hi, than you for this informative video, I have got a PROBLEM: I did every single thing u made in Grasshopper, but I still get "data conversion failed from curve to surface rhino", would you please help me out?
For people who are searching to flip the bench. The only way it worked for me was to add a 'flip plane' after the 'perp frame'. Then connect toggle switches ('boolean toggle') to the 'flip plane'. Double click the toggle to flip in the desired axis.
@@ParametricHouse hi, im facing the issue and have to use flip plane 2 times to get the correct orientation, but can I know why grasshopper behaves like this? because I follow your tutorial and still can't figure out why it goes upside down 100% of the time
Thank you very much for such a helpful video. Just a little question: When I connect the 3 number slider to the perp frame's parameter, it only takes 1 and on the curve there's only 1 section even though I already selected 3 sections and 3 curves in order. What do you think the problem is? Thank you
Hi, thanks for the videos! Could you please explain how do i change the curve without affecting the position of the perpendicular plain? Thank in advance!
Thank you for your tutorial, it's amazing. i have a question, so i did everything you explained but there is a problem that my curves intersection are rotated in minus z direction, i mean instead of being in a right direction they are in the opposit. it seems the bench is rotated. i dont know ehat i did wrong. can you help me out please?
I cant connect more than one number slider into the parameter input on the perp frame componant? This was possible in the video. Any ideas why it wont work? Completed exactly the same steps. Thanks JP
very cool, I am curious if it is possible to divide the object so that the distances between the elements are different as well as the thicknesses of these elements (can it be done easily in a softwere)
I have a problem. When I connect the "Perp Frame" component to "Brep Plane" component, and try to create more sections of the sweep surface, but the result come out is that some sections are not perpendicular to the curve or path, and also not according to the parameter of "count", for example, I input 10, but it output 15 sections, and the 5 more sections are the twisted sections. I tried redraw the path as well as the sections. But it didn't work.
How can I set the dimensions of the sections? Let's say I want to manufacture the bench using CNC. I would have to make the right calculations and have the dimensions on point. Seating level should be at around 45 cm from ground level, while the thickness of each section should be 2 cm for example. Also the gap between each section should be 1 cm.
Unfortunatrly no! Grasshopper tries to keep its tools as simple as possible and that's why its powerful! You can combine the move,extrude thing to a new tool and have it for future use!😊
@@ParametricHouse it would be awesome to have a tutorial of that kind of stuff, recomendations of tools and combinations. Thanks you so much for the tutorials that you have been uploading, they are amazing and really easy to understand
hey bro i tried to use deconstruct brep in the middle of the process, with the generated surfaces but when I tried to selec the vertices grasshopper give me one vertice in other position about the others, can you help me with that ?
is it possible to import the curves into rhino and quickly use imported curves? for example, using a 3d scanned curve. ? or do I have to design the curves myself in order to have this functionality? thanks for the advice
For those that had the same problem I had were the the 3 curves were flipped and the comment didnt work for you guys what I did was to rotate the curve in the rhino instead of modifying the grasshopper parametrics. Hope this help you guys.
I'm stuck with reversed AND twisted sections. Tried flip plane, flipping the rail, rotating the sections 180 degrees.Tried everything again from the beginning, with special attention to orders and details. Nothing. Could really use some help.
Thank you for the tutorial very helpful! I have an issue with the sections. I am designing a long and curvy bunch and when it's curved the sections are overlapping each other. It semis there is a problem with the direction. do you have an a solution for it? thanks a lot.
How did you set your grasshopper components to read their full names for the inputs/outputs? Mine only reads a single letter for each and i need to hover above it in order to find out which input/output it is
In first Thank you so much for the tutorial ! Maybe you have some tips to create and export the sections of this kind of parametric creation ? For example, if I want use a CNC to cut a wood panel to create the bench ?
