Nissan Patrol Y60 restoration | Setting up steering damper and other stuff #29
HTML-код
- Опубликовано: 15 окт 2024
- So my small project is getting professional parts. My new favorite company IOD Performance from Poland. They have some insane stuff, for instance Frame! That got my mind blown. On my project side I finally am ready to put in the engine. Hope that will happen soon, because not sure when I can get the engine lift, but as always I will inform you when it is done.
IOD Performance: (This isn't paid or sponsored advertising, just saying how I feel, so don't start with me RUclips)
iodshop.pl/
/ iodengineering
Nissan Patrol Y60 restoration | Setting up steering damper and other stuff #29
In case anyone is interested in anything specific in my project or just Patrol in general, please comment and I will try to capture more info on the subject. Also if you like to see more don't forget to subscribe and leave a like to support the channel.
If you want to support me in any other way or just want to contact me, email is found in channels information, or use any other social network I have.
========================
Social Media:
Twitter: / thecrazylatvian
Facebook Page: / thecrazylatvian
Instagram: / thecrazylatvian
========================
Music Licence:
Dreamer by Pyrosion / pyrosion
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/DreamerP...
Music promoted by Audio Library • Dreamer - Pyrosion (No...
Martin hope you did not forget to put a little grease to the those 555 joints. There is a calamite ind in joint you have to iscrew an put a grease.
I will check, it had some in it, but maybe need to add a bit more, just to be safe!
What vehicle does the ball joint box says its for? Is it Patrol specific or applicable to other trucks?
@@cidadaodorense3231 There is no specifications on packaging. There isn't anything about it being specifically for Patrol. From what I see it is pretty standard looking. The ends I can measure if needed (That part what goes trough the hole on steering stuff and wheel)
Thank you, no need to measure. I can do that with the original one here. The idea I had was if it was labeled for a Toyota this, Mitsubishi that, etc, it would be something I would easily find on parts stores here.
@@cidadaodorense3231 Only thing I found on a packaging is that it is made in Japan (maybe the packaging). So I believe it also goes for Toyota and Mitsubishi. But on the other hand, by searching for "SE-N623" the code I found on a box. In my local sites it shows Nissan Patrol. So maybe it is specific...
5:16 What was the situation with old rubber brake line?
Does old one was a good fit with this suspension configuration?
Keep in mind that when you will put back on that chassis engine, gearbox and all the body.
It will be lower due to weight that all will add.
Yeah currently I'm not touching brake lines any more, because for 2" lift in my knowledge I don't need to extend the brake lines. Like you say I will add all the weight on the frame and then if needed I will just change the mount position to fit my needs.
like for BADBOY lawnmower 😂
Absolute UNIT! Wait for the action, we need to go offroading with that bad boy :D
@@thecrazylatvian we need to make a lawnmower race 2020!
@@trackdayer2550 Hell Yeah!
@@trackdayer2550 Which one of you will be first with video how to put a turbocharger and a Dry NOS system on a lawnmower engine? :D