A pleasure to watch your videos. You take a lot of the mystery out of how things come apart and go back together. You do very good work, as shown by the other two trucks you did before.
Seguí tu publicación de c10 63 mientras avanzaba mi proyecto c10 63, me compartiste el color hace unos años y fue un éxito, muy útil tus videos para armar mi pick up, ahora está funcionando. Recién adquirí una apache 59 y que sorpresa ver qué también está restaurando una igual, estoy confiado en que tengo sus videos de apoyo para este nuevo proyecto similar
Im in the process of building a 59 Viking, very similar truck just a wider front end.. I love the 55-59 Chevy/GMC Trucks! Glad your video came up in suggested! 👍
Normal stuff from sitting. Wheel cylinders, rubber brake lines...probably parked it because it needed a clutch. Beautiful truck dude. I get the feeling you're going to keep it factory. Nice work as always Steve!!!
Hey gibson, nice truck looks like you got good hinges by the way the door closes, my 55 has bad hinges and rusted lower hinge pocket on drivers door not a lot of videos out on those repairs, so your lower door repairs on the 63's are going to really be helpful, although on the 55-59 the lower hinge is on the hinge bracket in the inner pocket, sence i have to replace the inner lower door getting the bracket back in the correct spot is going to be critical for door alignment, thanks for your videos
Looking forward to seeing this one progress. Are you planning on staying with the stovebolt or ??? Valvetrain sounds like it needs adjustment, replacement, or isn't getting oil. Spent lots of time over the past decades dealing with smallblocks but "cut my teeth" on these animals. Need to have one more !!
@@Gibson63. Kool !!! Hopefully you will get into dual exhaust and maybe dual carbs. That's what I would shoot for if I turned up a six cylinder Chevy. 👍👍👍 Any case, always enjoy watching your work !!!
@@pappabob29 I will keep you in mind Pappa Bob when I get ready to put my 63 C10 shorty FltSd with 250 I6 three on the tree up for sale. As I was telling Gib I'm just getting to old for this type of fun anymore... Keep On Trucking 👍...
@@dustinsirrine227 Thank you Dustin. That's very kind of you. Unfortunately, like you, at 76, I'm at a point where I'm not sure I'm going to have enough time to finish the three projects I already have. Check out my "The Blue Heinz Gets A Update" playlist to see the project I'm currently doing with my son Scott. Given the good fortune to look for a older six cylinder Chevy, I would look for a 49 or 50 Chevy Coupe or Fleetline. Love those dash boards with the vertical radios.
@@pappabob29: I always liked the 51 Chevy's sweet Old Ride's... You have fun with your Son making many memories that he will have in his heart to pass them on to his Son someday... I will check out your videos and Thanks Pappa Bob us older Chevy guys sure had the best era to grow up in didn't we ! You have fun and enjoy your blessings each day my friend. Keep On Trucking 👍...
She's moving that's a good thing and she just needs some attention here and there. She's a sweet old ride sure didn't change much in the drive line from that 59 to a 63 did they Gib. Is your Bro going to keep her just the way she is or have you do a engine an tranny change over and body work like your 63 or make it like Pop's 63? Any way you make it she's going to be on the road again and that's what those old Chevy Truck's need. Can't wait to see you taking her down the road for a spin Brother. Keep On Trucking Brother 👍...
My brother really just wants to get the old truck up and running maybe some rust repair/ cab corners, straighten out the fender don’t know it looks a little rough will see, probably re-wire from Front to back, more than likely will keep the straight six like it is
@@Gibson63. Cool I think that's great Gib, it's going to be a nice truck when you get her back to being road legal and your brother will be enjoying the car shows with you and Pop's before to long... I'm getting use to my old 63 C10's inline 6 and starting to think twice about dropping in the 327 I had rebuilt to take it's place. I'm getting old and getting down on my old knee's isn't as easy as it use to be so that's a big factor in me making the changes LOL... Gib I really enjoy your videos thanks for sharing with us all my friend. Can't wait for the next video... Keep On Trucking Brother 👍...