In case anyone else had this problem; the conversion between two of my curves caused one of the sections along the rail to not close properly. I identified the area where the conversion was having trouble and when adjusted the points on one my curves, the error went away c:
hi, thanks for the tutorial. problem: when applying the sections to the curves, the middle one twists. result is a twisting shape. any help? thanks in advance
I was having the same issue. I think it has something to do with the direction or flip of the section drawing. I ended up redrawing the sections in the file and the twist went away for me.
Hey, I’m having an issue with showing the full words of the of the task, I am just getting a D for direction and S for section etc. If you know how to display the full words that would be very helpful to my learning
thank you for your tutorial. I like the way you explain detail why it done rather just step by step tutorial.it helps a lot. but i have i problem by section are extrude accordingly by the order I draw them. it randomly arrange. maybe u can explain how to make them arrange accordingly.
Do u mean you want to connect two number sliders to an input? Hold down shift for several outputs to one input..also watch the grasshopper basics for more info about how grasshopper works
Make sure that your line drawings don't have any duplicated lines and that they are joined together. Clear all values in grasshopper and go back and select each line to make sure they aren't overlapping. I had the same problem and that fixed it for me
First you should use "Orient" component and do the nesting process. This tutorial might help for that: parametrichouse.com/parametric-bench-1/ Then you can easily bake the sections and export them from Rhino as a dxf file.
Here i am sending you a pic where i am little bit confusion as well as will working on xy plan sweep rail is getting opposite direction means 180 degrees or please if you are comfortable please send me an email id where i can upload a image where i am going wrong.
Download the example at : parametrichouse.com/parametric-bench/ Want to learn Grasshopper, step by step? Check out our Grasshopper Course at: parametrichouse.com/course-grasshopper/
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
A BIG BIG THANKS FOR THE TUTORIAL
thanks for good tutorial!! i did it 4 times!! it was so difficult for me but good tutoriall! thank you!
I just want to let you know that I learned a ton from you!!!!!!!! thank you for uploading!!!!!!!
🙏
Hey coders! If you're having trouble with your cross-sections being rotated, attach the "Perpendicular Frames" mod to "Flip" mod and then to "Target"
which flip mod, iam not getting
Very best made multi object with Grasshopper,
really interesting
Thank you!! I had some of the problems mentioned down below but I kinda figured my way out of them. Loved this tutorial
I would appreciate your considering this. I need to know more about this software to start, actually, I find myself really interested in
thank you so much for tutorial !! but I can't connect multiple "number sliders" on "perp frame". I can only connect one. how can I solve it?
👋
Hold down the "Shift" key to connect multiple inputs
thank you for the question.I am having same problem.
hi, than you for this informative video, I have got a PROBLEM: I did every single thing u made in Grasshopper, but I still get "data conversion failed from curve to surface rhino", would you please help me out?
I love this video!
Thank you so much
For people who are searching to flip the bench. The only way it worked for me was to add a 'flip plane' after the 'perp frame'. Then connect toggle switches ('boolean toggle') to the 'flip plane'. Double click the toggle to flip in the desired axis.
Great idea Bernard, thanks for the feedback
u r a god
Great, thanks!
hi- can you please send me a screen shot?
@@ParametricHouse hi, im facing the issue and have to use flip plane 2 times to get the correct orientation, but can I know why grasshopper behaves like this? because I follow your tutorial and still can't figure out why it goes upside down 100% of the time
Очень простой и быстрый алгоритм! Спасибо! 🌼
🙌🙏
wow you always make it look like it's easy to do.. 😂
Thank you very much for such a helpful video. Just a little question: When I connect the 3 number slider to the perp frame's parameter, it only takes 1 and on the curve there's only 1 section even though I already selected 3 sections and 3 curves in order. What do you think the problem is? Thank you
i have the samec problem
Hold down the SHIFT button while adding the additional lines.
@@ObiGrantPhoto tHX SOLVE IT
@@ObiGrantPhoto This needs to be pinned lol, thank you years later!
@@ObiGrantPhoto thankyou!
