Needing something larger simple and self-sustained is what I’m looking for. On a farm there are common wear parts that are not expensive but take time to get..especially with the supply chain nearly non-functional-it can take 6 months to get a 3/5.75 nylon bushing for my 45 year old seeder!…that’s where a 3D printer would be handy. For a first time buyer I’m hoping this is the printer that will work.
Nylon is hard to print you would need a new hotend and you would need to upgrade the bed and you need a filament warmers because nylon opsorbs a lot of water.
Printing in the middle of the bed on a large format printer doesent give a true evaluation of the printing capabilities of this printer, I would like to see all reviews show an attempt to print a 1mm deep sheet of plastic covering the whole of the bed to show the full print capabilities after all the reason you would buy a printer with a large bed is to print parts with a large bottom part, its no use having a massive bed if its so warped that you cant print on it, and if your aluminium bed is rolled and not cast its a pretty good bet its going to be warped, of course there are the odd exeptions but in my experience large beds need ABL, some have FW that enables manual mesh levelling but with a large bed this is a pain
That's a great suggestion. You can see around 8:56 that I'm printing a large print that takes up most of the bed and it worked out great but I like the idea of doing a large flat bottomed print that takes up pretty much the entire bed to see if any given printer can handle that. Could even just be a big square bin.
@@colinrobinson9858 I haven’t yet printed a full bed print because I’ve been testing several other printers lately so the full size stormtrooper helmet is the biggest print I’ve done but it came out impressively well.
You don’t have to level for each print. Typically you’ll level it once and then not have to for quite a few prints. It will only need to be leveled again if there’s an issue of some sort.
Got mine 2 years ago from NEWEGG.. it was on sale for $179.00 with a 10.00 dollar rebate.. it was refurbished but it was refurbished by LONGER and shipped right from LONGER.. and I can save you some time .. the LONGER LK5 PRO is a fantastic deal, I have been printing like a mad man for 2 years and love this printer.. made some changes to it as soon as I got it.. first moved the spool mount to the top.. printed a pully for filament also got a new .. then bypassed the cheap runout sensor as they do not last very long, that is why they send 2 with it.. save some time and headache and just bypass it ..then I got an extension cable for the MicroSD card and made a mount in the front of the printer right under the LCD screen.. YES THIS PRINTER IS GREAT!!!
I'm looking to dip my toes into 3D printing, and always had the old notion that printers were expensive and could only do small things. Came across this review by accident and my mind is blown. Might have to ask for one of these for Christmas :D
Nice to see longer is finding a niche elsewhere in the hobby. I only knew them for the Longer Orange, which was one of the big options at the very start of the home resin printing boom back in early 2020. After that first offering, they kinda fell off the map and left the area dominated by Elegoo, Anycubic, and Phrozen.
Just bought the Creality Cr-10 V3 as my first 3D printer (new to 3D printing but definitely not to CNC and g-code after making a mini CNC mill). With 130 discount it comes in at 389 and has dual Z-axes, direct feed print head and looks as if it uses the same basic construction as in your review, but heavier duty, has the same print volume, and does come with decent feet and cutters 🙂. Seperate power and control box with mono screen. Don't know if you've reviewed this or not but the only flaw I have found is a slightly dished glass bed.
You are new to printing so you might not be aware, with dual z-axis lead screws you need to pay attention to make sure the Gantry does not start walking higher on one side. The gantries tend to become out of sync with a dual Z axis lead screw assembly. Just some food for thought. Welcome to the world of printing, creality was my first printer as well. I've been running an Ender 3v1 for about 2 years and finally upgraded it to a new hot end. The creality machines tend to be reliable as far as I've been able to tell but I've had other machines already die on me that took way less abuse! When I say abuse I mean I kind of throw my V1 around every once in awhile when I'm transferring from one area to another or it's in the back of the truck sitting on the seat getting thrown around.
@@SteveSiegelin I first had to buy one replacement Z-axis stepper as the one nearest the control interface was bent on arrival. Creality didn't even respond to my emails (including videos) so I just paid £20 for replacement rather than send the whole machine back (which is what their customer service deserved!). Been running fine since and no noticeable tramming errors on Z-axis, although I always run a BLTouch calibration cycle before each print so that would negate one Z stepper being out of sync by a step or more.
Sometimes a lower temp also works for stringing, I had a lot at 200°C but 190° solved a lot of the stringing, but that is me, you will have to find what temps work for you
Just stumbled upon this video. I bought one of these 3 years ago and it still is doing a heck of a job. I have it connected to my OctoPrint and probably have run it for 3000+ hours at this point. Very reliable and perfect if you need to print something bigger or many small things at the same time. Obviously it's lacking the printing speed of current 3D Printers but at that price point it is very negligable. Definite recommendation from my side if someone is looking to get into 3D Printing and wants to tinker a bit with their printer.
the only other thing i wish it had is a multi filament head, you can only print in one color at a time but other then that it looks like a great printer
yeah! this video inspired me to buy my second 3d printer! ive had my first one for 3 years originally and have just been needing a larger printer! so ive been looking a while and i havent wanted to spend a ton so ive had a look at this! it looks amazing in my opinion! and works great! but i have realised on longer prints its more prone to later shift
Since I did my research this machine is my absolute favorite with the most friendly interface I’ve used on a printer and ever since I got an enclosure I’ve been printing at 250 mm/s no problem in abs
Sunlu S8. Same build volume with duel lead screws for 260 as of today. I paid less then 200 for mine in early 2020 Not comparing it to this but a solid printer for the money!
Thanks for the review, I am new to printing and want to start right away, I purchased a longer orange 10, but didn't realize the work needed for a resin printer, still a great deal at $89 used from factory with warranty, after watching your review I purchased the LK5 pro again used factory $196, for the price I dont expect much, but appreciate the honest review
I have had the Longer Lk4 for the past 4 years and am finally looking at getting another 3d printer, and this video has sealed the deal for me getting the Longer Lk5 pro. My Longer Lk 4 has been great and I even modded it to have direct drive extrusion and dual drive screws, so I figured I would stick with the Longer brand 3d printers.
