at no extra cost to you. I appreciate the support when using these links.
99% Isopropyl Alcohol - amzn.to/3Q5XwzZ
Foam Cleaning Swabs - amzn.to/3TWb5TN
Microfiber Cleaning Cloth - amzn.to/4cYIu8U
Acetone - amzn.to/3vTiNWO
Nylon Cleaning Brush - amzn.to/43Wyfho
Digital Caliper - amzn.to/3VYT21U
Follow me on Instagram and Facebook for behind-the-scenes on what is happening in my workshop!
/ vintauri
/ vintaurisworkshop
Check out my Etsy and Amazon store for more ways to support this channel!
vintaurisworkshop.etsy.com
www.amazon.com/shop/vintauri
Affiliate links for lasers
xTool - www.xtool.com/?ref=vintauri&u...
Atomstack - shareasale.com/r.cfm?b=180857...
Sculpfun - shareasale.com/r.cfm?b=230174...
LaserPecker - shareasale.com/r.cfm?b=203048...
SainSmart - shareasale.com/r.cfm?b=592994...
Acmer - acmerlaser.com/?ref=ckaqg0id
#diodelaser #xtool #atomstack #acmer 
Хобби
Steve, excellent video. It is great that someone finally made a video on this topic, I know there are a lot of people that needed this. I bought your lens kit a couple months ago and it has worked great. Thanks for all you do for our laser community.
Great to hear that the lenses are working well for you! I meant to do this video a while ago but I've been strapped for time the past few months so it kept sliding down the priority list.
Thanks for another great video, Steve. You’ve taken the guesswork out of this process. I’ll be ordering your lens package just so that I have them handy.
Thanks for the video Steve, I appreciate it. Picked up several pointers.
Glad it helped, thanks for watching!
Super awesome video. I just order some foam swabs thanks for sharing this info.
Steve, Any chance that we could get a machine maintenance video. Have seen some concerning overall cleaning but maybe a bit more in-depth for machines that have been in use for a long period. Lube/oil, whatever. Thanks,
Thanks for the great tips! (And for reminding me to clean my laser, today.)
You are so welcome!
The video is great but the fact that you sell these kits is by far the best thing I have discovered from this video! One issue I always have is the build up of crap on my fan and inner components and I have always had to take my module apart to clean as best I can in there. I have actually had the fan stop mid job because it got too gunk ed up. You seemed to indicate that this would be caused my not sufficient airflow over my work piece. That could also explain the excessive charring I get. I currently use an exhaust fan pulling the air from my Grow tent that I am using for an enclosure. I leave the zipper un-zipped at the bottom so it provides an inlet for the air. I do not usually see excessive smoke build up in the tent but occasionally I do see a little for a few seconds. Do you have any suggestions for increasing the airflow over my piece? Whisper fan(s) on one side blowing it off the piece? Not sure how else I would get airflow to keep the cooling fan from sucking in particulates into the module. Any thoughts would be greatly appreciated. I am building my own enclosure-zilla so if I can incorporate something in that to avoid this issue I would love to hear it.
Thanks for what you do. Your channel is one of the primary sources for me and I appreciate your insight.
There is that handsome dude in the background again..
I don't know about that. He just sits there lurking.... staring at me, really, it's kind of creepy!
Thanks for the great video. Just a thought, what about making the 3D tool double sided. One end for the inside and one for the outside?
Clack Shacks Face in the background is freaking me out......................LOL, JK
Yeah he can have that effect on people. 🤣
Steve, Appreciate the info. I've had to replace lens a number of times and have spare holders on hand. Did order some lens from you also. Can't have enough on hand. I do clean the lens prior to starting the laser for the day, spritz of alcohol and wipe with Q-Tip. Seems to improve the amount of time I can use the lens before it goes bad. I'm using the xTool D1 10w. Just ordered some of those swabs, so will stop with the Q-tips. Great advice. Thanks,
P.S. Note the Clack Shack plug in the background.
I can barely tell that isnt the Real Dave! 😂
It’s a pretty realistic facsimile! 😂
Great info Looking for al lens cover for the ATEZR L2 24W. any suggestions?
Sorry I missed this earlier. I have the L2-36w machine and these will fit in the end cap for the lens cover. If you can take yours off and measure the inside diameter of the cap it should be around 14mm for them to work.
do you know if they will work for a 40w xtool pro they look a little different .
I do not have a 40w Pro for the D1 series to test them on. I will be testing them on the S1 40w module soon.
Assuming since you reference it in the video that your replacement lens cover pack fits the Ortur 10W?
Unfortunately no. As I mentioned after taking them apart, they use a different lens that is smaller and held in differently. You'll still need to get them directly from Ortur.
what is the name of spray that you use for cleaning the module cover
That was the LA Awesome cleaner. Dawn Power wash or any other degreaser cleaner will work well also.
thank you -
Steve on a stick
Clacks having fun with that one.
Thanks for a great video, very educational.
Two questions:
Can we just start with acetone for cleaning, it’s easier to find than pure isopropyl?
And why is there an engraving of Colonel Sanders in the background?
You could start with acetone, but if you're using a stock lens that is glued in, that will break down the adhesive a bit so just be mindful of that. I personally like to use the least harmful chemical first but I can understand if it's harder to source. As for Colonel Sanders, that's my friend The Clack Shack and he liked to make a Cameo appearance in my videos. :)