Why i cańt connect more than one slider to the Perp Frame? Thanks it looks awesome!!!
Hold Shift while dragging the slider
at 5:39 - Could anyone say why I can not add multiple number sliders to perpendicular frame as parameter? I can add just one :(
I found the answer here
how to copy number slider??? what you click?
please answer
Hi, thanks for the videos!
Could you please explain how do i change the curve without affecting the position of the perpendicular plain?
Thank in advance!
Thank you for your tutorial, it's amazing.
i have a question, so i did everything you explained but there is a problem that my curves intersection are rotated in minus z direction, i mean instead of being in a right direction they are in the opposit. it seems the bench is rotated. i dont know ehat i did wrong. can you help me out please?
I cant connect more than one number slider into the parameter input on the perp frame componant? This was possible in the video. Any ideas why it wont work? Completed exactly the same steps. Thanks JP
Apologies, answered in the below thread
Seems you have solved the problem😉
hello, when I connect slider to perfram, I can connect only one to parameter, you know why ?
try with merge block
Hi from Argentina! Do you Know how make the surfaces parallels to curve instead of perpendicular? Thanks!
flipped curve to the "Perp Frame", "Perp Frames" and "Sweep 1" its not fliping in opposite direction but flipping in 90 deg.
while i was trying Parametric bench and connecting perp. frame to target the section and xy plane where upside down please give me a solution.
Hi, use "Flip Curve" component and give the flipped curve to the "Perp Frame", "Perp Frames" and "Sweep 1"
@@ParametricHouse Perp. frame and sweep is turning red while moving slider.
very cool, I am curious if it is possible to divide the object so that the distances between the elements are different as well as the thicknesses of these elements
(can it be done easily in a softwere)
hi , any idea why when i connect xy plane to the section / orient, the xy planes are upside-down ? Thanks
I have a problem. When I connect the "Perp Frame" component to "Brep Plane" component, and try to create more sections of the sweep surface, but the result come out is that some sections are not perpendicular to the curve or path, and also not according to the parameter of "count", for example, I input 10, but it output 15 sections, and the 5 more sections are the twisted sections. I tried redraw the path as well as the sections. But it didn't work.
Download the example file for more info.
How can I set the dimensions of the sections? Let's say I want to manufacture the bench using CNC. I would have to make the right calculations and have the dimensions on point. Seating level should be at around 45 cm from ground level, while the thickness of each section should be 2 cm for example. Also the gap between each section should be 1 cm.
How did you duplicate the number slider at 5:26?
just do ctr+c and ctr+v
why is it comming flipped any help appreciated.
Is there not any way to extrude both sides in grasshopper as in rhino, instead of moving and then extruding?
Unfortunatrly no! Grasshopper tries to keep its tools as simple as possible and that's why its powerful! You can combine the move,extrude thing to a new tool and have it for future use!😊
@@ParametricHouse it would be awesome to have a tutorial of that kind of stuff, recomendations of tools and combinations. Thanks you so much for the tutorials that you have been uploading, they are amazing and really easy to understand
Perfect. Thanks!
really nice tutorial thank u
why he puts the command "Move" on 10:55 if he had the algorithm already done?
thank you for the tutorial!!!!!!!!!!!!!!!!!!!!!!!!!
hey bro i tried to use deconstruct brep in the middle of the process, with the generated surfaces but when I tried to selec the vertices grasshopper give me one vertice in other position about the others, can you help me with that ?
Hi, sorry to interrupt, but i am bit wondering do you know why the model is upside down? Thx a lot.
loved it budddy!!!!!!
thanks for the tutorial!!
Thanks for your sharing. But if I want to control the distance of the gap, what I should do? Thanks for your help.
You're welcome , you can go with evaluate length combined with per frame
is it possible to import the curves into rhino and quickly use imported curves? for example, using a 3d scanned curve. ? or do I have to design the curves myself in order to have this functionality? thanks for the advice
I attached rail to perp frames curve but my planes can't be shown on rhino window.. can anyone help me PLEASEEEEEEEEEEEEEEEEEEEE!!!!!!!!!!!!!!