I might consider this one. The sale is over at the fantastic price Nils told us about but it's still on sale from $390 down to $330. Oh, and the glass bed is coated in ceramic. It says that on their site. I love glass beds. It's all I use, but I also use Layerneer, which is awesome, and their support is great, too. I used Magigoo, which is good, but they only recommend it for a couple of filament types, plus it spoils after a few months. Layerneer never goes bad and covers every filament I'll ever use, and then some. Back to Nils... This is a great review. The shortcomings this printer has can all be resolved with self-printed solutions. It seems to me like an ideal printer for poor folks who want to go big...
This is my first and currently only printer and I can say it's definitely quite reliable and a nice machine considering it's had to deal with all of my learning 🤣 I originally did try to print with PETG however ran into so many issues with clogging, globbing, stringing, etc to the point where the hot end temp sensor got pulled out accidentally so I replaced the hot end and swapped to PLA and had little to no issues with prints. The PETG issues are most likely due to my lack of skill with 3D printing though
I have one other suggestion, for a 'rule' for unboxings and reviews.. that you assemble the printer (and first print) WITH JUST THE TOOLS/PARTS THEY SEND YOU. I have suggested this to other reviewers (because my first printer required a trip to the hardware store for tools).... The ONLY exception I would say would be if the printer does NOT come with any filament (which I would say is not right, AND that if they have any sample prints that the filament they DO INCLUDE be enough to finish the sample print).
Sounds fair. I actually haven’t had many (any?) printers that I couldn’t assemble with only what is included, which goes for this one too. I do sometimes use my electric screwdriver because it’s faster than using the included Allen keys but that’s just to save time. And I agree - they should all come with at least some filament to start with.
@@The3DPrintingZone Thank you for the response. When I was a kid the three most TERRIFYING words for a parent to hear were "some assembly required"! What tools would you need, would all the things be in there (dad bought a bicycle that did not have INNER TUBES for the tires one time!) to make it run. His solution after we got to about 10 yers old was to hand you the box and tell you the tool-room (he kept it under lock and key) was unlocked, go to town....
I print one piece wearable helmets on my cr-10s5. I would waste more filament on support than i used on the masks. I experimented and came up with a solution. Figure out at which line in your helmet slicer that supports become necessary. Write that number down. Design a cup that is close to the same diameter as the helmet (at the internal point supports are needed). Print the cup to the line height you wrote down. At that point in the helmet slicer put a "change filament command". Also start support at that line height. If your slice does not allow. Make a solid layer 2 lines thick at that height in the helmet stl. print helmet to that height. when the printer pauses. Insert cup flat side up into the center of the helmet print and use napkins to fill in gaps. Keep napkins below highest print level. Resume printing. Keep a heated hot glue gun at the ready for quick repairs. It may take a few layers to perfect itself. I save nearly 2 rolls of filament and about 3 days of print time doing this. Try it on a small couple hour print to master the technique
That's a pretty sweet technique! That way you get the benefits of printing right side up without the downsides of wasted support filament. I often print pieces upside down and at the optimal angle to avoid supports but it does create the need for extra sanding/work on the top of the helmet typically. Great idea!
I bought one of these and i didn't realize the plastic filiment guide and filiment switch on the guide was gonna fail in 2 weeks from constantly printing glow in the dark pla+ thankfully there are metal options to replace those parts apparently
9:02 how did you get the supports to be so thin do you use cura ? ugh so many settings. i just want to shave off some days on printing helmets with my upgraded Lk5pro
Stringing is due to the moisture content in the material, many 3D operators don't know how to properly store material as PLA is hydroscopic. For a hobbyist printer it looks decent but if you want precision the quality isn't there. Anytime you have to keep fiddling with adjustments and not printing in a temperature controlled chamber it is not going to be good for consistency.
I have a Longer-produced version of this printer, the Alfawise U20 ONE. The only problem that is constant is the lack of synchronicity between the dual Z axis motors. It has 6 wheels on the Y carriage and was able to print at 250nn/sec with better than average quality and 200 mm/sec with actually GOOD prints. Longer just is a solid printer, but not very complete with the current state of the art.
I was looking into getting one of those 3D printers for reviewing on my channel and for making parts for my DJI Mavic Mini. Great review and very informative.
@@The3DPrintingZone Lol.. I love flying mine too but I usually have my grandson do all my video work/flying the drone. I still play around with it though and man I love these little drones and the video quality is outstanding for what they cost.
0:44 got permission from the manufacturer? Did you mean to say that this review and opinions in it are you’re own and in no way influenced by the manufacturer?
Great review, I've had mine for about 2 months now and finally getting comfortable. Unfortunately it suddenly stopped powering on. Checked connections, fuse, and confirmed power from the outlet. Their support seems little to non existent
@@LeftyPencil Never received any support so I started doing my own testing and probing the power supply to see if I could isolate the issue. When I probed the chassis of the power supply the system suddenly reboot and I have not had any issues since
Hey this video is getting a bit older, but i just want to say, if any of you are trying to get even better bed levelling and heating on this printer, go find higher quality and at least 8+ clips for the glass bed. the four clips it comes with are good enough for anything 150-200mm but when you go bigger the extra clips put enough pressure on the bed to level it and heat it way more even towards the edges. The printer is great but the glass bed doesn't enjoy being flat (Not a material scientist) happy printing!
They seem to be upgrading on this one, as they get feedback.. I just bought one for 330$ with upgraded Metal extruder and also added "New Dual Blower Kit" to the cart on their website. Since i can see most reviewers agree that the cooling is lacking. This will be my first 3D printer, seems like you get pretty decent build volume for the money, other competitors seem to charge at least 100$ more for the same volume, and still dont give you a touch screen.
I really don't see the need for a touch screen. What makes that so much better than a non-touch screen? Especially if you have to pay more for the touch screen?
A pretty honest review, considering it's sponsored, but I wish more 3D printers were reviewed by being bought and paid by the reviewer. Especially for such a relatively cheap printer, it could be done.
