GEPRC Mark 4 Clone Build - 07. Eachine TX805 Video Transmitter Install (VTX)
HTML-код
- Опубликовано: 26 окт 2024
- This is a build series of the GEPRC Mark 4 Clone Frame (5 inch)
In this video I install the Eachine TX805 Video Trasmitter (VTX).
Instructions on how to manually change power and channel settings on the VTX can be found here:
(section: Button control Channel select mode)
www.eachine.co...
-- Playlist for the rest of the build --
• GEPRC Mark 4 Clone Build
-- Quadcopter Components --
-- Frame --
GEPRC Mark 4 Clone (5 inch)
s.click.aliexp...
-- Flight Controller + ESC Stack --
Omnibus F4 V3S Plus
45amp 4in1 (55amp burst)
s.click.aliexp...
-- Motors --
iFlight Xing 2207 2750kv
s.click.aliexp...
-- Video Transmitter (VTX) --
Eachine TX805
s.click.aliexp...
-- Camera --
Caddx Ratel 2
s.click.aliexp...
-- Radio Receiver --
Radiomaster R81 (FrSky D8 Mode)
s.click.aliexp...
-- Radio Controller --
Jumper T-Lite (JP4IN1 Version)
s.click.aliexp...
-- Smoke Stopper --
ViFly ShortSaver 2
(handy accessory to prevent electrical shorts)
Email
nxp200@gmail.com
![☀ Почему все эти замеры - фуфло? Паяем MMCX. Лучший бюджетный VTX. 800mw+SmartAudio [Eachine TX5258]](http://i.ytimg.com/vi/CGTyesgQmF0/mqdefault.jpg)
Your workspace is so clean 😍
Eu aprendi algumas coisas 😁👍👏
good morning all the videos. please continue with the video configuration on betaflight and video of the first flight thank you
Yep, definitely will get to them. I've recently moved house and been too busy. Hopefully back on track soon!
Good jub 🥰
Hi! I cannot find your mount for the VTX, it looks very clean that way. I just finished installing mine with zip ties and I feel bad now haha. I'd like to redo it your way :)
Any ideas on when you plan to release the RX install video ? I'm curious to see how you are going to mount it!
The VTX mount is one I designed and printed myself. You can find an updated version of the .stl here: www.thingiverse.com/thing:4944171. I try to avoid zip ties where possible like this VTX, but sometimes I still have to for smaller components like the RX. On that note, sorry I've delayed the release of the RX video because I've just moved house and haven't had time to finish the edit, hopefully soon though (a couple of days I hope)! You'll see the updated version of the VTX mount in that video.
Pardon my noob question but can I connect the video wire from the camera to the video-in wire from the vtx directly without passing through the flight controller?
Yep. You can. However, you won't be able to get Betaflight OSD to show in the goggles this way. But you'll be able to fly FPV at least.
Is eachine tx805 still worth it? Or i should go for rush tank II ultimate? Its a bit pricey though i just want create a budget fpv drone with good quality
The TX805 has been great for me so far. The range isn't excellent, but I fly in close range doing freestyle. Unfortunately haven't had a chance to try the Rush tank yet, but it's twice the price, so if your going for budget build, I'd stick with the TX805. Hasn't burnt out on me yet!
@@nxp200 alrightt thankyou for fast reply, i will go for tx805, im almost using the same setup as yours thankyou for helping me building my first quad
@@nxp200 is jt okay if the antenna cable touch the frame's metal standoffs? Will it make an interference? My vtx and receiver is very near with the metal standoffs
If you're referring to the insulated section of the antenna cable, then no, it shouldn't be a problem.
@@nxp200 alright, im already finish my first fpv drone build, really appreciate your build tutorial it helps me a lot, you deserve more subss. Thank youu
How do you unlock this vtx? 🤔
Not sure what you mean by "unlock", but if you're referring to changing the channels and increasing the power output, there are instructions (I've added a link to this video description) on how to do it manually using the onboard button and LED sequences. The other method is to use SmartAudio control via Betaflight. Hope that helps!