Can i get the software please
For those that had the same problem I had were the the 3 curves were flipped and the comment didnt work for you guys what I did was to rotate the curve in the rhino instead of modifying the grasshopper parametrics. Hope this help you guys.
thanks for the hint :)
How to the measurements the design to cnc
I'm stuck with reversed AND twisted sections. Tried flip plane, flipping the rail, rotating the sections 180 degrees.Tried everything again from the beginning, with special attention to orders and details. Nothing. Could really use some help.
Move the rail in the positive XY axis and see if that helps!
I think I finally know why it is always upside down. you guys can try to flip you rail curve, mine is working now.
Hello, I wonder how can you show the Icon and Name of components at the same time? Thanks a lot.
You need the plug-in "BIFOCALS".
Thank you for the tutorial very helpful! I have an issue with the sections. I am designing a long and curvy bunch and when it's curved the sections are overlapping each other.
It semis there is a problem with the direction. do you have an a solution for it? thanks a lot.
You're welcome...be careful about the curvatures as they can make the sections collide...
How did you set your grasshopper components to read their full names for the inputs/outputs? Mine only reads a single letter for each and i need to hover above it in order to find out which input/output it is
use bifocals
the biggest issue is when I sweep some of the curves goes upside down. It sweeps
fine when I did it manually in rhino.
did you solve it ? I am getting exactly the same issue as you are.
Try putting the rail and the sections in the xy postive location + be sure you draw all the sections in one direction(clockwise for example)
awesome tutor !!
Thanks🙏
I have stuck at this point for last 3 days please help me to resolve this.
I can't find the sweep tool on my grasshopper. please answer!
thank you so much
In first Thank you so much for the tutorial !
Maybe you have some tips to create and export the sections of this kind of parametric creation ?
For example, if I want use a CNC to cut a wood panel to create the bench ?
🙏
I'm planing to add a series of tutorials for fabrication in the near future
hi! did you find how to do it?
flipped curve to the "Perp Frame", "Perp Frames" and "Sweep 1" its not fliping in opposite direction in 90 deg.
question: perp fram could only connect to one number slider, but you can connect to 3 of that,why?
Same problem
Hold shift while you're connecting the number sliders and you can connect as many as you want
I have a problem. When I put the section on the curve. It goes upside down. I don't know how to make it right.
Flip the rail curve so the planes flip upside down!
Parametric House can you tell how to do this? sorry I'm new to grasshopper
Same! How do you flip the rail curve?
thank you for the tutorial very helpful, just got a problem with the surface, "Data conversion failed from Curve to Surface" can you help ?
Maybe the curves are not closed?
In case anyone else had this problem; the conversion between two of my curves caused one of the sections along the rail to not close properly. I identified the area where the conversion was having trouble and when adjusted the points on one my curves, the error went away c:
hi, thanks for the tutorial. problem: when applying the sections to the curves, the middle one twists. result is a twisting shape. any help? thanks in advance
I was having the same issue. I think it has something to do with the direction or flip of the section drawing. I ended up redrawing the sections in the file and the twist went away for me.
weird i cant connect multiple of number slider to the perp frame parameter...
Just hold shift while you're connecting the number sliders
Hey, I’m having an issue with showing the full words of the of the task, I am just getting a D for direction and S for section etc. If you know how to display the full words that would be very helpful to my learning
Hi Bobby👋
Try going to display>full names
is there a way using grasshopper that you could lay the sections onto a plane for CNC ?
of course... we have another tutorial explaining that: parametrichouse.com/parametric-bench-1/
@@ParametricHouse I just followed that link and did it, you are amazing!