I used to think that too, but honestly, when a person puts their own money on the line, they will overlook the negatives to defend their large purchase. World we live in today, this is the closest I believe an honest review can be...
@@TheSchnook This is a commercial, not an honest review... He even admits that in the start when he says he got 'permission' from the manufacturer to say some negative things... So the manufacturer got the last word in the review.
the Anet A8 plus I got last year for $180 USD its a 300x300x350 they are around $230 nowadays. you can even get the Anet ET5X 300x300x400 fro $240 right now, I just bought one a week ago
Please make a video on your knowledge and experience of troubleshooting the settings and whatnot with this thing. I've got one and have had to tighten eccentric nuts, relevel constantly, and it seems to run itno some troubles.
Excellent review! I just went ahead and bought one after watching, really excited to get my feet wet with 3d printing and this seems like the perfect one for me. I was looking for something large format but still light on the wallet, but also does decent prints. You seem pretty happy with the results, so hopefully I should be fine as a noob. Cheers!
Good luck with that. The problem I have had is simply, out of the box it works great for about a week or 2, that's when all of the headaches start. All of a sudden, the prints start not coming out the way they should. Trying to figure out what went wrong is a very, very tedious task. You will be pulling your hair out trying to figure it out. And, when you go to the reddits for help, there are a thousand different answers you will get for solving problems. Most of which I found out weren't really helpful at all. Most were "All you need to do is UPGRADE to this or that". Which, also, in my case, didn't help at all. These machines are just so damn picky on what they need in order to operate continuously. I sure hope you don't mind tinkering, because that is where your life is going. The answer to this is "That's most of the fun about 3D printing, fixing things instead of printing" Just keep in mind that this guy is getting paid for this review. His "Dislikes" are mostly aesthetic and not really informative.
@@paulreeder5241 Definitely a bought review, he doesn't even mention the single Z axis which for a printer this size is usually a bad idea and definitely something the competing printers of this size and price do usually have. Besides that, you had those issues with this printer? Because more 'mainstream' printers (Ender 3...) work out of the box and will continue to work fine for months before requiring a bed level (2 minutes) and a year or so before requiring nozzle and PTFE tube replacement (30 minutes), if you require regular maintenance just to keep it working there's something very wrong with the printer.
Thank you for taking time to film, edit and post this video. The only question I would have is what type of filament can this use, can't seem to find it anywhere?
I dont own a 3D printer but would consider getting one, however i wondered the following: 1) What do people do with all their waste junk prints, thats a lot of plastic going into landfill? 2) How easy is it to sell a 2nd hand 3D printer, it seems they are always advancing so i cant see if you get into it wanting to stick with the same model for years and years?
Why not? If it is working and making what you want, why not keep it? Especially if you have all of the kinks worked out. With a new printer, you have new problems to solve.
that single Z screw looks like a problem. a single Z screw means that the other side is going to sag (as it did with my ender 3 pro), which makes leveling the bed impossible (the bed may be "level", but that means nothing if the right side of the gantry is 10-15 mm below the left side
⚠️ help I got this printer and the bed wiggles someone suggested tightening the wheels that make the bed slide. we tried that. now I'm starting to realise that I can wiggle the bed and watch that not all the wheels move on the track depending on how the weight shifts during the wiggle.
I have an aging Creality CR-10 and was always dissatisfied with the short cables from the controller to the printer. I have an enclosure and would like to keep the controller OUTSIDE of the enclosure. I was not able to do that with my CR-10. I can't seem to find pics of how this is set up to see if I would be able to relocate the control box outside my enclosure. I print Polycarbonate and ABS so I plan to keep my enclosure very toasty.
that benchie has a high layer height is why the roof looks like that. If you do a benchie at the .06mm that most printers can do as their finest settings, he doesn't look like that.
Probably set to 230v by default because running a printer set to 230v on 110v wont work but wont hurt the electrics either, flip a switch and good to go. The same can not be said of running a printer set to 110v on 230v.
Good video. Can you recommend what sort of plastic to use for part on motorcycle that would be exposed to uv and not brittle but more flexible . Thanks
I'm new to the channel and the whole 3d thing, but it is possible to make a coloured action figure by 3d printing? I've only seen ones with one colour done so I don't know if this is possible. New sub! You explain things very well and made sure people knew the good and bad things about the 3d printer. Thank you for this!
This video sold me on this printer. I am a beginner and I now have one and have gone through two of the test prints included and am now printing a custom file that I have designed and I am wondering, "Why is it beeping as it moves along in the print job?" Any way to silence this? Thanks for the great review and I'm having a lot of fun. I thrive on frustration, it seems. Ha!!!
Would you reccomend this over the ender 3 v2 if the cost difference isn't a deciding factor? I'm looking for something that's good, but not overly expensive since I am very new to the scene
looks like a decent printer I think I might have to pick one up toss up between this and cr10. I have several e3pros but want something that can print bigger. one of my first printers yrs ago was a og tevo tarantula.
Just picked up this printer a couple days ago. My first printer, but one thing I notice is everyone’s Home Screen on the touch pad looks nothing like mine in all the videos I watch lol
I've never had one but I've found it's time to get into it. Just the amount of things I've seen you can do makes it something I want to do. That being said I'm just so overwhelmed with the options to buy a printer. Ender , Creality ..etc.. where to start? What to get ?
That’s a pretty common feeling, Patrick - and certainly understandable. It really can be overwhelming. I recommend sticking with something that is commonly supported and well established, as long as it meets your needs. Creality and Prusa, for example are affordable and highly trusted companies with some great options. If you were to try a printer like this one, I can tell you from experience that it’s a solid printer that you’d do well with but it won’t have as much of a support system as these bigger brands. Let me know if I can help you in any way.
@@The3DPrintingZone I certainly like the build volume of it. I'm thinking of I want to print larger things I might be out of luck if u want with something like an ender 3 v2
Interested to know how this compares to the Ender 5 Plus, both similar size, ED5 comes with BL touch. Right now in the UK the LK5 is about £320 and the Ender5Plus is £380 so not a huge amount in it.