T.y. for your video Sir I'm a backyard mechanic and I appreciate you.
Watching you work allows us an opportunity to pickuo tricks of the trade. Thanks for taking the time to video, its appreciated!!! w.w.
The old girl needs a little love but she is in good hands, will be a sweet ride when your done.
A pleasure to watch your videos. You take a lot of the mystery out of how things come apart and go back together. You do very good work, as shown by the other two trucks you did before.
Old cars are some of the simplest vehicles to learn mechanics on!!
Seguí tu publicación de c10 63 mientras avanzaba mi proyecto c10 63, me compartiste el color hace unos años y fue un éxito, muy útil tus videos para armar mi pick up, ahora está funcionando.
Recién adquirí una apache 59 y que sorpresa ver qué también está restaurando una igual, estoy confiado en que tengo sus videos de apoyo para este nuevo proyecto similar
Mr. Gibson sir, I am so glad you are back.
Still working on my 62' Chevy.
Your attention to detail is epic.
For being a Tx. truck the rust on it is very little so that's awesome. Again thanks for these videos will be standing by for the next one .
I just bought a 62 c10, your channel is awesome.
Nice to see it move under its own power. Cool stuff buddy.
Great to see a great truck back to running again.
Thanks man
Man, my 58 Apache is so close to being on the road too. Love them old trucks
Old memories watching you do this old Apache. My G Pa had one and he used to let me climb down there and step on the starter button in the floorboard.
Awesome video brother…I’m looking to get this year and model.
My son and I went by on the motorcycles Sunday, I should have stopped and said hi. You and Scott are making want another early 70s c10.
Beautiful truck. I look forward to your videos more than any other I subscribe to. You are such an inspiration! Keep 'em coming.
That’s a pretty nice old truck. I like it. Can’t wait to see what you do with.
Im in the process of building a 59 Viking, very similar truck just a wider front end.. I love the 55-59 Chevy/GMC Trucks! Glad your video came up in suggested! 👍
Like your style working on the truck 👍🏽👍🏽
Great to see new videos from you and a nice chevy truck. I'm getting me some popcorn for this new series. Fuck Netflix. Regards.
LOVE IT! Thank you for the video! Helps me with my 58 Apache!
Give me old iron any day thanks Steve🤠👍🔨
Nice to see you back at it Mr. Gibson! Look forward to more videos of the old girl. Cheers, Doug
Sweet access hole for working on that U-joint! How convenient! Good to see it move on it’s own.
Normal stuff from sitting. Wheel cylinders, rubber brake lines...probably parked it because it needed a clutch. Beautiful truck dude. I get the feeling you're going to keep it factory. Nice work as always Steve!!!
The old donkey ended up in lovin, kind, talented hands and is feeling better already.
I like the front end on that 59. Another good project.
Looks like a keeper!
nice truck well done sir
Your videos are always awesome buddy thank you so much! I have learned a lot from you
Im really excited for this. Ive diggin through my 59 and look forward to learning a lot for this truck! keep up the great content!
Hey gibson, nice truck looks like you got good hinges by the way the door closes, my 55 has bad hinges and rusted lower hinge pocket on drivers door not a lot of videos out on those repairs, so your lower door repairs on the 63's are going to really be helpful, although on the 55-59 the lower hinge is on the hinge bracket in the inner pocket, sence i have to replace the inner lower door getting the bracket back in the correct spot is going to be critical for door alignment, thanks for your videos
I think I’m pretty lucky on these door hinges they seem to be in good shape thanks for watching
They sell exact reproduction hinge pockets, just have them welded in.
@@christinewoodruff255 oh yeah I all did that, I was just committing on Gibson’s truck it is a whole different setup then my 55
Love this channel bud
Great vid...thanks
Flogging on another one!! Here we go Gibson!!
Nice old pickup , good to see it moving . Build On
Thanks
Love the apache, you do an awesome job!
Currently watching this in my 1959 Apache
Going to be awesome
Que belleza de camioneta la 59
Doin good work as always brother. Keep it up!