How do i create joints though? (i have a similar project i want to build)
Thank you in advance!
thank you for your tutorial. I like the way you explain detail why it done rather just step by step tutorial.it helps a lot. but i have i problem by section are extrude accordingly by the order I draw them. it randomly arrange. maybe u can explain how to make them arrange accordingly.
thanks :) You can sort them with sort along the curve component ...check that out!
How do I flip my "Cplane perpendicular to curve"? My XY is inverted...
You can use rotate plane and rotate it +90 or -90
I can't find any sweep Button
I have rhino 6
Pls help 😭
Hello sir, where Can I find the T spline for rhino 6 ?
i tried to do my own model. but it ended upside down.....lol
why?
ur lesson, is it a lot more intensive?
i flipped a lot of variables, but the most it would do it twist it
Same, my model is upside down
@@TylerHarney i played with the curve. it righted itself. it might be the curve got twisted
Try putting yoir curve in the positive part of the x and y axis
@xica THIS. Huge thank you from 2020.
You’re awesome!
🙏
flipped curve to the "Perp Frame", "Perp Frames" and "Sweep 1" i didn't get it properly bcoz flip curve to Perp frame upto this is ok.
why icant unit lines? and make curve
Hi, why it doesn't work if I put more than 3 sections? thanks for the wonderful tutorial!
You need to put as much Paramater sliders in the pframe acordind to the number of sections you have
I'm getting only one number slider pls help
when dragging the other two sliders you will need to hold SHIFT key. try it.
@@raywong3184 I tried this thing, but not work
Do u mean you want to connect two number sliders to an input? Hold down shift for several outputs to one input..also watch the grasshopper basics for more info about how grasshopper works
@@ParametricHouse OK bro thanks its helpful
when i connect brep plan with surface it make surface error????
???
Hi, it says data conversion failed from curve to surface, when i add the surface. Please help.
Make sure that your line drawings don't have any duplicated lines and that they are joined together. Clear all values in grasshopper and go back and select each line to make sure they aren't overlapping. I had the same problem and that fixed it for me
👍
you go so quick! for somebody new this is hard to follow
How to save file as dxf for cnc machine
First you should use "Orient" component and do the nesting process. This tutorial might help for that:
parametrichouse.com/parametric-bench-1/
Then you can easily bake the sections and export them from Rhino as a dxf file.
i got it an thanks you.
@@MrJeeten15 You're welcome :)
how to change the xy direction of perp frame?
Simply use the flip plane component if you want to change the Z direction. Yo can also use the deconstruct plane to access the vectors.
I just don't really understand how Graft works, but really nice tutorial, thanks!!!
what should i do if i want to apply this to a closed polysurface that was not created using grasshopper??
Thanks man
🙏
unable to connect 3 of number slider
to one \
Hi Musafar
You should Hold down the shift key and connect to the inputs if you have more than one output!
my brep/ plane component breaks my surface component because the surface component wants a surface input
Here i am sending you a pic where i am little bit confusion as well as will working on xy plan sweep rail is getting opposite direction means 180 degrees or please if you are comfortable please send me an email id where i can upload a image where i am going wrong.
I still dont know how to flip the direction.....
Download the examples where? At where? Aaaaaahhhhhh what a great cliffhanger. #😣
:) I added the link!
Parametric House thank you sir.
i love you
link doesn't work!!!
I double checked the link and it's working.
牛逼 你是大神
thx, man...like
Welcome
que pro waza wazaaaaaa
Something some where i am missing.
Check out the tutorial for parametric furniture using rhino grasshopper 🙌 ruclips.net/video/fWGgFCQznXA/видео.html
讲解的很好，可是我的工作平面似乎不是很听话。
我的也是
Download the example at :
parametrichouse.com/parametric-bench/
Want to learn Grasshopper, step by step? Check out our Grasshopper Course at:
parametrichouse.com/course-grasshopper/
I think 100% people confuse at 4:34
nah
you're too fast
doenst' look very comfortable to sit on!
and it will make your jeans look like cords, lol.