Hi. I want to buy this printer and at the same time a Kit to duplicate the Z axis. I have seen several but I don´t know the length of the vertical screw of the Z axis that comes with the machine itself. Could you tell me what the measurement is to buy the correct one? Thank you so much. ☺
Hello, really wonderful and very convincing video you have. How is the technical support for the printer, by the manufacturer in case there is a problem? What would be your advice in getting a 'reel' (filament)? What size / color reel would really work? Thanks.
Since you own 23 3D printers you should make a video of what printer is the best for you and what printer you recommended for people who just start thinking of buying their first 3D printer. Thank you. :)
That's a great idea. I do have favorites and I want to try a few more that are popular for beginners so I can feel a bit more well rounded in that sense but I love the idea.
@@The3DPrintingZone looking to get my first printer asap, is this truly the best bang for my buck in terms of quality and tech options? I'm pretty comfortable with tech/software and not looking for a total noob setup with limited tuning options. Loved the video and I'm almost sold lmao but don't know if I should I keep looking / make my own? someone please help haha
@@computerwizard2613 This one really is a great one to go with, especially for the price. One other that I really was pleased with and is a great value is the Ender 3 V2. Lots of great features, very expandable and super widely used. The biggest downside is that (unlike this printer) it doesn't have a touch screen, which can be annoying. It's smaller than this printer (print volume) but it's still a decent size. Given the comparison in price, I'd go for this one.
@@The3DPrintingZone yea most likely about to pull the trigger and use your coupon over the websites 10% coupon there trying to offer me haha thank you so much and any guess on how long it will take to get to me in California, I noticed they only offer a standard shipping.
If you ever get hung up on the instructions and you have an iPad or the Samsung tablet or any kind of tablet that will do AI scan the instructions into your tablet and then use an AI app to actually walk you through setting up there’s so many apps out there that will take text or this case they can image with text and turn it into actual followintelligible guide. Just a suggestion.
I recently bough a USED ENDER 3. At that time , I printed a spiderweb and it did a fine job. I tried adjusting it , since then , and NOW it will HOME OK , but when I attempt a print , it will go to about 1/8 inch above the bed , and no lower ..........UNLESS ..... I set the Z-TRIM to -3.9 in the BABYSTEPS function...... then it prints just fine. I have tried to search out an answer to no avail. Can you tell me what is causing this ? Thank you ............................... I
Never 3D before but looking into getting started...What about how strong it makes it i would be using it for RC planes and rc cars..Would this work for that
Has anyone used the Longer LK5 to make small detailed prints? It's size is impressive but I'd mostly be printing miniatures for war games or RPGs and I'd like to know just how detailed it can be.
My Lk4 units have severe salmon skin. Have you tested it with a big high poly figure or the S3D slicer? I am interested but if it does too then for 20$ more retail I can get the X2 instead.
Fellow guitarist? So that's a guitar I designed and built over 20 years ago out of Maple. I loved the head profile of a violin and wanted to incorporate it in so that's what I put on the cutaway. I originally was going to carve the full tapering spiral into that section but I had such rudimentary tools I didn't see a way to make it happen. Still one of my favorite guitars though.
are you able to adjust z offset while printing? colleague of mine has this printer and he's not able to adjust or just not able to locate the option. i have an ender 3 v2 and i'm able to adjust it if need be.
Just sat in front of this gentleman at Church yesterday 😄. Love your thorough reviews.
Thanks so much, Adam! I'l probably see you there again today :)
Needing something larger simple and self-sustained is what I’m looking for. On a farm there are common wear parts that are not expensive but take time to get..especially with the supply chain nearly non-functional-it can take 6 months to get a 3/5.75 nylon bushing for my 45 year old seeder!…that’s where a 3D printer would be handy. For a first time buyer I’m hoping this is the printer that will work.
You should be fine with this one. Just take your time to learn it.
Nylon is hard to print you would need a new hotend and you would need to upgrade the bed and you need a filament warmers because nylon opsorbs a lot of water.
@@metalmangamer you can't be sure of those things.
@@lloydrmc
Yes he can. Nylon is notoriously one of the most difficult filaments to use.
Sovol SV03 mops this one
Printing in the middle of the bed on a large format printer doesent give a true evaluation of the printing capabilities of this printer, I would like to see all reviews show an attempt to print a 1mm deep sheet of plastic covering the whole of the bed to show the full print capabilities after all the reason you would buy a printer with a large bed is to print parts with a large bottom part, its no use having a massive bed if its so warped that you cant print on it, and if your aluminium bed is rolled and not cast its a pretty good bet its going to be warped, of course there are the odd exeptions but in my experience large beds need ABL, some have FW that enables manual mesh levelling but with a large bed this is a pain
That's a great suggestion. You can see around 8:56 that I'm printing a large print that takes up most of the bed and it worked out great but I like the idea of doing a large flat bottomed print that takes up pretty much the entire bed to see if any given printer can handle that. Could even just be a big square bin.
@@colinrobinson9858 I haven’t yet printed a full bed print because I’ve been testing several other printers lately so the full size stormtrooper helmet is the biggest print I’ve done but it came out impressively well.
Anycubic predator for the win!
@@The3DPrintingZone do you have to level it for each print?
You don’t have to level for each print. Typically you’ll level it once and then not have to for quite a few prints. It will only need to be leveled again if there’s an issue of some sort.
Got mine 2 years ago from NEWEGG.. it was on sale for $179.00 with a 10.00 dollar rebate.. it was refurbished but it was refurbished by LONGER and shipped right from LONGER.. and I can save you some time .. the LONGER LK5 PRO is a fantastic deal, I have been printing like a mad man for 2 years and love this printer.. made some changes to it as soon as I got it.. first moved the spool mount to the top.. printed a pully for filament also got a new .. then bypassed the cheap runout sensor as they do not last very long, that is why they send 2 with it.. save some time and headache and just bypass it ..then I got an extension cable for the MicroSD card and made a mount in the front of the printer right under the LCD screen.. YES THIS PRINTER IS GREAT!!!