One step at a time.
sweet one there bro,were do you find them all hahaah keep the vids coming this one gonna be one ive always wanted
JUST TO FIND AN OLD TRUCK ALL TOGETHER IN GOOD CONDITION IS RARE.
Good stuff.
Excellent video! I have a 59 apache. Could you tell me what is the length of the transmission shaft? Thanks.
Dang pesky wheel cylinder wasn’t coming out of there...lol
Hahaha
Keep chipping away Gibson. She will be a good driver soon.
Looking forward to seeing this one progress. Are you planning on staying with the stovebolt or ??? Valvetrain sounds like it needs adjustment, replacement, or isn't getting oil. Spent lots of time over the past decades dealing with smallblocks but "cut my teeth" on these animals. Need to have one more !!
Yes planning on keeping the six in this pickup.
@@Gibson63.
Kool !!! Hopefully you will get into dual exhaust and maybe dual carbs. That's what I would shoot for if I turned up a six cylinder Chevy. 👍👍👍 Any case, always enjoy watching your work !!!
@@pappabob29 I will keep you in mind Pappa Bob when I get ready to put my 63 C10 shorty FltSd with 250 I6 three on the tree up for sale. As I was telling Gib I'm just getting to old for this type of fun anymore...
Keep On Trucking 👍...
@@dustinsirrine227
Thank you Dustin. That's very kind of you. Unfortunately, like you, at 76, I'm at a point where I'm not sure I'm going to have enough time to finish the three projects I already have. Check out my "The Blue Heinz Gets A Update" playlist to see the project I'm currently doing with my son Scott. Given the good fortune to look for a older six cylinder Chevy, I would look for a 49 or 50 Chevy Coupe or Fleetline. Love those dash boards with the vertical radios.
@@pappabob29: I always liked the 51 Chevy's sweet Old Ride's... You have fun with your Son making many memories that he will have in his heart to pass them on to his Son someday... I will check out your videos and Thanks Pappa Bob us older Chevy guys sure had the best era to grow up in didn't we ! You have fun and enjoy your blessings each day my friend.
Keep On Trucking 👍...
Don't get bit I mean.
What gear oil did you use ,Lucas?
Hey! What’s that tool you used to check the transmission oil level? Is it old school?
Lol! Don't get not any spiders Gibson!! I see a lot of webs?!
I’m watching for them also no doubt
Those shocks with swirls are factory
any new videos
Wonder why the shaft was pulled out the transmission, for what reason.
The previous owner was in the process of working on the motor before he sold it
You need a hand pump for your rear end gear oil!!
She's moving that's a good thing and she just needs some attention here and there. She's a sweet old ride sure didn't change much in the drive line from that 59 to a 63 did they Gib. Is your Bro going to keep her just the way she is or have you do a engine an tranny change over and body work like your 63 or make it like Pop's 63? Any way you make it she's going to be on the road again and that's what those old Chevy Truck's need. Can't wait to see you taking her down the road for a spin Brother.
Keep On Trucking Brother 👍...
My brother really just wants to get the old truck up and running maybe some rust repair/ cab corners, straighten out the fender don’t know it looks a little rough will see, probably re-wire from Front to back, more than likely will keep the straight six like it is
@@Gibson63. Cool I think that's great Gib, it's going to be a nice truck when you get her back to being road legal and your brother will be enjoying the car shows with you and Pop's before to long... I'm getting use to my old 63 C10's inline 6 and starting to think twice about dropping in the 327 I had rebuilt to take it's place. I'm getting old and getting down on my old knee's isn't as easy as it use to be so that's a big factor in me making the changes LOL... Gib I really enjoy your videos thanks for sharing with us all my friend. Can't wait for the next video...
Keep On Trucking Brother 👍...
Dustin Sirrine I think his bro needs to be in the garage helping out his bro!!
How bout a napco convertion?
Hi my friend Can you help me where to buy spare parts for that car, please help me to put spare parts links
Parts came from (Classic parts)
what's not to like?
Wanna buy my 72.
Will you be my brother