Around 22$ for the parts + work, it's on the edge of too expensive. On deals day's you can get a new controller for 50$. Great product, should the price get lower will increase popularity.
I think 21€ for the parts + 5€ of shipping is a high price for only avoid jittering (considering that you can calibrate the joysticks manually, not to accurate or easily with pcb, but doable manually). But i think you make a great job, making the product and tutorial by yourself Hope in some months we will have some cheaper pcb's 😁
The yellow hall effect sticks have better base module build than this blue and green (alps with hall effect modules) , maybe you can mix it to get way better stick than this both yellow and blue/green. I mean Yellow stick base and blue/green hall module
Muchas gracias por tu consideración!! se aprecia ya que yo estoy muy interesado pero por el precio no me convencía demasiado por qué por 4 módulos joysticks + el pcb podía comprarme otro control de otra marca con efecto, pero ahora por fin podré solucionar este problema con mi control de Xbox :') se aprecia, sigue así, llegaras muy lejos! Saludos desde México
apenas me paguen el proximo mes te compro un par de esos para mis controles de ps4 y mi control de xbox one elite 1 se ve muy interesante tu producto, saludos desde colombia !!!
We are in the 21st century, why invent expensive calibration boards for analogs? Calibration programs are already available, we just need a good programmer who could improve these programs.
un Gamesir t4 kaleid o g7, pero un dualsense no, aparte yo lo veo útil para controles de edición limitada o especiales o si solo tienes un único que quieres que te dure muchos años más
I think the next thing to solve is installation. Maybe there is a way to enable pre installation and pre calibration of the board to the sticks, if the board doesn't sit on the bottom anymore, but maybe the stick is shorter and the board sits on top / becomes part of the stick. There is also interference with the triggers beeing pulled on the left stick on xbox.
Hello, the interference on the left side of the xbox controller that I used to fix with the V41 version of the driver board has been solved well. Is that why there is a separate version of v41
Would the board work with any hall effect analog stick or would it just be the ones you're selling? Thank you.
Around 22$ for the parts + work, it's on the edge of too expensive. On deals day's you can get a new controller for 50$. Great product, should the price get lower will increase popularity.
Yea but when the new controller goes bad you’ll end up paying a lot more to get another one. With this Hall effect kit, it will never get stick drift
Hello… you will send to Brazil? For some reason AliExpress don’t send to Brazil from your store 😢
A switch pro controller version would be pretty nice too!
Still under development, please wait
I discovered JunZeng channel from a video in VksChannel ! Thanks!!
Link to buy them or how do I search for them? So many options come up on aliexpress
I think 21€ for the parts + 5€ of shipping is a high price for only avoid jittering (considering that you can calibrate the joysticks manually, not to accurate or easily with pcb, but doable manually).
But i think you make a great job, making the product and tutorial by yourself
Hope in some months we will have some cheaper pcb's 😁
Where is Aliexpress link?
pt.aliexpress.com/item/1005005918396855.html?gatewayAdapt=glo2bra
Hello ! Great Work there.
Can you post the Ali link ?
Thanks
pt.aliexpress.com/item/1005005918396855.html?gatewayAdapt=glo2bra
Thank you for your honourable work 🙏
Thank you for your attention.
The yellow hall effect sticks have better base module build than this blue and green (alps with hall effect modules) , maybe you can mix it to get way better stick than this both yellow and blue/green. I mean Yellow stick base and blue/green hall module
Yes, I already know the difference between them. I can provide the mechanical structure of the good black module separately.
@@junZeng-520 That would be awesome 🖤
@@junZeng-520when?
@@saadabdullah4245 I give retail customers who buy my kits additional mechanical modules to install as needed.
Hey where can I find your Aliexpress store?
I want to buy the Sticks
pt.aliexpress.com/item/1005005918396855.html?gatewayAdapt=glo2bra
@@junZeng-520 Thanks, sadly no Dilivery to Germany :(
Muchas gracias por tu consideración!! se aprecia ya que yo estoy muy interesado pero por el precio no me convencía demasiado por qué por 4 módulos joysticks + el pcb podía comprarme otro control de otra marca con efecto, pero ahora por fin podré solucionar este problema con mi control de Xbox :') se aprecia, sigue así, llegaras muy lejos!
Saludos desde México
Aliexpress says no delivery to Germany ? Why, I need this !
Germany has the strictest laws and I have to deal with packaging laws and WEEE.
thanks for the clarification !@@junZeng-520
and i hope you find a way to ship it to germany
please organize shipping to Germany
I want to buy a couple of sets for ps5 and ps4. But when I go to check out it wants to charge me for 2 different order shipping. Can it be combined?
Can be combined, please contact me.
apenas me paguen el proximo mes te compro un par de esos para mis controles de ps4 y mi control de xbox one elite 1 se ve muy interesante tu producto, saludos desde colombia !!!
You are the best!🤝
Fantastic
When someone buys from AliExpress, do you get TWO joysticks and accompanying boards? Or just the one for $18?
Yes, for $18, you get two joysticks and two drive plates and the materials you need to mount them.
We are in the 21st century, why invent expensive calibration boards for analogs? Calibration programs are already available, we just need a good programmer who could improve these programs.
500$??? Oh nooo... por 100$ o 150$ me conviene comprar otro dualsense
Haha, not that expensive
un Gamesir t4 kaleid o g7, pero un dualsense no, aparte yo lo veo útil para controles de edición limitada o especiales o si solo tienes un único que quieres que te dure muchos años más
You are a legend my friend keep up the good work!
Does this support Xbox Series X controller?
Can be used with xbox controllers, model 1708 or later
I think the next thing to solve is installation. Maybe there is a way to enable pre installation and pre calibration of the board to the sticks, if the board doesn't sit on the bottom anymore, but maybe the stick is shorter and the board sits on top / becomes part of the stick.
There is also interference with the triggers beeing pulled on the left stick on xbox.
Hello, the interference on the left side of the xbox controller that I used to fix with the V41 version of the driver board has been solved well. Is that why there is a separate version of v41