I'm looking to dip my toes into 3D printing, and always had the old notion that printers were expensive and could only do small things. Came across this review by accident and my mind is blown. Might have to ask for one of these for Christmas :D
Nice to see longer is finding a niche elsewhere in the hobby. I only knew them for the Longer Orange, which was one of the big options at the very start of the home resin printing boom back in early 2020. After that first offering, they kinda fell off the map and left the area dominated by Elegoo, Anycubic, and Phrozen.
Just bought the Creality Cr-10 V3 as my first 3D printer (new to 3D printing but definitely not to CNC and g-code after making a mini CNC mill). With 130 discount it comes in at 389 and has dual Z-axes, direct feed print head and looks as if it uses the same basic construction as in your review, but heavier duty, has the same print volume, and does come with decent feet and cutters 🙂. Seperate power and control box with mono screen. Don't know if you've reviewed this or not but the only flaw I have found is a slightly dished glass bed.
You are new to printing so you might not be aware, with dual z-axis lead screws you need to pay attention to make sure the Gantry does not start walking higher on one side. The gantries tend to become out of sync with a dual Z axis lead screw assembly. Just some food for thought. Welcome to the world of printing, creality was my first printer as well. I've been running an Ender 3v1 for about 2 years and finally upgraded it to a new hot end. The creality machines tend to be reliable as far as I've been able to tell but I've had other machines already die on me that took way less abuse! When I say abuse I mean I kind of throw my V1 around every once in awhile when I'm transferring from one area to another or it's in the back of the truck sitting on the seat getting thrown around.
@@SteveSiegelin I first had to buy one replacement Z-axis stepper as the one nearest the control interface was bent on arrival. Creality didn't even respond to my emails (including videos) so I just paid £20 for replacement rather than send the whole machine back (which is what their customer service deserved!). Been running fine since and no noticeable tramming errors on Z-axis, although I always run a BLTouch calibration cycle before each print so that would negate one Z stepper being out of sync by a step or more.
Sometimes a lower temp also works for stringing, I had a lot at 200°C but 190° solved a lot of the stringing, but that is me, you will have to find what temps work for you
Just stumbled upon this video. I bought one of these 3 years ago and it still is doing a heck of a job. I have it connected to my OctoPrint and probably have run it for 3000+ hours at this point. Very reliable and perfect if you need to print something bigger or many small things at the same time. Obviously it's lacking the printing speed of current 3D Printers but at that price point it is very negligable. Definite recommendation from my side if someone is looking to get into 3D Printing and wants to tinker a bit with their printer.
the only other thing i wish it had is a multi filament head, you can only print in one color at a time but other then that it looks like a great printer
yeah! this video inspired me to buy my second 3d printer! ive had my first one for 3 years originally and have just been needing a larger printer! so ive been looking a while and i havent wanted to spend a ton so ive had a look at this! it looks amazing in my opinion! and works great! but i have realised on longer prints its more prone to later shift
Since I did my research this machine is my absolute favorite with the most friendly interface I’ve used on a printer and ever since I got an enclosure I’ve been printing at 250 mm/s no problem in abs
what is the max speed you think this printer could do with pla?
Sunlu S8. Same build volume with duel lead screws for 260 as of today. I paid less then 200 for mine in early 2020 Not comparing it to this but a solid printer for the money!
Thanks for the review, I am new to printing and want to start right away, I purchased a longer orange 10, but didn't realize the work needed for a resin printer, still a great deal at $89 used from factory with warranty, after watching your review I purchased the LK5 pro again used factory $196, for the price I dont expect much, but appreciate the honest review
How's it going 2 months later?
How did you get such option as for buying "used from factory"? Sound interesting
I have had the Longer Lk4 for the past 4 years and am finally looking at getting another 3d printer, and this video has sealed the deal for me getting the Longer Lk5 pro. My Longer Lk 4 has been great and I even modded it to have direct drive extrusion and dual drive screws, so I figured I would stick with the Longer brand 3d printers.
Liked and Subscribed because this review.
I might consider this one. The sale is over at the fantastic price Nils told us about but it's still on sale from $390 down to $330.
Oh, and the glass bed is coated in ceramic. It says that on their site.
I love glass beds. It's all I use, but I also use Layerneer, which is awesome, and their support is great, too. I used Magigoo, which is good, but they only recommend it for a couple of filament types, plus it spoils after a few months. Layerneer never goes bad and covers every filament I'll ever use, and then some.
Back to Nils... This is a great review. The shortcomings this printer has can all be resolved with self-printed solutions. It seems to me like an ideal printer for poor folks who want to go big...
This is my first and currently only printer and I can say it's definitely quite reliable and a nice machine considering it's had to deal with all of my learning 🤣 I originally did try to print with PETG however ran into so many issues with clogging, globbing, stringing, etc to the point where the hot end temp sensor got pulled out accidentally so I replaced the hot end and swapped to PLA and had little to no issues with prints. The PETG issues are most likely due to my lack of skill with 3D printing though
Have you tried PETG again since? Anything learned you'd like to share?
@@Airbag888 Haven't tried it since. Like I said I'm sure most of my issues were just lack of skill with 3D printing
@@raptus3049 So basically this is to this day still a great buy huh.
@@Airbag888 I'd say so
@@raptus3049 lol not quiiiite as convinced as I would've hoped haha.. anything you'd do different or recommend?
I have one other suggestion, for a 'rule' for unboxings and reviews.. that you assemble the printer (and first print) WITH JUST THE TOOLS/PARTS THEY SEND YOU. I have suggested this to other reviewers (because my first printer required a trip to the hardware store for tools).... The ONLY exception I would say would be if the printer does NOT come with any filament (which I would say is not right, AND that if they have any sample prints that the filament they DO INCLUDE be enough to finish the sample print).
Sounds fair. I actually haven’t had many (any?) printers that I couldn’t assemble with only what is included, which goes for this one too. I do sometimes use my electric screwdriver because it’s faster than using the included Allen keys but that’s just to save time. And I agree - they should all come with at least some filament to start with.
@@The3DPrintingZone Thank you for the response. When I was a kid the three most TERRIFYING words for a parent to hear were "some assembly required"! What tools would you need, would all the things be in there (dad bought a bicycle that did not have INNER TUBES for the tires one time!) to make it run. His solution after we got to about 10 yers old was to hand you the box and tell you the tool-room (he kept it under lock and key) was unlocked, go to town....
I print one piece wearable helmets on my cr-10s5. I would waste more filament on support than i used on the masks. I experimented and came up with a solution.
Figure out at which line in your helmet slicer that supports become necessary. Write that number down.
Design a cup that is close to the same diameter as the helmet (at the internal point supports are needed).
Print the cup to the line height you wrote down.
At that point in the helmet slicer put a "change filament command". Also start support at that line height.
If your slice does not allow. Make a solid layer 2 lines thick at that height in the helmet stl. print helmet to that height.
when the printer pauses. Insert cup flat side up into the center of the helmet print and use napkins to fill in gaps.
Keep napkins below highest print level. Resume printing.
Keep a heated hot glue gun at the ready for quick repairs.
It may take a few layers to perfect itself.
I save nearly 2 rolls of filament and about 3 days of print time doing this.
Try it on a small couple hour print to master the technique
That's a pretty sweet technique! That way you get the benefits of printing right side up without the downsides of wasted support filament. I often print pieces upside down and at the optimal angle to avoid supports but it does create the need for extra sanding/work on the top of the helmet typically. Great idea!
I bought one of these and i didn't realize the plastic filiment guide and filiment switch on the guide was gonna fail in 2 weeks from constantly printing glow in the dark pla+ thankfully there are metal options to replace those parts apparently
Is this a good first printer and does it work well
Man, your review was the drop to overflow. Now I ordered it. :) Thanks for the coupon code ;)
9:02 how did you get the supports to be so thin do you use cura ? ugh so many settings. i just want to shave off some days on printing helmets with my upgraded Lk5pro
I'm going to get this one, looks like a great first 3D printer, for a great price.
great 😃👍 review.
Vary informative.
The Maual and some assembly videos are on the SD card that comes with the printer.
Stringing is due to the moisture content in the material, many 3D operators don't know how to properly store material as PLA is hydroscopic.
For a hobbyist printer it looks decent but if you want precision the quality isn't there.
Anytime you have to keep fiddling with adjustments and not printing in a temperature controlled chamber it is not going to be good for consistency.
I have a Longer-produced version of this printer, the Alfawise U20 ONE.
The only problem that is constant is the lack of synchronicity between the dual Z axis motors.
It has 6 wheels on the Y carriage and was able to print at 250nn/sec with better than average quality and 200 mm/sec with actually GOOD prints.
Longer just is a solid printer, but not very complete with the current state of the art.
I was looking into getting one of those 3D printers for reviewing on my channel and for making parts for my DJI Mavic Mini. Great review and very informative.
Awesome! I'd love to hear if you end up doing that. I fly my DJI quite often.
@@The3DPrintingZone
Lol.. I love flying mine too but I usually have my grandson do all my video work/flying the drone. I still play around with it though and man I love these little drones and the video quality is outstanding for what they cost.
I have 2 of these, I put quiet ender 3 boards and flawless! Put a bigger motor on the y axis.
what supports type did you use for first order storm trooper helmet at 8:53
0:44 got permission from the manufacturer? Did you mean to say that this review and opinions in it are you’re own and in no way influenced by the manufacturer?
The Benchy has heavy ghosting next to the holes, too. I wonder where it comes from.
when he was showing the whistle my brain was blowing up i was like JUST BLOW THE Whistle PLEASSS!!!!!
Great review, I've had mine for about 2 months now and finally getting comfortable. Unfortunately it suddenly stopped powering on. Checked connections, fuse, and confirmed power from the outlet. Their support seems little to non existent
Any update on support?
@@LeftyPencil Never received any support so I started doing my own testing and probing the power supply to see if I could isolate the issue. When I probed the chassis of the power supply the system suddenly reboot and I have not had any issues since
Hey this video is getting a bit older, but i just want to say, if any of you are trying to get even better bed levelling and heating on this printer, go find higher quality and at least 8+ clips for the glass bed. the four clips it comes with are good enough for anything 150-200mm but when you go bigger the extra clips put enough pressure on the bed to level it and heat it way more even towards the edges. The printer is great but the glass bed doesn't enjoy being flat (Not a material scientist) happy printing!
After watching this video, I did some searching and wound up buying the Anycubic Kobra Max.
Is it any good? It looks great
They seem to be upgrading on this one, as they get feedback.. I just bought one for 330$ with upgraded Metal extruder and also added "New Dual Blower Kit" to the cart on their website. Since i can see most reviewers agree that the cooling is lacking. This will be my first 3D printer, seems like you get pretty decent build volume for the money, other competitors seem to charge at least 100$ more for the same volume, and still dont give you a touch screen.
Where did u purchase yours
I really don't see the need for a touch screen. What makes that so much better than a non-touch screen? Especially if you have to pay more for the touch screen?
A pretty honest review, considering it's sponsored, but I wish more 3D printers were reviewed by being bought and paid by the reviewer. Especially for such a relatively cheap printer, it could be done.
I used to think that too, but honestly, when a person puts their own money on the line, they will overlook the negatives to defend their large purchase. World we live in today, this is the closest I believe an honest review can be...
@@TheSchnook This is a commercial, not an honest review... He even admits that in the start when he says he got 'permission' from the manufacturer to say some negative things... So the manufacturer got the last word in the review.
@@someguy4915 yeah, and that is a problem. It taints the review.
the Anet A8 plus I got last year for $180 USD its a 300x300x350 they are around $230 nowadays.
you can even get the Anet ET5X 300x300x400 fro $240 right now, I just bought one a week ago
wow! this was 3 years ago. Been through 4 more printers since this. Now 2024 November I'm enjoying my new Bambu Lab A1. Didn't buy the AMS though.
I’ve lived my Bambi A1. The AMS is really great too!
5:43 280 degrees Celsius in case anyone was wondering. I knew what you meant when you said it. Thanks for review
Please make a video on your knowledge and experience of troubleshooting the settings and whatnot with this thing. I've got one and have had to tighten eccentric nuts, relevel constantly, and it seems to run itno some troubles.
You do know that the Sunlu S8 cost $240 and is 310 x 310 X 400?
🤦🏽♂️
Yeah but it has a lot of problems. Most of the time it catches on fire
Excellent review! I just went ahead and bought one after watching, really excited to get my feet wet with 3d printing and this seems like the perfect one for me. I was looking for something large format but still light on the wallet, but also does decent prints. You seem pretty happy with the results, so hopefully I should be fine as a noob. Cheers!
Good luck with that. The problem I have had is simply, out of the box it works great for about a week or 2, that's when all of the headaches start. All of a sudden, the prints start not coming out the way they should. Trying to figure out what went wrong is a very, very tedious task. You will be pulling your hair out trying to figure it out. And, when you go to the reddits for help, there are a thousand different answers you will get for solving problems. Most of which I found out weren't really helpful at all.
Most were "All you need to do is UPGRADE to this or that". Which, also, in my case, didn't help at all. These machines are just so damn picky on what they need in order to operate continuously. I sure hope you don't mind tinkering, because that is where your life is going. The answer to this is "That's most of the fun about 3D printing, fixing things instead of printing"
Just keep in mind that this guy is getting paid for this review. His "Dislikes" are mostly aesthetic and not really informative.
@@paulreeder5241 Definitely a bought review, he doesn't even mention the single Z axis which for a printer this size is usually a bad idea and definitely something the competing printers of this size and price do usually have.
Besides that, you had those issues with this printer? Because more 'mainstream' printers (Ender 3...) work out of the box and will continue to work fine for months before requiring a bed level (2 minutes) and a year or so before requiring nozzle and PTFE tube replacement (30 minutes), if you require regular maintenance just to keep it working there's something very wrong with the printer.
Thank you for taking time to film, edit and post this video.
The only question I would have is what type of filament can this use, can't seem to find it anywhere?
Valuable info. I will consider getting the LK5.
Thank you!
The dual blower updated ones are great, I got one and bought two after. They are workhorses! Just jump the filament runout sensor, thing is terrible
I dont own a 3D printer but would consider getting one, however i wondered the following: 1) What do people do with all their waste junk prints, thats a lot of plastic going into landfill? 2) How easy is it to sell a 2nd hand 3D printer, it seems they are always advancing so i cant see if you get into it wanting to stick with the same model for years and years?
Why not? If it is working and making what you want, why not keep it? Especially if you have all of the kinks worked out. With a new printer, you have new problems to solve.
that single Z screw looks like a problem.
a single Z screw means that the other side is going to sag (as it did with my ender 3 pro), which makes leveling the bed impossible (the bed may be "level", but that means nothing if the right side of the gantry is 10-15 mm below the left side
If that's your worry, check out the anet a8 plus, Similar build volume but cheaper and two z screws
⚠️ help I got this printer and the bed wiggles someone suggested tightening the wheels that make the bed slide. we tried that. now I'm starting to realise that I can wiggle the bed and watch that not all the wheels move on the track depending on how the weight shifts during the wiggle.
I have an aging Creality CR-10 and was always dissatisfied with the short cables from the controller to the printer. I have an enclosure and would like to keep the controller OUTSIDE of the enclosure. I was not able to do that with my CR-10. I can't seem to find pics of how this is set up to see if I would be able to relocate the control box outside my enclosure. I print Polycarbonate and ABS so I plan to keep my enclosure very toasty.
that benchie has a high layer height is why the roof looks like that. If you do a benchie at the .06mm that most printers can do as their finest settings, he doesn't look like that.
Probably set to 230v by default because running a printer set to 230v on 110v wont work but wont hurt the electrics either, flip a switch and good to go. The same can not be said of running a printer set to 110v on 230v.
Yeah, that makes sense. Good point.
Good video. Can you recommend what sort of plastic to use for part on motorcycle that would be exposed to uv and not brittle but more flexible .
Thanks
I git my artillery sidewinder x1 witha few upgrades for 329 so idk of this would be worth it
I'm new to the channel and the whole 3d thing, but it is possible to make a coloured action figure by 3d printing? I've only seen ones with one colour done so I don't know if this is possible.
New sub! You explain things very well and made sure people knew the good and bad things about the 3d printer. Thank you for this!
Thank you for the lovely review!
Looks comparable to the neptune 2 in terms of how pre assembled it is and how much documentation you get.
This video sold me on this printer. I am a beginner and I now have one and have gone through two of the test prints included and am now printing a custom file that I have designed and I am wondering, "Why is it beeping as it moves along in the print job?" Any way to silence this?
Thanks for the great review and I'm having a lot of fun. I thrive on frustration, it seems. Ha!!!
Would you reccomend this over the ender 3 v2 if the cost difference isn't a deciding factor? I'm looking for something that's good, but not overly expensive since I am very new to the scene
That’s what I’m wondering too
looks like a decent printer I think I might have to pick one up toss up between this and cr10. I have several e3pros but want something that can print bigger. one of my first printers yrs ago was a og tevo tarantula.
Just picked up this printer a couple days ago. My first printer, but one thing I notice is everyone’s Home Screen on the touch pad looks nothing like mine in all the videos I watch lol
Could be because they have upgraded the firmware.
@@paulreeder5241 ahh gotcha
Well I know the printer I’m going to get when I have the money. Thanks for the video
I build a 4 foot high Delta printer. It's got a 2x3 foot envelope.
Nice!
I've never had one but I've found it's time to get into it. Just the amount of things I've seen you can do makes it something I want to do. That being said I'm just so overwhelmed with the options to buy a printer. Ender , Creality ..etc.. where to start? What to get ?
That’s a pretty common feeling, Patrick - and certainly understandable. It really can be overwhelming. I recommend sticking with something that is commonly supported and well established, as long as it meets your needs. Creality and Prusa, for example are affordable and highly trusted companies with some great options. If you were to try a printer like this one, I can tell you from experience that it’s a solid printer that you’d do well with but it won’t have as much of a support system as these bigger brands. Let me know if I can help you in any way.
@@The3DPrintingZone I certainly like the build volume of it. I'm thinking of I want to print larger things I might be out of luck if u want with something like an ender 3 v2
Interested to know how this compares to the Ender 5 Plus, both similar size, ED5 comes with BL touch. Right now in the UK the LK5 is about £320 and the Ender5Plus is £380 so not a huge amount in it.
Ordered this one, 299$ cant go all wrong...
Just to be ready for when it come, where is the assembly guide you mentioned in video? :)
Hi.
I want to buy this printer and at the same time a Kit to duplicate the Z axis.
I have seen several but I don´t know the length of the vertical screw of the Z axis that comes with the machine itself.
Could you tell me what the measurement is to buy the correct one?
Thank you so much. ☺
I wanna print modular peices to assemble a film set flat when needed.. this could work but that's hella peices to print
wait can you print the mando helmet without the middle supports?
Hello, really wonderful and very convincing video you have. How is the technical support for the printer, by the manufacturer in case there is a problem? What would be your advice in getting a 'reel' (filament)? What size / color reel would really work? Thanks.
I'm buying this printer. Thanks
I bought it too
thank you very much
Since you own 23 3D printers you should make a video of what printer is the best for you and what printer you recommended for people who just start thinking of buying their first 3D printer. Thank you. :)
That's a great idea. I do have favorites and I want to try a few more that are popular for beginners so I can feel a bit more well rounded in that sense but I love the idea.
@@The3DPrintingZone looking to get my first printer asap, is this truly the best bang for my buck in terms of quality and tech options? I'm pretty comfortable with tech/software and not looking for a total noob setup with limited tuning options. Loved the video and I'm almost sold lmao but don't know if I should I keep looking / make my own? someone please help haha
@@computerwizard2613 This one really is a great one to go with, especially for the price. One other that I really was pleased with and is a great value is the Ender 3 V2. Lots of great features, very expandable and super widely used. The biggest downside is that (unlike this printer) it doesn't have a touch screen, which can be annoying. It's smaller than this printer (print volume) but it's still a decent size. Given the comparison in price, I'd go for this one.
@@The3DPrintingZone yea most likely about to pull the trigger and use your coupon over the websites 10% coupon there trying to offer me haha thank you so much and any guess on how long it will take to get to me in California, I noticed they only offer a standard shipping.
How do you print off a photo? Need to cover this.
No auto bed leveling? Does it have a fillament change feature?
The smallest nozzle it can't print is a .4mm?
What kind of infrared temperature measuring device are you using?
If you ever get hung up on the instructions and you have an iPad or the Samsung tablet or any kind of tablet that will do AI scan the instructions into your tablet and then use an AI app to actually walk you through setting up there’s so many apps out there that will take text or this case they can image with text and turn it into actual followintelligible guide. Just a suggestion.
That’s not a bad idea! I’ll have to try this. Thanks for watching and commenting!
I recently bough a USED ENDER 3.
At that time , I printed a spiderweb and it did a fine job.
I tried adjusting it , since then , and NOW it will HOME OK , but when I attempt a print , it will go to about 1/8 inch above the bed , and no lower ..........UNLESS ..... I set the Z-TRIM to -3.9 in the BABYSTEPS function...... then it prints just fine.
I have tried to search out an answer to no avail.
Can you tell me what is causing this ?
Thank you ...............................
I
I am looking to create 12 " tall, detailed warriors can this handle that?
I was just looking at this printer as a potential candidate for larger prototyping projects
Never 3D before but looking into getting started...What about how strong it makes it i would be using it for RC planes and rc cars..Would this work for that
Just bought a longer lk5 pro but cannot program layer height . Resulting to paused print unable to resume on cura
Can’t wait to see the video about the easy threed printer line of printers
How do you deal with ventilation with a setup like this? Doesn't seem too safe.
All I'm seeing is an almost one to one upside ender. Which I'm happy with mine and I'm a firm believer in if it ain't broke dont fool with it.
What filament and settings did you use for the stormtrooper helmet?
Did you mention auto leveling? If it comes stock or do I need to upgrade.
What is better flexi-filament or polymer resin?
Exactly who manufactures the gold filament seen in this video, and exactly what material is it? ABS, PTG, PLA, what?
That's PLA made by CC3D. Here's the link: geni.us/iT3Y
Sunlu s8 is same size but a lot cheaper. The s8 plus is the one I have and that's cheaper too. Mine works well but I did not leave their firmware on.
Great for you
Has anyone used the Longer LK5 to make small detailed prints? It's size is impressive but I'd mostly be printing miniatures for war games or RPGs and I'd like to know just how detailed it can be.
What's the difference between lk1 vs lk5 I need another printer . Should I spring for the lk5 if I'm used to the lk1 ?
My Lk4 units have severe salmon skin. Have you tested it with a big high poly figure or the S3D slicer? I am interested but if it does too then for 20$ more retail I can get the X2 instead.
Nice review.... but what is that guitar? I'm curious about the one on the left with the single coils.
Fellow guitarist? So that's a guitar I designed and built over 20 years ago out of Maple. I loved the head profile of a violin and wanted to incorporate it in so that's what I put on the cutaway. I originally was going to carve the full tapering spiral into that section but I had such rudimentary tools I didn't see a way to make it happen. Still one of my favorite guitars though.
@@The3DPrintingZone Yeah, I play a little. Its a relaxing way to annoy everyone in the house. lol. Your design is cool. Thanks for replying.
Can this printer use clear filament?
are you able to adjust z offset while printing? colleague of mine has this printer and he's not able to adjust or just not able to locate the option. i have an ender 3 v2 and i'm able to adjust it if need be.
I paid 1000 for my CR-10s5 500x500x500 It takes alot of work dialing it in. My ender3 I never need to adjust.
Is it possible to print in multicolored?